WhoopMaster 4 All Weather Upgrade WhoopMaster 4 All Weather Upgrade Catalyst Machineworks This upgrade allow you to build your WhoopMaster into all All Weather whoop. With this upgrade you can fly in rain, snow, mist, etc... This means the electronics are housed in an enclosure that is highly water resistant. The ESC is mounted to an aluminum midplate which serves to both seal the bottom side of the enclosure and pull heat away from the ESC. The VTX is mounted to an aluminum heat sink that serves to seal the top portion of the enclosure and pull heat away from the VTX. We will be producing a full detailed video tutorial on how to install this into your WhoopMaster. This kit will only work with a 20x20mm micro ESC/FC stack and either the Caddx Vista or Runcam Link HD systems. You can mount a receiver inside the enclosure but keep in mind accessing the RX bind bottom will be cumbersome after the enclosure is buttoned up. For each access to your receiver at any time we suggest THIS box made specifically for it!  Includes: 1 pc: Machined 7075 silver aluminum midplate (heat sink)1 pc: Machined 7075 silver aluminum top plate (heat sink)1 pc: Water resistant TPU enclosure skirt (pic color)2 pcs: ESC motor wire grommet  4 pcs: #2 x 5/16" long self tapping phillip head screw 4 pcs: M3 plastic nut4 pcs: M3 X 3mm white plastic sleeve4 pcs: M2 X 6MM screw    Not included but required: Thermal Adhesive Tape Silicone Sealant Thermal pad 2mm thick (preferred) or Non-conductive thermal paste  Micro USB remote cable extension. (This is required to allow you to access the FC USB port without having to open up your all weather enclosure! We only sell a solution for micro USB. If your FC uses USB C you will need to source your own extension.)   ***DO NOT SUBMERGE YOUR WHOOPMASTER IN WATER. THIS KIT IS NOT DESIGNED FOR PRESSURIZED WATER***    

WhoopMaster 4 All Weather Upgrade

Code: CM02035

This upgrade allow you to build your WhoopMaster into all All Weather whoop. With this upgrade you can fly in rain, snow, mist, etc... This means the electronics are housed in an enclosure that is highly water resistant. The ESC is mounted to an aluminum midplate which serves to both seal the bottom side of the enclosure and pull heat away from the ESC. The VTX is mounted to an aluminum heat sink that serves to seal the top portion of the enclosure and pull heat away from the VTX. We will be producing a full detailed video tutorial on how to install this into your WhoopMaster. This kit will only work with a 20x20mm micro ESC/FC stack and either the Caddx Vista or Runcam Link HD systems. You can mount a receiver inside the enclosure but keep in mind accessing the RX bind bottom will be cumbersome after the enclosure is buttoned up. For each access to your receiver at any time we suggest THIS box made specifically for it! 

Includes:

1 pc: Machined 7075 silver aluminum midplate (heat sink)
1 pc: Machined 7075 silver aluminum top plate (heat sink)
1 pc: Water resistant TPU enclosure skirt (pic color)
2 pcs: ESC motor wire grommet 
4 pcs: #2 x 5/16" long self tapping phillip head screw 
4 pcs: M3 plastic nut

4 pcs: M3 X 3mm white plastic sleeve
4 pcs: M2 X 6MM screw 

 

Not included but required:

Thermal Adhesive Tape 
Silicone Sealant 
Thermal pad 2mm thick (preferred) or Non-conductive thermal paste 

Micro USB remote cable extension. (This is required to allow you to access the FC USB port without having to open up your all weather enclosure! We only sell a solution for micro USB. If your FC uses USB C you will need to source your own extension.)

 

***DO NOT SUBMERGE YOUR WHOOPMASTER IN WATER. THIS KIT IS NOT DESIGNED FOR PRESSURIZED WATER***

 

 

This upgrade allow you to build your WhoopMaster into all All Weather whoop. With this upgrade you can fly in rain, snow, mist, etc... This means the electronics are housed in an enclosure that is highly water resistant. The ESC is mounted to an aluminum midplate which serves to both seal the bottom side of the enclosure and pull heat away from the ESC. The VTX is mounted to an aluminum heat sink that serves to seal the top portion of the enclosure and pull heat away from the VTX. We will be producing a full detailed video tutorial on how to install this into your WhoopMaster. This kit will only work with a 20x20mm micro ESC/FC stack and either the Caddx Vista or Runcam Link HD systems. You can mount a receiver inside the enclosure but keep in mind accessing the RX bind bottom will be cumbersome after the enclosure is buttoned up. For each access to your receiver at any time we suggest THIS box made specifically for it! 

Includes:

1 pc: Machined 7075 silver aluminum midplate (heat sink)
1 pc: Machined 7075 silver aluminum top plate (heat sink)
1 pc: Water resistant TPU enclosure skirt (pic color)
2 pcs: ESC motor wire grommet 
4 pcs: #2 x 5/16" long self tapping phillip head screw 
4 pcs: M3 plastic nut

4 pcs: M3 X 3mm white plastic sleeve
4 pcs: M2 X 6MM screw 

 

Not included but required:

Thermal Adhesive Tape 
Silicone Sealant 
Thermal pad 2mm thick (preferred) or Non-conductive thermal paste 

Micro USB remote cable extension. (This is required to allow you to access the FC USB port without having to open up your all weather enclosure! We only sell a solution for micro USB. If your FC uses USB C you will need to source your own extension.)

 

***DO NOT SUBMERGE YOUR WHOOPMASTER IN WATER. THIS KIT IS NOT DESIGNED FOR PRESSURIZED WATER***