Nurk FPV Special Edition Merica 9” BNF (BUILD TO ORDER) Nurk FPV Special Edition Merica 9” BNF (BUILD TO ORDER) Catalyst Machineworks EMAIL INFO@CATALYSTMACHINEWORKS.COM FOR LEAD TIME.  SAFETY AGREEMENT DETAILS THIS CRAFT IS SETUP FOR REVERSE PROP ROTATION! MAKE SURE TO PUT YOUR PROPS ON CORRECTLY!  Looking for something ALOT different? Look no further! This is the same spec as seen in Mr. Nurk's Video above. We teamed up with the 2018 winner of the DRL and freestyle madman to determine what his ideal setup would look like in a giant macro racing / freestyle quad. Below is the entire spec list, part by part. We are running this BNF on a "build to order" basis currently. Email for current lead time. If you see something you'd like to change about this spec just let us know and we can send out a custom invoice. Email info@catalystmachineworks.com. Please be aware the camera mount IS NOT INCLUDED and must be purchased separately.  Frame: Merica 9"Frame Upgrade: Canopy for GoPro carryTune Upgrade: Nurk's Custom Merica 9" tuneVelcro lipo straps: 1 included Motor: Brother Hobby Avenger 2816-1050kv MotorElectronic Speed Controller: Tmotor Pacer 60AMP 6S 4in1 ESCFlight Controller: T-Motor F7 HD 30x30 Flight Controller for DJI or Matek 722-HD (fully setup/tuned to perfection with current Betaflight FW) FPV Camera: Caddx Air Unit or Caddx Polar Air Unit (based on availability) FPV Video Transmitter:  Caddx Air Unit or Caddx Polar Air Unit  (based on availability)   FPV Antenna:  Caddx Air Unit or Caddx Polar Air Unit  (based on availability)   Radio Receiver: TBS Crossfire Nano Rx (Special Edition) or TBS Tracer + Tracer antennaProps: HQProp MacroQuad 9x5x3 Propeller (CCW and CW)Labor / Setup Charge: Click Here (included with purchase) Radio: Not included! Only compatible with the crossfire capable radioLipo: Not included! We suggest a 6s 3300mah to 5100mah high C rated HD GoPro Camera Mount: Not included (SOLD HERE)               

Nurk FPV Special Edition Merica 9” BNF (BUILD TO ORDER)

Code: CM01926
$899.00
In Stock
Add to Wishlist Add to Compare

EMAIL INFO@CATALYSTMACHINEWORKS.COM FOR LEAD TIME. 


SAFETY AGREEMENT DETAILS

THIS CRAFT IS SETUP FOR REVERSE PROP ROTATION! MAKE SURE TO PUT YOUR PROPS ON CORRECTLY! 

Looking for something ALOT different? Look no further! This is the same spec as seen in Mr. Nurk's Video above. We teamed up with the 2018 winner of the DRL and freestyle madman to determine what his ideal setup would look like in a giant macro racing / freestyle quad. Below is the entire spec list, part by part. We are running this BNF on a "build to order" basis currently. Email for current lead time. If you see something you'd like to change about this spec just let us know and we can send out a custom invoice. Email info@catalystmachineworks.com. Please be aware the camera mount IS NOT INCLUDED and must be purchased separately. 

Frame: Merica 9"
Frame Upgrade: Canopy for GoPro carry
Tune Upgrade: Nurk's Custom Merica 9" tune
Velcro lipo straps: 1 included 
Motor: Brother Hobby Avenger 2816-1050kv Motor
Electronic Speed Controller: Tmotor Pacer 60AMP 6S 4in1 ESC
Flight Controller: T-Motor F7 HD 30x30 Flight Controller for DJI or Matek 722-HD (fully setup/tuned to perfection with current Betaflight FW) 
FPV Camera: Caddx Air Unit or Caddx Polar Air Unit (based on availability) 
FPV Video Transmitter:  Caddx Air Unit or Caddx Polar Air Unit  (based on availability)   
FPV Antenna:  Caddx Air Unit or Caddx Polar Air Unit  (based on availability)   
Radio Receiver: TBS Crossfire Nano Rx (Special Edition) or TBS Tracer + Tracer antenna
Props: HQProp MacroQuad 9x5x3 Propeller (CCW and CW)
Labor / Setup Charge: Click Here (included with purchase) 
Radio: Not included! Only compatible with the crossfire capable radio
Lipo: Not included! We suggest a 6s 3300mah to 5100mah high C rated 
HD GoPro Camera Mount: Not included (SOLD HERE) 

 

 

 

 

 

 

 

EMAIL INFO@CATALYSTMACHINEWORKS.COM FOR LEAD TIME. 


SAFETY AGREEMENT DETAILS

THIS CRAFT IS SETUP FOR REVERSE PROP ROTATION! MAKE SURE TO PUT YOUR PROPS ON CORRECTLY! 

Looking for something ALOT different? Look no further! This is the same spec as seen in Mr. Nurk's Video above. We teamed up with the 2018 winner of the DRL and freestyle madman to determine what his ideal setup would look like in a giant macro racing / freestyle quad. Below is the entire spec list, part by part. We are running this BNF on a "build to order" basis currently. Email for current lead time. If you see something you'd like to change about this spec just let us know and we can send out a custom invoice. Email info@catalystmachineworks.com. Please be aware the camera mount IS NOT INCLUDED and must be purchased separately. 

Frame: Merica 9"
Frame Upgrade: Canopy for GoPro carry
Tune Upgrade: Nurk's Custom Merica 9" tune
Velcro lipo straps: 1 included 
Motor: Brother Hobby Avenger 2816-1050kv Motor
Electronic Speed Controller: Tmotor Pacer 60AMP 6S 4in1 ESC
Flight Controller: T-Motor F7 HD 30x30 Flight Controller for DJI or Matek 722-HD (fully setup/tuned to perfection with current Betaflight FW) 
FPV Camera: Caddx Air Unit or Caddx Polar Air Unit (based on availability) 
FPV Video Transmitter:  Caddx Air Unit or Caddx Polar Air Unit  (based on availability)   
FPV Antenna:  Caddx Air Unit or Caddx Polar Air Unit  (based on availability)   
Radio Receiver: TBS Crossfire Nano Rx (Special Edition) or TBS Tracer + Tracer antenna
Props: HQProp MacroQuad 9x5x3 Propeller (CCW and CW)
Labor / Setup Charge: Click Here (included with purchase) 
Radio: Not included! Only compatible with the crossfire capable radio
Lipo: Not included! We suggest a 6s 3300mah to 5100mah high C rated 
HD GoPro Camera Mount: Not included (SOLD HERE)