The Shocker 4”/5” Ultralight Long Range + Freestyle Frame The Shocker 4”/5” Ultralight Long Range + Freestyle Frame Catalyst Machineworks This frame fits the DJI 03 / Walksnail FPV air units. Have you heard of the new spec of ultralight long range and freestyle HD rigs taking the FPV world by storm? We have designed our own offering which of course will blow your mind with it's superior design elements. Are you shocked? You will be soon. We are busy building this product page over the next couple days. Stay tuned for all the details to appear and pre-order to open. Below is the basic info:  What is a HD long range ultralight? This is a new class of drone thought up by a guy in Europe that goes by the name of "Dave_C_FPV". It involves uses a crazy light weight freestyle type of frame design (60g max). You then stuff inside a Caddx vista, micro stack, 2004, 1805, 1806, or other light weight motors, 5" or 4" T mount props, and a 650mah to 850mah 4s or 1050mah 6s lipo. Some pilots use crossfire and GPS for LR flights. These builds are so light and efficient they can fly for very long durations (10 minutes, or even more depending on setup) allowing you to go on long range adventures in beautiful HD. How much will we charge for this frame? We are still figuring that out but it will be less than 1 million dollars.    Features:  Crazy light weight frame Designed for cruising long range flights in beautiful HD Very tough for it's weight Easy access to components for field repairs Quick swap arm design Designed to fit the DJI 03 FPV, Walksnail FPV, analog FPV, Caddx / RunCam HD FPV and some of the Shark Byte HD FPV systems. Lots of available accessories  Optional colored Aluminum screw set available (save weight!)  Lots of deck space for large lipos 2 velcro straps hold the lipo firmly in place Superior FPV camera protection  Wide range of FPV camera adjustment  Available in 4" and 5" prop versions  Two screw arm removal. Remove arms be loosening one screw and removing the other No arm "slop" Industry leading camera protection (FPV) Provisions for crossfire gear  Mount options coming soon for GoPro 9, GoPro 8, GoPro 6/7, session, and insta 360 cams Superior Catalyst Machineworks design Superior Catalyst Machineworks customer support Electronics sold separate  Specs  THIS FRAME INCLUDES BLACK ALUMINUM SCREWS AND STEEL ARM SCREWS. PURPLE SCREWS SHOWN IN THE PICS ARE NOT INCLUDED AS STANDARD. THEY ARE AVAILABLE AS AN OPTIONAL ACCESSORY.  5" Weight: 52g (optional aluminum arm screws), 55g (standard steel arm screws) 4" Weight: 44.7g (optional aluminum arm screws), 48.5g (standard steel arm screws) Carbon fiber: Twill Weave 3K Matte Standoff color: Matte black CF Arms: 4mm thick (5" version), 3mm thick (4" version) Top CF plate: 2mm Side CF cage plates: 1.5mm Front brace: 2mm Optional rear brace (sold separate): 2mm Frame type: 'dead cat' quad Frame size: 206mm FPV camera angle range: 0 - 70 degrees Motors supported: T-mount 2004, 1805, 1806 or similar (must have M2 screw on 12mm diameter bolt circle) Lipos supported: 3s, 4s, 5s, 6s  Lipos suggested: 850 - 1050mah 6s, or 650 - 1300mah 4s Lipo mounting position: Top  Prop size: 5.1 inch (max) T-mount suggested Accepted ESC: 4-in-1 micro design with 20mm x 20mm M3 or M2 mounting holes Accepted FC: micro 20mm x 20mm M3 or M2 mounting holes  Supports "Mini" FPV Cameras (caddx vista) Supports "Micro" FPV Cameras: (analog) Adapter needed  SPARE PARTS  ACCESSORIES BILL OF MATERIAL (PARTS LIST) FRAME BUILD VIDEO          

The Shocker 4”/5” Ultralight Long Range + Freestyle Frame

Code: CM01668


This frame fits the DJI 03 / Walksnail FPV air units.


