Cannonball Partial BNF (Xclass / Beast Class) Cannonball Partial BNF (Xclass / Beast Class) Catalyst Machineworks SAFETY AGREEMENT DETAILS Building an Xclass or Beast Class rig is quite a bit different than a miniquad. You better be a highly skilled builder with plenty of experience and free time. A typical build can take anywhere from 8 - 12 hours, depending on your skill and experience level. Let us take the bulk of that workload away from you and get the 'hard part' out of the way. The center hub on the Cannonball comprises 80% of the labor involved with the entire build and is the most difficult portion to execute correctly. We are now offering our build service to you on a build to order basis. After you order (assuming all parts are in stock) we will crank out a perfect Cannonball center hub. All you need to do is mount your motors of choice to the arms, install the arms into the center hub, solder the motors wires to the ESC's, setup software from our suggested betaflight dump, and go fly. Our labor charge for this service is $350. This charge covers the many hours it takes our professional builder to create your masterpiece. Please be aware there are a list of components detailed below this center hub will come with as standard. There are also some components you need to select yourself. To order please follow the procedure below, exactly! Lead time to complete your build can be estimated by contacting us at info@catalystmachineworks.com.  Select the Cannonball frame configuration you prefer  Select the APD ESC mount color you prefer  Pick your FPV camera  Pick your FPV antenna  Select optional accessories Specs and Considerations:  Wired for 12s lipos using AS150 plugs. To see what size lipos fit the frame hit this link  Runs on only Betaflight  Runs on crossfire only We suggest against using Mad Components polar motors with this setup We suggest to only run this setup using our specific pre-installed Betaflight FW  Components Included As Standard: Complete Cannonball frame  APD 12s ESC x 4  APD 500 PDB Crossfire Nano Receiver  Immortal T antenna and mount Radix Flight Controller Unify V3 5V (25-800mW) FPV camera (select choice) FPV antenna (select choice) 12 AWG wiring 10 AWG wiring AS150 lipo pigtail connectors pre-soldered  Betaflight FW pre-installed on the FC Optional Components:  HD camera mount (if purchased separately we will install it!)  Cannonball USA wrap + extra labor fee (if purchased separately we will install it!) PLEASE BE AWARE THIS PURCHASE WILL INCLUDE ARMS, ARM BRACES (if purchased), AND MOTOR PADS. STOCK LEVELS FOR ALL PARTS MAY VARY. TO DETERMINE IF WE HAVE EVERYTHING NEEDED TO COMPLETE YOUR BUILD EMAIL US PRIOR TO ORDERING AT INFO@CATALYSTMACHINEWORKS.COM. YOU MUST SIGN A RELEASE OF LIABILITY WAIVER PRIOR TO US ACCEPTING YOUR ORDER.           

Cannonball Partial BNF (Xclass / Beast Class)

Code: N/A
$1,435.00
In Stock
Add to Wishlist Add to Compare

SAFETY AGREEMENT DETAILS

Building an Xclass or Beast Class rig is quite a bit different than a miniquad. You better be a highly skilled builder with plenty of experience and free time. A typical build can take anywhere from 8 - 12 hours, depending on your skill and experience level. Let us take the bulk of that workload away from you and get the 'hard part' out of the way. The center hub on the Cannonball comprises 80% of the labor involved with the entire build and is the most difficult portion to execute correctly. We are now offering our build service to you on a build to order basis. After you order (assuming all parts are in stock) we will crank out a perfect Cannonball center hub. All you need to do is mount your motors of choice to the arms, install the arms into the center hub, solder the motors wires to the ESC's, setup software from our suggested betaflight dump, and go fly.

