Merica (3 to 3.5 inch) - no canopy Merica (3 to 3.5 inch) - no canopy Catalyst Machineworks THE MERICA LINE OF FRAMES COMES WITH NO CANOPY BY DEFAULT. YOU NEED TO PURCHASE ONE TO GO ALONG WITH YOUR FRAME. GET ONE HERE! <----- HIT THIS LINK Why did we decide to call this pinnacle of FPV racing technology the "Merica"? Because Catalyst Machineworks is lucky enough to be based in the greatest country on planet earth. Are we ridiculously proud of the USA? Heck yeah we are! Can you smell all that freedom and liberty? Smells delicious, like apple pies and hot dogs! Thanks to all our US military service men and women who fight to keep us free. Some of which have given their lives to protect us. This frame was named in your honor. The 'Merica was born directly from customer feedback and our own internal race pilot testing and requests. We actually listen to pilot feedback and implement some of those ideas into our designs. This machine has some very unique and innovative pilot inspired features built in. Light weight: Dry frame weight with all included fasteners and canopy comes to only 42g.  Quick change modular arms:  The Merica's arms are removable. They are held to the center fuselage by two screws. Field removal is super fast and can be completed within 5 minutes. Simply remove the outer screw, loosen the inner screw, remove the motor, and the arm is off.  Affordable frame pricing: At only $59.99 (after canopy purchase) you are getting a TON of features and racer inspired technology. You get what you pay for and MORE!  Affordable spare parts: Replacement 3.5mm arms are only $3.50 each.  Low aerodynamic drag: This frame uses an aerodynamically efficient arm design that is thin without sacrificing crash durability. Standard with the kit are 3.5mm thick arms. Arm design is not the only contributing factor for great aero. You also need a 'slippery' center fuselage that gives as little resistance to the oncoming air as possible. Merica's 'head' is a TPU canopy that is designed to have a very low drag coefficient.  Build in flight controller/camera soft mount: The flight controller and FPV camera are mounted to the TPU canopy. You read that correct. The FC is NOT mounted to the carbon fiber frame. Mounting the FC to the TPU canopy means that any board you choose is soft mounted by default. The canopy is made of a flexible material and works to de-couple the board from the motors. The FPV camera is mounted at the top of the canopy. This mounting scenario helps to dampen vibration before it reaches your camera.  Ample space to fit standard sized components: Plenty of space to fit 'standard sized' components with 30.5mm x 30.5mm mounting holes. 4-in-1 ESC's are ideal with this frame. AIO FC/ESC/PDB's such as the Asgard can be used as well. There are also 20mm x 20mm mounting holes for micro AIO ESC's, and with THIS adapter you can mount in a micro FC.  Excellent crash durability: The Merica comes standard with high quality 4mm thick arms. Carbon fiber grain direction in aligned with the length of the arm for maximum crash toughness and rigidity. The entire top section of the frame is a flexible TPU canopy. During a crash this structure will move and give instead of breaking like a carbon fiber top plate.  Clean air for the rear props:  This frame takes the stretch X design even farther and staggers the front and rear arms with respect to each other. The front arms sit at a lower elevation than the rear which helps to get more 'clean air' to the rear props.  ***Please note electronics are not included with this frame. Electronics are sold separately*** Specs:  42 grams (with fasteners and canopy) Carbon Fiber: Twill Weave 3K Matte Canopy Material: TPU (multiple colors available) CF Arm Thickness: 3.5mm Top CF Sandwich Plate: 2mm Bottom CF Sandwich Plate: 1.5mm Frame Type: XL (with staggered arms front to rear) Frame Size: 148mm Camera Angle Range: 10 - 75 degrees Motors supported: 1407 (ideal), 1306, 1507, and similar  Lipos supported: 3s, 4s, 5s, 6s  Lipo mounting position: Bottom  Prop Size: 3 inch to 3.5 inch (Yes it will fit up to 3.5" props!) Fastener Material: Aircraft Grade 7075 Fastener Color: Black Ideal ESC: 4-in-1 design with 30.5mm x 30.5mm M3 mounting holes Ideal FC: 30.5mm x 30.5mm M3 mounting holes (micro FC can be used with THIS adapter) Motor pad mounting holes: M2 screws on 12mm mounting circle  Supported FPV Cameras: Runcam Swift Micro or Foxeer Arrow Micro TPU canopy sold separate RcGroups Thread Merica 3 Inch Assembly Manual Merica 3 Inch Bill of Material Merica 3 Inch Spare Parts      

Merica (3 to 3.5 inch) - no canopy

Code: CM00591

THE MERICA LINE OF FRAMES COMES WITH NO CANOPY BY DEFAULT. YOU NEED TO PURCHASE ONE TO GO ALONG WITH YOUR FRAME. GET ONE HERE! <----- HIT THIS LINK

Why did we decide to call this pinnacle of FPV racing technology the "Merica"? Because Catalyst Machineworks is lucky enough to be based in the greatest country on planet earth. Are we ridiculously proud of the USA? Heck yeah we are! Can you smell all that freedom and liberty? Smells delicious, like apple pies and hot dogs! Thanks to all our US military service men and women who fight to keep us free. Some of which have given their lives to protect us. This frame was named in your honor.

