Macro Merica 'SMA Style' Canopy - Fits 03 Air Unit Macro Merica 'SMA Style' Canopy - Fits 03 Air Unit Catalyst Machineworks   Looking for the best 03 Air Unit experience on the market? Look no further. This canopy fits our Merica 7" - 10" frame and perfectly houses the 03 Air Unit from DJI. With this canopy you ditch the crap stock antenna and instead replace it with a couple long range SMA style FPV antennas. The antennas are held firmly in place and stress relieved by a couple zip ties that run around each antenna and through the thick walls of the canopy. To facilitate antenna mounting you will need SMA to u.fl adapters that can be located HERE. The u.fl portion of the adapters will mount straight into the AU. The air unit itself mounts to the plastic adapter plate via double sided tape which then joins to the underside of the canopy using included self tapping screws. You have full access to the SD card slot and USB-C on the side of the AU. Enjoy full range of camera angle adjustment from 30 to 60 degrees. The soft TPU canopy serves as an effective shield from resonance issues reaching the IMU inside the 03 FPV camera.  Features:  Sleek and sexy look Accepts two SMA type antennas Nearly indestructible Light weight yet strong AF Aerodynamic  Available in multiple colors  Fits ONLY the 03 Air Unit from DJI Full access to the SD card and USB-C Specs:  FPV antennas NOT INCLUDED u.fl to SMA adapters NOT INCLUDED Weight: 35g Fits both the 7" - 10" frames Camera min/max camera angle: 30 - 60 degree Includes:  1 x 3D printed canopy4 x M2 Washer 4 x M2 X 5mm Socket Screw 2 x Self Tapping Screw #2 x 7/16" long 2 x Self Tapping Screw #2 x 5/16" long 1 x 03 Air Unit Adapter Plate      

Macro Merica 'SMA Style' Canopy - Fits 03 Air Unit

Code: CM02610

 

Looking for the best 03 Air Unit experience on the market? Look no further. This canopy fits our Merica 7" - 10" frame and perfectly houses the 03 Air Unit from DJI. With this canopy you ditch the crap stock antenna and instead replace it with a couple long range SMA style FPV antennas. The antennas are held firmly in place and stress relieved by a couple zip ties that run around each antenna and through the thick walls of the canopy. To facilitate antenna mounting you will need SMA to u.fl adapters that can be located HERE. The u.fl portion of the adapters will mount straight into the AU. The air unit itself mounts to the plastic adapter plate via double sided tape which then joins to the underside of the canopy using included self tapping screws. You have full access to the SD card slot and USB-C on the side of the AU. Enjoy full range of camera angle adjustment from 30 to 60 degrees. The soft TPU canopy serves as an effective shield from resonance issues reaching the IMU inside the 03 FPV camera. 


Features: 

  • Sleek and sexy look
  • Accepts two SMA type antennas
  • Nearly indestructible
  • Light weight yet strong AF
  • Aerodynamic 
  • Available in multiple colors 
  • Fits ONLY the 03 Air Unit from DJI
  • Full access to the SD card and USB-C

Specs: 

  • FPV antennas NOT INCLUDED
  • u.fl to SMA adapters NOT INCLUDED
  • Weight: 35g
  • Fits both the 7" - 10" frames
  • Camera min/max camera angle: 30 - 60 degree

Includes: 

1 x 3D printed canopy
4 x M2 Washer
4 x M2 X 5mm Socket Screw 
2 x Self Tapping Screw #2 x 7/16" long 
2 x Self Tapping Screw #2 x 5/16" long 
1 x 03 Air Unit Adapter Plate

 

 


 

 

Looking for the best 03 Air Unit experience on the market? Look no further. This canopy fits our Merica 7" - 10" frame and perfectly houses the 03 Air Unit from DJI. With this canopy you ditch the crap stock antenna and instead replace it with a couple long range SMA style FPV antennas. The antennas are held firmly in place and stress relieved by a couple zip ties that run around each antenna and through the thick walls of the canopy. To facilitate antenna mounting you will need SMA to u.fl adapters that can be located HERE. The u.fl portion of the adapters will mount straight into the AU. The air unit itself mounts to the plastic adapter plate via double sided tape which then joins to the underside of the canopy using included self tapping screws. You have full access to the SD card slot and USB-C on the side of the AU. Enjoy full range of camera angle adjustment from 30 to 60 degrees. The soft TPU canopy serves as an effective shield from resonance issues reaching the IMU inside the 03 FPV camera. 


Features: 

  • Sleek and sexy look
  • Accepts two SMA type antennas
  • Nearly indestructible
  • Light weight yet strong AF
  • Aerodynamic 
  • Available in multiple colors 
  • Fits ONLY the 03 Air Unit from DJI
  • Full access to the SD card and USB-C

Specs: 

  • FPV antennas NOT INCLUDED
  • u.fl to SMA adapters NOT INCLUDED
  • Weight: 35g
  • Fits both the 7" - 10" frames
  • Camera min/max camera angle: 30 - 60 degree

Includes: 

1 x 3D printed canopy
4 x M2 Washer
4 x M2 X 5mm Socket Screw 
2 x Self Tapping Screw #2 x 7/16" long 
2 x Self Tapping Screw #2 x 5/16" long 
1 x 03 Air Unit Adapter Plate