Have you heard of the new spec of ultralight long range and freestyle HD rigs taking the FPV world by storm? We have designed our own offering which of course will blow your mind with it's superior design elements. Are you shocked? You will be soon. We are busy building this product page over the next couple days. Stay tuned for all the details to appear and pre-order to open. Below is the basic info: 

What is a HD long range ultralight? This is a new class of drone thought up by a guy in Europe that goes by the name of "Dave_C_FPV". It involves uses a crazy light weight freestyle type of frame design (60g max). You then stuff inside a Caddx vista, micro stack, 2004, 1805, 1806, or other light weight motors, 5" or 4" T mount props, and a 650mah to 850mah 4s or 1050mah 6s lipo. Some pilots use crossfire and GPS for LR flights. These builds are so light and efficient they can fly for very long durations (10 minutes, or even more depending on setup) allowing you to go on long range adventures in beautiful HD. How much will we charge for this frame? We are still figuring that out but it will be less than 1 million dollars. 

 

Features: 

  • Crazy light weight frame
  • Designed for cruising long range flights in beautiful HD
  • Very tough for it's weight
  • Easy access to components for field repairs
  • Quick swap arm design
  • Designed to fit the DJI 03 FPV, Walksnail FPV, analog FPV, Caddx / RunCam HD FPV and some of the Shark Byte HD FPV systems.
  • Lots of available accessories 
  • Optional colored Aluminum screw set available (save weight!) 
  • Lots of deck space for large lipos
  • 2 velcro straps hold the lipo firmly in place
  • Superior FPV camera protection 
  • Wide range of FPV camera adjustment 
  • Available in 4" and 5" prop versions 
  • Two screw arm removal. Remove arms be loosening one screw and removing the other
  • No arm "slop"
  • Industry leading camera protection (FPV)
  • Provisions for crossfire gear 
  • Mount options coming soon for GoPro 9, GoPro 8, GoPro 6/7, session, and insta 360 cams
  • Superior Catalyst Machineworks design
  • Superior Catalyst Machineworks customer support
  • Electronics sold separate 


Specs 

  • THIS FRAME INCLUDES BLACK ALUMINUM SCREWS AND STEEL ARM SCREWS. PURPLE SCREWS SHOWN IN THE PICS ARE NOT INCLUDED AS STANDARD. THEY ARE AVAILABLE AS AN OPTIONAL ACCESSORY
  • 5" Weight: 52g (optional aluminum arm screws), 55g (standard steel arm screws)
  • 4" Weight: 44.7g (optional aluminum arm screws), 48.5g (standard steel arm screws)
  • Carbon fiber: Twill Weave 3K Matte
  • Standoff color: Matte black
  • CF Arms: 4mm thick (5" version), 3mm thick (4" version)
  • Top CF plate: 2mm
  • Side CF cage plates: 1.5mm
  • Front brace: 2mm
  • Optional rear brace (sold separate): 2mm
  • Frame type: 'dead cat' quad
  • Frame size: 206mm
  • FPV camera angle range: 0 - 70 degrees
  • Motors supported: T-mount 2004, 1805, 1806 or similar (must have M2 screw on 12mm diameter bolt circle)
  • Lipos supported: 3s, 4s, 5s, 6s 
  • Lipos suggested: 850 - 1050mah 6s, or 650 - 1300mah 4s
  • Lipo mounting position: Top 
  • Prop size: 5.1 inch (max) T-mount suggested
  • Accepted ESC: 4-in-1 micro design with 20mm x 20mm M3 or M2 mounting holes
  • Accepted FC: micro 20mm x 20mm M3 or M2 mounting holes 
  • Supports "Mini" FPV Cameras (caddx vista)
  • Supports "Micro" FPV Cameras: (analog) Adapter needed 

SPARE PARTS 

ACCESSORIES

BILL OF MATERIAL (PARTS LIST)

FRAME BUILD VIDEO

 

 

 

 

 


This frame fits the DJI 03 / Walksnail FPV air units.