The 'Merica was born directly from customer feedback and our own internal race pilot testing and requests. We actually listen to pilot feedback and implement some of those ideas into our designs. This machine has some very unique and innovative pilot inspired features built in.

Light weight:

Dry frame weight with all included fasteners and canopy comes to only 42g. 

Quick change modular arms: 

The Merica's arms are removable. They are held to the center fuselage by two screws. Field removal is super fast and can be completed within 5 minutes. Simply remove the outer screw, loosen the inner screw, remove the motor, and the arm is off. 

Affordable frame pricing:

At only $59.99 (after canopy purchase) you are getting a TON of features and racer inspired technology. You get what you pay for and MORE! 

Affordable spare parts:

Replacement 3.5mm arms are only $3.50 each. 

Low aerodynamic drag:

This frame uses an aerodynamically efficient arm design that is thin without sacrificing crash durability. Standard with the kit are 3.5mm thick arms. Arm design is not the only contributing factor for great aero. You also need a 'slippery' center fuselage that gives as little resistance to the oncoming air as possible. Merica's 'head' is a TPU canopy that is designed to have a very low drag coefficient. 

Build in flight controller/camera soft mount:

The flight controller and FPV camera are mounted to the TPU canopy. You read that correct. The FC is NOT mounted to the carbon fiber frame. Mounting the FC to the TPU canopy means that any board you choose is soft mounted by default. The canopy is made of a flexible material and works to de-couple the board from the motors. The FPV camera is mounted at the top of the canopy. This mounting scenario helps to dampen vibration before it reaches your camera. 

Ample space to fit standard sized components:

Plenty of space to fit 'standard sized' components with 30.5mm x 30.5mm mounting holes. 4-in-1 ESC's are ideal with this frame. AIO FC/ESC/PDB's such as the Asgard can be used as well. There are also 20mm x 20mm mounting holes for micro AIO ESC's, and with THIS adapter you can mount in a micro FC. 

Excellent crash durability:

The Merica comes standard with high quality 4mm thick arms. Carbon fiber grain direction in aligned with the length of the arm for maximum crash toughness and rigidity. The entire top section of the frame is a flexible TPU canopy. During a crash this structure will move and give instead of breaking like a carbon fiber top plate. 

Clean air for the rear props: 

This frame takes the stretch X design even farther and staggers the front and rear arms with respect to each other. The front arms sit at a lower elevation than the rear which helps to get more 'clean air' to the rear props.

 ***Please note electronics are not included with this frame. Electronics are sold separately***

Specs: 

  • 42 grams (with fasteners and canopy)
  • Carbon Fiber: Twill Weave 3K Matte
  • Canopy Material: TPU (multiple colors available)
  • CF Arm Thickness: 3.5mm
  • Top CF Sandwich Plate: 2mm
  • Bottom CF Sandwich Plate: 1.5mm
  • Frame Type: XL (with staggered arms front to rear)
  • Frame Size: 148mm
  • Camera Angle Range: 10 - 75 degrees
  • Motors supported: 1407 (ideal), 1306, 1507, and similar 
  • Lipos supported: 3s, 4s, 5s, 6s 
  • Lipo mounting position: Bottom 
  • Prop Size: 3 inch to 3.5 inch (Yes it will fit up to 3.5" props!)
  • Fastener Material: Aircraft Grade 7075
  • Fastener Color: Black
  • Ideal ESC: 4-in-1 design with 30.5mm x 30.5mm M3 mounting holes
  • Ideal FC: 30.5mm x 30.5mm M3 mounting holes (micro FC can be used with THIS adapter)
  • Motor pad mounting holes: M2 screws on 12mm mounting circle 
  • Supported FPV Cameras: Runcam Swift Micro or Foxeer Arrow Micro
  • TPU canopy sold separate

RcGroups Thread

Merica 3 Inch Assembly Manual

Merica 3 Inch Bill of Material

Merica 3 Inch Spare Parts

 

 

 

THE MERICA LINE OF FRAMES COMES WITH NO CANOPY BY DEFAULT. YOU NEED TO PURCHASE ONE TO GO ALONG WITH YOUR FRAME. GET ONE HERE! <----- HIT THIS LINK

Why did we decide to call this pinnacle of FPV racing technology the "Merica"? Because Catalyst Machineworks is lucky enough to be based in the greatest country on planet earth. Are we ridiculously proud of the USA? Heck yeah we are! Can you smell all that freedom and liberty? Smells delicious, like apple pies and hot dogs! Thanks to all our US military service men and women who fight to keep us free. Some of which have given their lives to protect us. This frame was named in your honor.

