Macro Merica SMA Antenna Mount Upgrade Macro Merica SMA Antenna Mount Upgrade Catalyst Machineworks This accessory for your Macro Merica 8", 9" or 10" will allow you to use an SMA type of FPV antenna. It is comprised of two 3D printed parts that mount to the canopy and carbon frame as seen in the pics. Please note this setup WILL NOT WORK with the 8S build spec where you are using APD ESC mounts. This will however work with a 6s build spec where you are using AIO ESC or you mount the ESC's on the arms. This accessory is great for people who want to run the Macro Merica with an analog FPV system. It is also great for those using the Caddx / DJI FPV systems who want to upgrade the antenna. Finally, it makes it possible to use Fat Shark's "Shark Byte" system with this canopy.  Why use this?  Upgrade the Caddx Vista antenna from stock to an "SMA" type of antenna of your choosing. In order to make this happen you will need a U.FL to SMA adapter like THIS one that we offer which is the correct length to reach the VTX. We sell this adapter just for this purpose. 6" in cable length is suggested to be safe.  Run the Shark Byte HD FPV video system in the macro Merica. If you are using a Shark Byte VTX that uses an MMCX connector you can use this antenna mount along with THIS adapter. If you are using a Shark Byte VTX that uses a U.FL connector use THIS adapter instead. Cable length depends on build but keep in mind longer is always safer! Run an analog FPV system in your Macro Merica. Depending on the type of VTX you use you may need the U.FL or MMCX adapter. Cable length depends on build but keep in mind longer is always safer!  Includes:   1 x SMA Mount (Black 3D printed part in the pictures) 1 x Antenna Stress Relief Post (Black 3D printed part in the pictures) 2 x Self Tapping Screw #4 x 1/2" Long      *****SMA ADAPTER(S) ARE SOLD SEPARATE*****      
Catalyst Machineworks

Macro Merica SMA Antenna Mount Upgrade

Code: CM01942
Add Your Review
Macro Merica SMA Antenna Mount Upgrade Macro Merica SMA Antenna Mount Upgrade
Macro Merica SMA Antenna Mount Upgrade
Macro Merica SMA Antenna Mount Upgrade Macro Merica SMA Antenna Mount Upgrade
Add to Wishlist Add to Compare
Category: 3D Printed Parts, Accessories and Upgrades, Best Selling Products, Merica Canopy Choices, Newest Products, Products, Spare Parts

This accessory for your Macro Merica 8", 9" or 10" will allow you to use an SMA type of FPV antenna. It is comprised of two 3D printed parts that mount to the canopy and carbon frame as seen in the pics. Please note this setup WILL NOT WORK with the 8S build spec where you are using APD ESC mounts. This will however work with a 6s build spec where you are using AIO ESC or you mount the ESC's on the arms. This accessory is great for people who want to run the Macro Merica with an analog FPV system. It is also great for those using the Caddx / DJI FPV systems who want to upgrade the antenna. Finally, it makes it possible to use Fat Shark's "Shark Byte" system with this canopy. 

Why use this? 

  1. Upgrade the Caddx Vista antenna from stock to an "SMA" type of antenna of your choosing. In order to make this happen you will need a U.FL to SMA adapter like THIS one that we offer which is the correct length to reach the VTX. We sell this adapter just for this purpose. 6" in cable length is suggested to be safe. 
  2. Run the Shark Byte HD FPV video system in the macro Merica. If you are using a Shark Byte VTX that uses an MMCX connector you can use this antenna mount along with THIS adapter. If you are using a Shark Byte VTX that uses a U.FL connector use THIS adapter instead. Cable length depends on build but keep in mind longer is always safer!
  3. Run an analog FPV system in your Macro Merica. Depending on the type of VTX you use you may need the U.FL or MMCX adapter. Cable length depends on build but keep in mind longer is always safer! 

    Includes: 

     1 x SMA Mount (Black 3D printed part in the pictures)
     1 x Antenna Stress Relief Post (Black 3D printed part in the pictures)
     2 x Self Tapping Screw #4 x 1/2" Long 

        *****SMA ADAPTER(S) ARE SOLD SEPARATE*****


     

     

     

    This accessory for your Macro Merica 8", 9" or 10" will allow you to use an SMA type of FPV antenna. It is comprised of two 3D printed parts that mount to the canopy and carbon frame as seen in the pics. Please note this setup WILL NOT WORK with the 8S build spec where you are using APD ESC mounts. This will however work with a 6s build spec where you are using AIO ESC or you mount the ESC's on the arms. This accessory is great for people who want to run the Macro Merica with an analog FPV system. It is also great for those using the Caddx / DJI FPV systems who want to upgrade the antenna. Finally, it makes it possible to use Fat Shark's "Shark Byte" system with this canopy. 

    Why use this? 

    1. Upgrade the Caddx Vista antenna from stock to an "SMA" type of antenna of your choosing. In order to make this happen you will need a U.FL to SMA adapter like THIS one that we offer which is the correct length to reach the VTX. We sell this adapter just for this purpose. 6" in cable length is suggested to be safe. 
    2. Run the Shark Byte HD FPV video system in the macro Merica. If you are using a Shark Byte VTX that uses an MMCX connector you can use this antenna mount along with THIS adapter. If you are using a Shark Byte VTX that uses a U.FL connector use THIS adapter instead. Cable length depends on build but keep in mind longer is always safer!
    3. Run an analog FPV system in your Macro Merica. Depending on the type of VTX you use you may need the U.FL or MMCX adapter. Cable length depends on build but keep in mind longer is always safer! 

      Includes: 

       1 x SMA Mount (Black 3D printed part in the pictures)
       1 x Antenna Stress Relief Post (Black 3D printed part in the pictures)
       2 x Self Tapping Screw #4 x 1/2" Long 

          *****SMA ADAPTER(S) ARE SOLD SEPARATE*****