Have you heard of the new spec of ultralight long range and freestyle HD rigs taking the FPV world by storm? We have designed our own offering which of course will blow your mind with it's superior design elements. Are you shocked? You will be soon. We are busy building this product page over the next couple days. Stay tuned for all the details to appear and pre-order to open. Below is the basic info: 

What is a HD long range ultralight? This is a new class of drone thought up by a guy in Europe that goes by the name of "Dave_C_FPV". It involves uses a crazy light weight freestyle type of frame design (60g max). You then stuff inside a Caddx vista, micro stack, 2004, 1805, 1806, or other light weight motors, 5" or 4" T mount props, and a 650mah to 850mah 4s or 1050mah 6s lipo. Some pilots use crossfire and GPS for LR flights. These builds are so light and efficient they can fly for very long durations (10 minutes, or even more depending on setup) allowing you to go on long range adventures in beautiful HD. How much will we charge for this frame? We are still figuring that out but it will be less than 1 million dollars. 

 

Features: 

  • Crazy light weight frame
  • Designed for cruising long range flights in beautiful HD
  • Very tough for it's weight
  • Easy access to components for field repairs
  • Quick swap arm design
  • Designed to fit the DJI 03 FPV, Walksnail FPV, analog FPV, Caddx / RunCam HD FPV and some of the Shark Byte HD FPV systems.
  • Lots of available accessories 
  • Optional colored Aluminum screw set available (save weight!) 
  • Lots of deck space for large lipos
  • 2 velcro straps hold the lipo firmly in place
  • Superior FPV camera protection 
  • Wide range of FPV camera adjustment 
  • Available in 4" and 5" prop versions 
  • Two screw arm removal. Remove arms be loosening one screw and removing the other
  • No arm "slop"
  • Industry leading camera protection (FPV)
  • Provisions for crossfire gear 
  • Mount options coming soon for GoPro 9, GoPro 8, GoPro 6/7, session, and insta 360 cams
  • Superior Catalyst Machineworks design
  • Superior Catalyst Machineworks customer support
  • Electronics sold separate 


Specs 

  • THIS FRAME INCLUDES BLACK ALUMINUM SCREWS AND STEEL ARM SCREWS. PURPLE SCREWS SHOWN IN THE PICS ARE NOT INCLUDED AS STANDARD. THEY ARE AVAILABLE AS AN OPTIONAL ACCESSORY
  • 5" Weight: 52g (optional aluminum arm screws), 55g (standard steel arm screws)
  • 4" Weight: 44.7g (optional aluminum arm screws), 48.5g (standard steel arm screws)
  • Carbon fiber: Twill Weave 3K Matte
  • Standoff color: Matte black
  • CF Arms: 4mm thick (5" version), 3mm thick (4" version)
  • Top CF plate: 2mm
  • Side CF cage plates: 1.5mm
  • Front brace: 2mm
  • Optional rear brace (sold separate): 2mm
  • Frame type: 'dead cat' quad
  • Frame size: 206mm
  • FPV camera angle range: 0 - 70 degrees
  • Motors supported: T-mount 2004, 1805, 1806 or similar (must have M2 screw on 12mm diameter bolt circle)
  • Lipos supported: 3s, 4s, 5s, 6s 
  • Lipos suggested: 850 - 1050mah 6s, or 650 - 1300mah 4s
  • Lipo mounting position: Top 
  • Prop size: 5.1 inch (max) T-mount suggested
  • Accepted ESC: 4-in-1 micro design with 20mm x 20mm M3 or M2 mounting holes
  • Accepted FC: micro 20mm x 20mm M3 or M2 mounting holes 
  • Supports "Mini" FPV Cameras (caddx vista)
  • Supports "Micro" FPV Cameras: (analog) Adapter needed 

SPARE PARTS 

ACCESSORIES

BILL OF MATERIAL (PARTS LIST)

FRAME BUILD VIDEO