Runcam Mini Merica Canopy System Runcam Mini Merica Canopy System Catalyst Machineworks This canopy will only fit the Runcam Split Mini. It will not fit the Runcam Split 2.  Looking for the best SPLIT Mini mount on planet earth? Well here it is. We call this a "system" because it comes with more than just a 3D printed TPU canopy. This is a full set of parts to allow you to fit the Runcam Split mini into your Merica 4" - 6" and use a 'standard sized' flight controller board. Both the Split circuit boards and the FC board are housed in the same canopy. We include all the hardware you need. The canopy will allow the split lens to be adjusted from an angle range of 20 - 65 degrees within seconds. This canopy has a beefy shroud designed to protect the lens from damage. All the split's buttons and SD card slot are accessible. The part itself is made from a highly crash resilient 3D printed TPU material. Available colors are black, red, blue, purple, yellow, orange, pink, green, white, and clear. Last but not least...there are NO PROPS IN THE HD FOOTAGE.  Features:  Excellent camera and lens protection  NO PROPS IN THE HD FOOTAGE (above 25 degree camera tilt) Sleek and sexy look Crash tough Light weight  Aerodynamic  Available in multiple colors  Same pod fits Merica 4" through Merica 6" Wide range of lens angle adjustment  Easy access to all buttons Easy access to SD car slot Fits "standard" 30.5mm x 30.5mm FC's  Specs:  Weight: 21g (+/- 1g) Material: 3D Printed TPU Camera angle range: 20 - 65 degrees Camera Requirement: Runcam Split Mini Flight Controller Requirement: 30.5mm x 30.5mm mounting  Includes:  1 - 3D printed TPU canopy 4 - M3 X 8mm Socket Head Screws 4 - M2.5 X 4.5mm OD x 3mm Long Spacer (Aluminum) 2 - M2 X 6mm Socket Head Screws 4 - M2 X 12mm Torx Head Screws 2 - M2 Washers Assembly Steps <----Hit this link to find out the meaning of life.                           

Runcam Mini Merica Canopy System

Code: CM00805
$19.99
In Stock
Add to Wishlist Add to Compare

This canopy will only fit the Runcam Split Mini. It will not fit the Runcam Split 2. 

Looking for the best SPLIT Mini mount on planet earth? Well here it is. We call this a "system" because it comes with more than just a 3D printed TPU canopy. This is a full set of parts to allow you to fit the Runcam Split mini into your Merica 4" - 6" and use a 'standard sized' flight controller board. Both the Split circuit boards and the FC board are housed in the same canopy. We include all the hardware you need. The canopy will allow the split lens to be adjusted from an angle range of 20 - 65 degrees within seconds. This canopy has a beefy shroud designed to protect the lens from damage. All the split's buttons and SD card slot are accessible. The part itself is made from a highly crash resilient 3D printed TPU material. Available colors are black, red, blue, purple, yellow, orange, pink, green, white, and clear. Last but not least...there are NO PROPS IN THE HD FOOTAGE. 

Features: 

  • Excellent camera and lens protection 
  • NO PROPS IN THE HD FOOTAGE (above 25 degree camera tilt)
  • Sleek and sexy look
  • Crash tough
  • Light weight 
  • Aerodynamic 
  • Available in multiple colors 
  • Same pod fits Merica 4" through Merica 6"
  • Wide range of lens angle adjustment 
  • Easy access to all buttons
  • Easy access to SD car slot
  • Fits "standard" 30.5mm x 30.5mm FC's 

Specs: 

  • Weight: 21g (+/- 1g)
  • Material: 3D Printed TPU
  • Camera angle range: 20 - 65 degrees
  • Camera Requirement: Runcam Split Mini
  • Flight Controller Requirement: 30.5mm x 30.5mm mounting 

Includes: 

1 - 3D printed TPU canopy

4 - M3 X 8mm Socket Head Screws

4 - M2.5 X 4.5mm OD x 3mm Long Spacer (Aluminum)

2 - M2 X 6mm Socket Head Screws

4 - M2 X 12mm Torx Head Screws

2 - M2 Washers

Assembly Steps <----Hit this link to find out the meaning of life. 

 

 

 

 

 

 

 

 

 

 

 

 

 

This canopy will only fit the Runcam Split Mini. It will not fit the Runcam Split 2. 

Looking for the best SPLIT Mini mount on planet earth? Well here it is. We call this a "system" because it comes with more than just a 3D printed TPU canopy. This is a full set of parts to allow you to fit the Runcam Split mini into your Merica 4" - 6" and use a 'standard sized' flight controller board. Both the Split circuit boards and the FC board are housed in the same canopy. We include all the hardware you need. The canopy will allow the split lens to be adjusted from an angle range of 20 - 65 degrees within seconds. This canopy has a beefy shroud designed to protect the lens from damage. All the split's buttons and SD card slot are accessible. The part itself is made from a highly crash resilient 3D printed TPU material. Available colors are black, red, blue, purple, yellow, orange, pink, green, white, and clear. Last but not least...there are NO PROPS IN THE HD FOOTAGE. 

Features: 

  • Excellent camera and lens protection 
  • NO PROPS IN THE HD FOOTAGE (above 25 degree camera tilt)
  • Sleek and sexy look
  • Crash tough
  • Light weight 
  • Aerodynamic 
  • Available in multiple colors 
  • Same pod fits Merica 4" through Merica 6"
  • Wide range of lens angle adjustment 
  • Easy access to all buttons
  • Easy access to SD car slot
  • Fits "standard" 30.5mm x 30.5mm FC's 

Specs: 

  • Weight: 21g (+/- 1g)
  • Material: 3D Printed TPU
  • Camera angle range: 20 - 65 degrees
  • Camera Requirement: Runcam Split Mini
  • Flight Controller Requirement: 30.5mm x 30.5mm mounting 

Includes: 

1 - 3D printed TPU canopy

4 - M3 X 8mm Socket Head Screws

4 - M2.5 X 4.5mm OD x 3mm Long Spacer (Aluminum)

2 - M2 X 6mm Socket Head Screws

4 - M2 X 12mm Torx Head Screws

2 - M2 Washers

Assembly Steps <----Hit this link to find out the meaning of life.