ADVANCED POWER DRIVES F3[x] 8S 100A ESC (APD X Class ESC) ADVANCED POWER DRIVES F3[x] 8S 100A ESC (APD X Class ESC) Catalyst Machineworks UPDATE 10-21-19: These boards are due in stock Thursday 10-24-19 and shipping begins Friday 10-25-19 Please read the manual before installing.  APD-F_Series-Manual-Rev1.pdf You asked and APD listened. New in the V2 version! Heavy copper 8-Layer PCB to ensure minimal track resistance. Dual Cool FETS. Bigger solder tabs  Capacitor mounting tabs. The APD F-Series ESCs bring forward a ground-breaking new design utilising a Powerful 32bit F3 running brand-new firmware (APD Propriety) developed from the ground up. The F3 processor ensures no input commands are missed, even at the highest input update rates. Its bleeding-edge features include ‘PWM-frequency dithering, and Active Phase-current Demagnetisation to ensure the smoothest control at high power, whilst maintaining maximum efficiency. Compatible with the latest Protocols including ProShot up to 3MBs/S. The F3[x]-100 is designed to withstand the extreme demands of X-Class motor and prop combinations, where high inertia and fast spool-up/spool-down rates normally cause issues.   Feature set: Designed and manufactured in Australia using only the highest quality components, ensuring no sacrifice in reliability. Plug and play firmware 4S to 8S capable Up to 100Amps continuous current with airflow 150A Burst current - With active current Limiting True 10bit resolution Virtually no setup time, with simple motor reverse solder tab Auto-detect ProShot or Dshot any frequency range ProShot1000 to ProShot3000 capable (1-3Mbs/s) Dshot300 to Dshot2400 capabale (0.3-2.4Mbs/s) Up to 750,000 eRPM Auto PWM-freq Auto Timing Advance Telemetry output Intelligent current sensing Intelligent Regen (active-braking) control LED indication Digital commands over Proshot (including anti-turtle mode) Digital commands over Dshot 8-Layer PCB to ensure minimal track resistance Specifications: Size: 46x24x4mm Weight:  9.5g

ADVANCED POWER DRIVES F3[x] 8S 100A ESC (APD X Class ESC)

Code: CM01478

UPDATE 10-21-19: These boards are due in stock Thursday 10-24-19 and shipping begins Friday 10-25-19

Please read the manual before installing.  APD-F_Series-Manual-Rev1.pdf

You asked and APD listened. New in the V2 version!
  • Heavy copper 8-Layer PCB to ensure minimal track resistance.
  • Dual Cool FETS.
  • Bigger solder tabs 
  • Capacitor mounting tabs.
The APD F-Series ESCs bring forward a ground-breaking new design utilising a Powerful 32bit F3 running brand-new firmware (APD Propriety) developed from the ground up.
The F3 processor ensures no input commands are missed, even at the highest input update rates. Its bleeding-edge features include ‘PWM-frequency dithering, and Active Phase-current Demagnetisation to ensure the smoothest control at high power, whilst maintaining maximum efficiency.
Compatible with the latest Protocols including ProShot up to 3MBs/S.
The F3[x]-100 is designed to withstand the extreme demands of X-Class motor and prop combinations, where high inertia and fast spool-up/spool-down rates normally cause issues.

 

Feature set:

  • Designed and manufactured in Australia using only the highest quality components, ensuring no sacrifice in reliability.
  • Plug and play firmware
  • 4S to 8S capable
  • Up to 100Amps continuous current with airflow
  • 150A Burst current - With active current Limiting
  • True 10bit resolution
  • Virtually no setup time, with simple motor reverse solder tab
  • Auto-detect ProShot or Dshot any frequency range
  • ProShot1000 to ProShot3000 capable (1-3Mbs/s)
  • Dshot300 to Dshot2400 capabale (0.3-2.4Mbs/s)
  • Up to 750,000 eRPM
  • Auto PWM-freq
  • Auto Timing Advance
  • Telemetry output
  • Intelligent current sensing
  • Intelligent Regen (active-braking) control
  • LED indication
  • Digital commands over Proshot (including anti-turtle mode)
  • Digital commands over Dshot
  • 8-Layer PCB to ensure minimal track resistance

Specifications:

  • Size: 46x24x4mm
  • Weight:  9.5g

UPDATE 10-21-19: These boards are due in stock Thursday 10-24-19 and shipping begins Friday 10-25-19

Please read the manual before installing.  APD-F_Series-Manual-Rev1.pdf

You asked and APD listened. New in the V2 version!
  • Heavy copper 8-Layer PCB to ensure minimal track resistance.
  • Dual Cool FETS.
  • Bigger solder tabs 
  • Capacitor mounting tabs.
The APD F-Series ESCs bring forward a ground-breaking new design utilising a Powerful 32bit F3 running brand-new firmware (APD Propriety) developed from the ground up.
The F3 processor ensures no input commands are missed, even at the highest input update rates. Its bleeding-edge features include ‘PWM-frequency dithering, and Active Phase-current Demagnetisation to ensure the smoothest control at high power, whilst maintaining maximum efficiency.
Compatible with the latest Protocols including ProShot up to 3MBs/S.
The F3[x]-100 is designed to withstand the extreme demands of X-Class motor and prop combinations, where high inertia and fast spool-up/spool-down rates normally cause issues.

 

Feature set:

  • Designed and manufactured in Australia using only the highest quality components, ensuring no sacrifice in reliability.
  • Plug and play firmware
  • 4S to 8S capable
  • Up to 100Amps continuous current with airflow
  • 150A Burst current - With active current Limiting
  • True 10bit resolution
  • Virtually no setup time, with simple motor reverse solder tab
  • Auto-detect ProShot or Dshot any frequency range
  • ProShot1000 to ProShot3000 capable (1-3Mbs/s)
  • Dshot300 to Dshot2400 capabale (0.3-2.4Mbs/s)
  • Up to 750,000 eRPM
  • Auto PWM-freq
  • Auto Timing Advance
  • Telemetry output
  • Intelligent current sensing
  • Intelligent Regen (active-braking) control
  • LED indication
  • Digital commands over Proshot (including anti-turtle mode)
  • Digital commands over Dshot
  • 8-Layer PCB to ensure minimal track resistance

Specifications:

  • Size: 46x24x4mm
  • Weight:  9.5g