The 'Merica was born directly from customer feedback and our own internal race pilot testing and requests. We actually listen to pilot feedback and implement some of those ideas into our designs. This machine has some very unique and innovative pilot inspired features built in.

Light weight:

Dry frame weight with all included fasteners and canopy comes to only 42g. 

Quick change modular arms: 

The Merica's arms are removable. They are held to the center fuselage by two screws. Field removal is super fast and can be completed within 5 minutes. Simply remove the outer screw, loosen the inner screw, remove the motor, and the arm is off. 

Affordable frame pricing:

At only $59.99 (after canopy purchase) you are getting a TON of features and racer inspired technology. You get what you pay for and MORE! 

Affordable spare parts:

Replacement 3.5mm arms are only $3.50 each. 

Low aerodynamic drag:

This frame uses an aerodynamically efficient arm design that is thin without sacrificing crash durability. Standard with the kit are 3.5mm thick arms. Arm design is not the only contributing factor for great aero. You also need a 'slippery' center fuselage that gives as little resistance to the oncoming air as possible. Merica's 'head' is a TPU canopy that is designed to have a very low drag coefficient. 

Build in flight controller/camera soft mount:

The flight controller and FPV camera are mounted to the TPU canopy. You read that correct. The FC is NOT mounted to the carbon fiber frame. Mounting the FC to the TPU canopy means that any board you choose is soft mounted by default. The canopy is made of a flexible material and works to de-couple the board from the motors. The FPV camera is mounted at the top of the canopy. This mounting scenario helps to dampen vibration before it reaches your camera. 

Ample space to fit standard sized components:

Plenty of space to fit 'standard sized' components with 30.5mm x 30.5mm mounting holes. 4-in-1 ESC's are ideal with this frame. AIO FC/ESC/PDB's such as the Asgard can be used as well. There are also 20mm x 20mm mounting holes for micro AIO ESC's, and with THIS adapter you can mount in a micro FC. 

Excellent crash durability:

The Merica comes standard with high quality 4mm thick arms. Carbon fiber grain direction in aligned with the length of the arm for maximum crash toughness and rigidity. The entire top section of the frame is a flexible TPU canopy. During a crash this structure will move and give instead of breaking like a carbon fiber top plate. 

Clean air for the rear props: 

This frame takes the stretch X design even farther and staggers the front and rear arms with respect to each other. The front arms sit at a lower elevation than the rear which helps to get more 'clean air' to the rear props.

 ***Please note electronics are not included with this frame. Electronics are sold separately***

Specs: 

  • 42 grams (with fasteners and canopy)
  • Carbon Fiber: Twill Weave 3K Matte
  • Canopy Material: TPU (multiple colors available)
  • CF Arm Thickness: 3.5mm
  • Top CF Sandwich Plate: 2mm
  • Bottom CF Sandwich Plate: 1.5mm
  • Frame Type: XL (with staggered arms front to rear)
  • Frame Size: 148mm
  • Camera Angle Range: 10 - 75 degrees
  • Motors supported: 1407 (ideal), 1306, 1507, and similar 
  • Lipos supported: 3s, 4s, 5s, 6s 
  • Lipo mounting position: Bottom 
  • Prop Size: 3 inch to 3.5 inch (Yes it will fit up to 3.5" props!)
  • Fastener Material: Aircraft Grade 7075
  • Fastener Color: Black
  • Ideal ESC: 4-in-1 design with 30.5mm x 30.5mm M3 mounting holes
  • Ideal FC: 30.5mm x 30.5mm M3 mounting holes (micro FC can be used with THIS adapter)
  • Motor pad mounting holes: M2 screws on 12mm mounting circle 
  • Supported FPV Cameras: Runcam Swift Micro or Foxeer Arrow Micro
  • TPU canopy sold separate

RcGroups Thread

Merica 3 Inch Assembly Manual

Merica 3 Inch Bill of Material

Merica 3 Inch Spare Parts