Caddx Vista HD Merica Canopy System (Pre-order) Caddx Vista HD Merica Canopy System (Pre-order) Catalyst Machineworks Update 6-2-20: We are currently selling these canopies on a 'print to order' basis. There will be some delay to ship. We have also added an option for a version of the canopy which will allow you to attach a GoPro hero 6, 7, or 8 mount. Or a session mount. The mount is sold separate and a list of the mounts that fit the canopy is listed below in the "features" section.  Looking for the best racing canopy/frame for the Caddx Vista on earth? Well here it is. We call this a "system" because it comes with more than just a 3D printed TPU canopy. This is a full set of parts to allow you to fit the HD Vista into your Merica 4" - 6" and use a 'standard sized' flight controller board. Both the Vista stack and the FC board are housed in the same canopy. The canopy will allow the camera lens to be adjusted from an angle range of 20 - 70 degrees within seconds. This canopy has a beefy shroud designed to protect the lens from damage. The Vista USB C port is accessible. The part itself is made from a highly crash resilient 3D printed TPU material. Available colors are black, red, gray, blue, purple, yellow, orange, pink, green, white, and clear. Last but not least...there are NO PROPS IN THE HD FOOTAGE.  Features:  Excellent camera and lens protection  Integrated flip stick for ease of turtle mode (not included with gopro mount version) Integrated FPV antenna mount NO PROPS IN THE HD FOOTAGE (above 25 degree camera tilt) Sleek and sexy look Crash tough Light weight  Aerodynamic  Available in multiple colors  Same pod fits Merica 4" through Merica 6" Wide range of lens angle adjustment  Easy access USB port Fits "standard" 30.5mm x 30.5mm FC's  MERICA FRAME IS SOLD SEPARATE! We now offer a version of the canopy which holds an HD camera mount HD camera mount version fits the following mounts: GoPro 8, GoPro 6/7, Session, Session w/ ND   Specs:  This canopy only, frame sold separate Weight: 23g (+/- 1g) Material: 3D Printed TPU Camera angle range: 20 - 70 degrees Camera Requirement: Caddx Vista Flight Controller Requirement: 30.5mm x 30.5mm mounting  Non-gopro version Includes:  1 x 3D printed TPU canopy 1 x Vista / Flight controller mounting hardware set 1 x Flip Stick  Gopro version Includes:  1 x 3D printed TPU canopy 1 x Vista / Flight controller mounting hardware set 1 x M3 X 30mm screw 1 x M3 X 27mm screw 1 x 45 degree angle bar (other angles available here and sold separate)                           

Caddx Vista HD Merica Canopy System (Pre-order)

Code: CM01627
$20.99
In Stock
Add to Wishlist Add to Compare

Update 6-2-20: We are currently selling these canopies on a 'print to order' basis. There will be some delay to ship. We have also added an option for a version of the canopy which will allow you to attach a GoPro hero 6, 7, or 8 mount. Or a session mount. The mount is sold separate and a list of the mounts that fit the canopy is listed below in the "features" section. 

Looking for the best racing canopy/frame for the Caddx Vista on earth? Well here it is. We call this a "system" because it comes with more than just a 3D printed TPU canopy. This is a full set of parts to allow you to fit the HD Vista into your Merica 4" - 6" and use a 'standard sized' flight controller board. Both the Vista stack and the FC board are housed in the same canopy. The canopy will allow the camera lens to be adjusted from an angle range of 20 - 70 degrees within seconds. This canopy has a beefy shroud designed to protect the lens from damage. The Vista USB C port is accessible. The part itself is made from a highly crash resilient 3D printed TPU material. Available colors are black, red, gray, blue, purple, yellow, orange, pink, green, white, and clear. Last but not least...there are NO PROPS IN THE HD FOOTAGE. 