Our labor charge for this service is $350. This charge covers the many hours it takes our professional builder to create your masterpiece. Please be aware there are a list of components detailed below this center hub will come with as standard. There are also some components you need to select yourself. To order please follow the procedure below, exactly! Lead time to complete your build can be estimated by contacting us at info@catalystmachineworks.com

  1. Select the Cannonball frame configuration you prefer 
  2. Select the APD ESC mount color you prefer 
  3. Pick your FPV camera 
  4. Pick your FPV antenna 
  5. Select optional accessories

Specs and Considerations: 

  • Wired for 12s lipos using AS150 plugs.
  • To see what size lipos fit the frame hit this link 
  • Runs on only Betaflight 
  • Runs on crossfire only
  • We suggest against using Mad Components polar motors with this setup
  • We suggest to only run this setup using our specific pre-installed Betaflight FW 

Components Included As Standard:

  • Complete Cannonball frame 
  • APD 12s ESC x 4 
  • APD 500 PDB
  • Crossfire Nano Receiver 
  • Immortal T antenna and mount
  • Radix Flight Controller
  • Unify V3 5V (25-800mW)
  • FPV camera (select choice)
  • FPV antenna (select choice)
  • 12 AWG wiring
  • 10 AWG wiring
  • AS150 lipo pigtail connectors pre-soldered 
  • Betaflight FW pre-installed on the FC

Optional Components: 

PLEASE BE AWARE THIS PURCHASE WILL INCLUDE ARMS, ARM BRACES (if purchased), AND MOTOR PADS. STOCK LEVELS FOR ALL PARTS MAY VARY. TO DETERMINE IF WE HAVE EVERYTHING NEEDED TO COMPLETE YOUR BUILD EMAIL US PRIOR TO ORDERING AT INFO@CATALYSTMACHINEWORKS.COM. YOU MUST SIGN A RELEASE OF LIABILITY WAIVER PRIOR TO US ACCEPTING YOUR ORDER. 

 

 

 

 

 

SAFETY AGREEMENT DETAILS

Building an Xclass or Beast Class rig is quite a bit different than a miniquad. You better be a highly skilled builder with plenty of experience and free time. A typical build can take anywhere from 8 - 12 hours, depending on your skill and experience level. Let us take the bulk of that workload away from you and get the 'hard part' out of the way. The center hub on the Cannonball comprises 80% of the labor involved with the entire build and is the most difficult portion to execute correctly. We are now offering our build service to you on a build to order basis. After you order (assuming all parts are in stock) we will crank out a perfect Cannonball center hub. All you need to do is mount your motors of choice to the arms, install the arms into the center hub, solder the motors wires to the ESC's, setup software from our suggested betaflight dump, and go fly.

Our labor charge for this service is $350. This charge covers the many hours it takes our professional builder to create your masterpiece. Please be aware there are a list of components detailed below this center hub will come with as standard. There are also some components you need to select yourself. To order please follow the procedure below, exactly! Lead time to complete your build can be estimated by contacting us at info@catalystmachineworks.com

  1. Select the Cannonball frame configuration you prefer 
  2. Select the APD ESC mount color you prefer 
  3. Pick your FPV camera 
  4. Pick your FPV antenna 
  5. Select optional accessories

Specs and Considerations: 

  • Wired for 12s lipos using AS150 plugs.
  • To see what size lipos fit the frame hit this link 
  • Runs on only Betaflight 
  • Runs on crossfire only
  • We suggest against using Mad Components polar motors with this setup
  • We suggest to only run this setup using our specific pre-installed Betaflight FW 

Components Included As Standard:

  • Complete Cannonball frame 
  • APD 12s ESC x 4 
  • APD 500 PDB
  • Crossfire Nano Receiver 
  • Immortal T antenna and mount
  • Radix Flight Controller
  • Unify V3 5V (25-800mW)
  • FPV camera (select choice)
  • FPV antenna (select choice)
  • 12 AWG wiring
  • 10 AWG wiring
  • AS150 lipo pigtail connectors pre-soldered 
  • Betaflight FW pre-installed on the FC

Optional Components: 

PLEASE BE AWARE THIS PURCHASE WILL INCLUDE ARMS, ARM BRACES (if purchased), AND MOTOR PADS. STOCK LEVELS FOR ALL PARTS MAY VARY. TO DETERMINE IF WE HAVE EVERYTHING NEEDED TO COMPLETE YOUR BUILD EMAIL US PRIOR TO ORDERING AT INFO@CATALYSTMACHINEWORKS.COM. YOU MUST SIGN A RELEASE OF LIABILITY WAIVER PRIOR TO US ACCEPTING YOUR ORDER.