X-Class Thin xLED - (Addressable) X-Class Thin xLED - (Addressable) Catalyst Machineworks NOTE: This product is DIRECTIONAL. You must wire it with correct input side. The Small component on the end of board is the "INPUT" side. Make sure this is wired into from the Flight Controller.    X-Class Thin LED LED QTY: 13x 5050 WS2812b LEDs Addressable*** Dimensions: 8x98x2.65mm Weight: 2.6 Grams Current Draw: 700ma on full white. ***NOTE: LEDs are wired up in parallel. this will act as "1 LED" in Flight controller software. All lights will operate the same. This has a benefit. 1 led can be knocked off or break and will not affect any other lights. NO Christmas tree light effect here.  These will require larger 5v Regulators. Please be aware of the higher 5v amp draw.  There is a Data Out pad on each end. This will allow you to add a second board to operate as a second led. This second led with operate as as second LED in the flight controller software.

X-Class Thin xLED - (Addressable)

Code: CM01305

NOTE: This product is DIRECTIONAL. You must wire it with correct input side. The Small component on the end of board is the "INPUT" side. Make sure this is wired into from the Flight Controller. 

 

X-Class Thin LED

LED QTY: 13x 5050 WS2812b LEDs Addressable***

Dimensions: 8x98x2.65mm

Weight: 2.6 Grams

Current Draw: 700ma on full white.

***NOTE: LEDs are wired up in parallel. this will act as "1 LED" in Flight controller software. All lights will operate the same. This has a benefit. 1 led can be knocked off or break and will not affect any other lights. NO Christmas tree light effect here. 

These will require larger 5v Regulators. Please be aware of the higher 5v amp draw. 

There is a Data Out pad on each end. This will allow you to add a second board to operate as a second led. This second led with operate as as second LED in the flight controller software.

NOTE: This product is DIRECTIONAL. You must wire it with correct input side. The Small component on the end of board is the "INPUT" side. Make sure this is wired into from the Flight Controller. 

 

X-Class Thin LED

LED QTY: 13x 5050 WS2812b LEDs Addressable***

Dimensions: 8x98x2.65mm

Weight: 2.6 Grams

Current Draw: 700ma on full white.

***NOTE: LEDs are wired up in parallel. this will act as "1 LED" in Flight controller software. All lights will operate the same. This has a benefit. 1 led can be knocked off or break and will not affect any other lights. NO Christmas tree light effect here. 

These will require larger 5v Regulators. Please be aware of the higher 5v amp draw. 

There is a Data Out pad on each end. This will allow you to add a second board to operate as a second led. This second led with operate as as second LED in the flight controller software.