Features: 

  • Excellent camera and lens protection 
  • Integrated flip stick for ease of turtle mode (not included with gopro mount version)
  • Integrated FPV antenna mount
  • NO PROPS IN THE HD FOOTAGE (above 25 degree camera tilt)
  • Sleek and sexy look
  • Crash tough
  • Light weight 
  • Aerodynamic 
  • Available in multiple colors 
  • Same pod fits Merica 4" through Merica 6"
  • Wide range of lens angle adjustment 
  • Easy access USB port
  • Fits "standard" 30.5mm x 30.5mm FC's 
  • MERICA FRAME IS SOLD SEPARATE!
  • We now offer a version of the canopy which holds an HD camera mount
  • HD camera mount version fits the following mounts: GoPro 8, GoPro 6/7, Session, Session w/ ND

 

Specs: 

  • This canopy only, frame sold separate
  • Weight: 23g (+/- 1g)
  • Material: 3D Printed TPU
  • Camera angle range: 20 - 70 degrees
  • Camera Requirement: Caddx Vista
  • Flight Controller Requirement: 30.5mm x 30.5mm mounting 

Non-gopro version Includes: 

1 x 3D printed TPU canopy

1 x Vista / Flight controller mounting hardware set

1 x Flip Stick 

Gopro version Includes: 

1 x 3D printed TPU canopy

1 x Vista / Flight controller mounting hardware set

1 x M3 X 30mm screw

1 x M3 X 27mm screw

1 x 45 degree angle bar (other angles available here and sold separate) 

 

 

 

 

 

 

 

 

 

 

 

 

 

Update 6-2-20: We are currently selling these canopies on a 'print to order' basis. There will be some delay to ship. We have also added an option for a version of the canopy which will allow you to attach a GoPro hero 6, 7, or 8 mount. Or a session mount. The mount is sold separate and a list of the mounts that fit the canopy is listed below in the "features" section. 

Looking for the best racing canopy/frame for the Caddx Vista on earth? Well here it is. We call this a "system" because it comes with more than just a 3D printed TPU canopy. This is a full set of parts to allow you to fit the HD Vista into your Merica 4" - 6" and use a 'standard sized' flight controller board. Both the Vista stack and the FC board are housed in the same canopy. The canopy will allow the camera lens to be adjusted from an angle range of 20 - 70 degrees within seconds. This canopy has a beefy shroud designed to protect the lens from damage. The Vista USB C port is accessible. The part itself is made from a highly crash resilient 3D printed TPU material. Available colors are black, red, gray, blue, purple, yellow, orange, pink, green, white, and clear. Last but not least...there are NO PROPS IN THE HD FOOTAGE. 

Features: 

  • Excellent camera and lens protection 
  • Integrated flip stick for ease of turtle mode (not included with gopro mount version)
  • Integrated FPV antenna mount
  • NO PROPS IN THE HD FOOTAGE (above 25 degree camera tilt)
  • Sleek and sexy look
  • Crash tough
  • Light weight 
  • Aerodynamic 
  • Available in multiple colors 
  • Same pod fits Merica 4" through Merica 6"
  • Wide range of lens angle adjustment 
  • Easy access USB port
  • Fits "standard" 30.5mm x 30.5mm FC's 
  • MERICA FRAME IS SOLD SEPARATE!
  • We now offer a version of the canopy which holds an HD camera mount
  • HD camera mount version fits the following mounts: GoPro 8, GoPro 6/7, Session, Session w/ ND

 

Specs: 

  • This canopy only, frame sold separate
  • Weight: 23g (+/- 1g)
  • Material: 3D Printed TPU
  • Camera angle range: 20 - 70 degrees
  • Camera Requirement: Caddx Vista
  • Flight Controller Requirement: 30.5mm x 30.5mm mounting 

Non-gopro version Includes: 

1 x 3D printed TPU canopy

1 x Vista / Flight controller mounting hardware set

1 x Flip Stick 

Gopro version Includes: 

1 x 3D printed TPU canopy

1 x Vista / Flight controller mounting hardware set

1 x M3 X 30mm screw

1 x M3 X 27mm screw

1 x 45 degree angle bar (other angles available here and sold separate)