Macro Merica 'SMA Style' Canopy - Fits 03 Air Unit + GoPro w/protection Macro Merica 'SMA Style' Canopy - Fits 03 Air Unit + GoPro w/protection Catalyst Machineworks Looking for the best 03 Air Unit experience on the market? Look no further. This canopy fits our Merica 7" - 10" frame and perfectly houses the 03 Air Unit from DJI. With this canopy you ditch the crap stock antenna and instead replace it with a couple long range SMA style FPV antennas. The antennas are held firmly in place and stress relieved by a couple zip ties that run around each antenna and through the thick walls of the canopy. To facilitate antenna mounting you will need SMA to u.fl adapters that can be located HERE. The u.fl portion of the adapters will mount straight into the AU. The air unit itself mounts to the plastic adapter plate via double sided tape which then joins to the underside of the canopy using included self tapping screws. You have full access to the SD card slot and USB-C on the side of the AU. Enjoy full range of camera angle adjustment from 30 to 60 degrees. The soft TPU canopy serves as an effective shield from resonance issues reaching the IMU inside the 03 FPV camera.  Features:  Sleek and sexy look Accepts two SMA type antennas Nearly indestructible Light weight yet strong AF Aerodynamic  Available in multiple colors  Fits ONLY the 03 Air Unit from DJI Full access to the SD card and USB-C Accepts a GoPro by way of mounting it inside the following protective mounts which are sold separately: GoPro 6/7 Mount, GoPro 8 Mount, GoPro 9/10 Mount, Session Mount Specs:  FPV antennas NOT INCLUDED u.fl to SMA adapters NOT INCLUDED Weight: 35g Fits both the 7" - 10" frames Camera min/max camera angle: 30 - 60 degree Fits a GoPro 6, 7, 8, 9, 10, and Session Includes:  1 x 3D printed canopy 4 x M2 Nylock Nut Steel 4 x M2 Washer 4 x M2 X 5mm Socket Screw 4 x M2 X 18mm Socket Screw  3 x M3 X 30mm Socket Screw  1 x M3 Nylock Nut Steel 1 x 30 Degree Angle Bar  1 x 35 Degree Angle Bar  1 x 40 Degree Angle Bar  1 x 45 Degree Angle Bar2 x Self Tapping Screw #2 x 7/16" long 2 x Self Tapping Screw #2 x 5/16" long 1 x 03 Air Unit Adapter Plate      

Macro Merica 'SMA Style' Canopy - Fits 03 Air Unit + GoPro w/protection

Code: CM02602
$39.99
In Stock
Add to Wishlist Add to Compare

Looking for the best 03 Air Unit experience on the market? Look no further. This canopy fits our Merica 7" - 10" frame and perfectly houses the 03 Air Unit from DJI. With this canopy you ditch the crap stock antenna and instead replace it with a couple long range SMA style FPV antennas. The antennas are held firmly in place and stress relieved by a couple zip ties that run around each antenna and through the thick walls of the canopy. To facilitate antenna mounting you will need SMA to u.fl adapters that can be located HERE. The u.fl portion of the adapters will mount straight into the AU. The air unit itself mounts to the plastic adapter plate via double sided tape which then joins to the underside of the canopy using included self tapping screws. You have full access to the SD card slot and USB-C on the side of the AU. Enjoy full range of camera angle adjustment from 30 to 60 degrees. The soft TPU canopy serves as an effective shield from resonance issues reaching the IMU inside the 03 FPV camera. 


Features: 

  • Sleek and sexy look
  • Accepts two SMA type antennas
  • Nearly indestructible
  • Light weight yet strong AF
  • Aerodynamic 
  • Available in multiple colors 
  • Fits ONLY the 03 Air Unit from DJI
  • Full access to the SD card and USB-C
  • Accepts a GoPro by way of mounting it inside the following protective mounts which are sold separately: GoPro 6/7 Mount, GoPro 8 Mount, GoPro 9/10 Mount, Session Mount

Specs: 

  • FPV antennas NOT INCLUDED
  • u.fl to SMA adapters NOT INCLUDED
  • Weight: 35g
  • Fits both the 7" - 10" frames
  • Camera min/max camera angle: 30 - 60 degree
  • Fits a GoPro 6, 7, 8, 9, 10, and Session

Includes: 

1 x 3D printed canopy
4 x M2 Nylock Nut Steel
4 x M2 Washer
4 x M2 X 5mm Socket Screw
4 x M2 X 18mm Socket Screw 
3 x M3 X 30mm Socket Screw 
1 x M3 Nylock Nut Steel 
1 x 30 Degree Angle Bar 
1 x 35 Degree Angle Bar 
1 x 40 Degree Angle Bar 
1 x 45 Degree Angle Bar
2 x Self Tapping Screw #2 x 7/16" long 
2 x Self Tapping Screw #2 x 5/16" long 
1 x 03 Air Unit Adapter Plate

 

 


 

Looking for the best 03 Air Unit experience on the market? Look no further. This canopy fits our Merica 7" - 10" frame and perfectly houses the 03 Air Unit from DJI. With this canopy you ditch the crap stock antenna and instead replace it with a couple long range SMA style FPV antennas. The antennas are held firmly in place and stress relieved by a couple zip ties that run around each antenna and through the thick walls of the canopy. To facilitate antenna mounting you will need SMA to u.fl adapters that can be located HERE. The u.fl portion of the adapters will mount straight into the AU. The air unit itself mounts to the plastic adapter plate via double sided tape which then joins to the underside of the canopy using included self tapping screws. You have full access to the SD card slot and USB-C on the side of the AU. Enjoy full range of camera angle adjustment from 30 to 60 degrees. The soft TPU canopy serves as an effective shield from resonance issues reaching the IMU inside the 03 FPV camera. 


Features: 

  • Sleek and sexy look
  • Accepts two SMA type antennas
  • Nearly indestructible
  • Light weight yet strong AF
  • Aerodynamic 
  • Available in multiple colors 
  • Fits ONLY the 03 Air Unit from DJI
  • Full access to the SD card and USB-C
  • Accepts a GoPro by way of mounting it inside the following protective mounts which are sold separately: GoPro 6/7 Mount, GoPro 8 Mount, GoPro 9/10 Mount, Session Mount

Specs: 

  • FPV antennas NOT INCLUDED
  • u.fl to SMA adapters NOT INCLUDED
  • Weight: 35g
  • Fits both the 7" - 10" frames
  • Camera min/max camera angle: 30 - 60 degree
  • Fits a GoPro 6, 7, 8, 9, 10, and Session

Includes: 

1 x 3D printed canopy
4 x M2 Nylock Nut Steel
4 x M2 Washer
4 x M2 X 5mm Socket Screw
4 x M2 X 18mm Socket Screw 
3 x M3 X 30mm Socket Screw 
1 x M3 Nylock Nut Steel 
1 x 30 Degree Angle Bar 
1 x 35 Degree Angle Bar 
1 x 40 Degree Angle Bar 
1 x 45 Degree Angle Bar
2 x Self Tapping Screw #2 x 7/16" long 
2 x Self Tapping Screw #2 x 5/16" long 
1 x 03 Air Unit Adapter Plate