EMAX - EZ Pilot PRO RTF EMAX - EZ Pilot PRO RTF Catalyst Machineworks “REMOVE PROPS BEFORE CONNECTING TO BETAFLIGHT/INAV, BENCH TESTING, OR SETUP”   GREAT FOR BEGINNERS EZ Pilot Pro is an entry-level Ready To Fly (RTF) kit that provides new customers with everything they would need to get started and have a great experience but without too many other frills and features. EZ Pilot Pro is an addition to the previous EZ Pilot product line however the "Pro" designation indicates that this model is capable of acro mode and Betaflight programming similar to Tinyhawk that EZ Pilot previously lacked. While "Pro" isn't the first word to come to mind with a beginner product, it allows the pilot to learn all the skills necessary at a lower cost so they are then able to upgrade and fly professionally whether that be racing or commercial filming with the skills they learned on EZ Pilot Pro RTF. COST-EFFECTIVE FEATURES The drone in this kit is a redesigned original Tinyhawk that's been optimized for maximum durability for new pilots and adds an adjustable camera angle. The RTF kit includes our newly introduced E8 transmitter and Transporter 2 goggles from the Tinyhawk 3 RTF however the goggles included with the EZ Pilot Pro do not include a built-in DVR like the TH3 RTF as this is part of the cost savings and feature set dedicated to the higher-end kit. Specifications EMAX PILOT PRO FPV DRONE VTX: 200-100-25mW 37CH Switchable w/ SmartAudio support Propeller: AVAN TH Turtlemode 4-Bladed Prop FC: Matek F411 (STM32F411 firmware) EMAX Tiny Receiver (SPI / Frsky_D8) Motor: 08025 15000Kv Motor Weight: 34g without battery Battery: 1S HV 450mAh Camera: 1200TVL E01 Size: 114x98x40mm Wheelbase: 75m ESC: 4-in-1 / 6A Brand: Emax EMAX E8 RADIO TRANSMITTER Charging System: Built-in USB 5V--1A linear lithium-ion battery charging system External interface: Micro USB,3.5mm Audio interface (wired coach interface) Frequency 2.4GHz (2400MHz-2483.5MHz) Maximum Size: L*W*H=150x140x45mm Battery: 18650 Lithium-ion battery Weight (Without Battery): 260g Number Of Channels: 8CH Working Voltage: 4.2V-3.3V Output: 22dbm EMAX TRANSPORTER 2 GOGGLES Charging System: Built-in USB 5V--1A linear lithium-ion battery charging system Maximum Size: (Without antenna - Folded) 155x100x90mm Frequency: 5.8GHz(5658MHz-5945MHz) Video: VGA/D1/HD (Off/3min/5min/10min) DVR: 32G TF card (max), MJPEG, AVI Battery: 1300mAh Lithium-ion battery Screen resolution: 480X800 Weight (With battery): 398g Working Voltage: 4.2V-3.7V Screen size: 4.3 inch Includes 1x Emax EZ Pilot Pro Beginner FPV Drone 1x Emax Transporter 2 Goggles (w/o DVR) 1x Turtle Mode Propeller Set (2CW/2CCW) 1x Emax 1s HV 450mAh Lipo Battery 1x Monitor Mounting Hardware Set 1x Emax E8 Transmitter  1x Bracket Accessories 1x Instruction Manual 1x Hardware Set 1x Screwdriver 1x USB Cable 2x Antenna*** EXTRAS ***1x - BetaFPV 6 Ports 1S charger - BT2.02x - Tinyhawk III Spare Parts - 15000kv motors3x - RDQ450 450mAh 1s 3.8v 80c PH2.0 batteries3x - AVAN Turtlemode props (3 sets of props - 4 per bag)

EMAX - EZ Pilot PRO RTF

Code: CM02466
Sale

“REMOVE PROPS BEFORE CONNECTING TO BETAFLIGHT/INAV, BENCH TESTING, OR SETUP”





 

GREAT FOR BEGINNERS

EZ Pilot Pro is an entry-level Ready To Fly (RTF) kit that provides new customers with everything they would need to get started and have a great experience but without too many other frills and features. EZ Pilot Pro is an addition to the previous EZ Pilot product line however the "Pro" designation indicates that this model is capable of acro mode and Betaflight programming similar to Tinyhawk that EZ Pilot previously lacked. While "Pro" isn't the first word to come to mind with a beginner product, it allows the pilot to learn all the skills necessary at a lower cost so they are then able to upgrade and fly professionally whether that be racing or commercial filming with the skills they learned on EZ Pilot Pro RTF.

COST-EFFECTIVE FEATURES

The drone in this kit is a redesigned original Tinyhawk that's been optimized for maximum durability for new pilots and adds an adjustable camera angle. The RTF kit includes our newly introduced E8 transmitter and Transporter 2 goggles from the Tinyhawk 3 RTF however the goggles included with the EZ Pilot Pro do not include a built-in DVR like the TH3 RTF as this is part of the cost savings and feature set dedicated to the higher-end kit.

Specifications

EMAX PILOT PRO FPV DRONE

  • VTX: 200-100-25mW 37CH Switchable w/ SmartAudio support
  • Propeller: AVAN TH Turtlemode 4-Bladed Prop
  • FC: Matek F411 (STM32F411 firmware)
  • EMAX Tiny Receiver (SPI / Frsky_D8)
  • Motor: 08025 15000Kv Motor
  • Weight: 34g without battery
  • Battery: 1S HV 450mAh
  • Camera: 1200TVL E01
  • Size: 114x98x40mm
  • Wheelbase: 75m
  • ESC: 4-in-1 / 6A
  • Brand: Emax

EMAX E8 RADIO TRANSMITTER

  • Charging System: Built-in USB 5V--1A linear lithium-ion battery charging system
  • External interface: Micro USB,3.5mm Audio interface (wired coach interface)
  • Frequency 2.4GHz (2400MHz-2483.5MHz)
  • Maximum Size: L*W*H=150x140x45mm
  • Battery: 18650 Lithium-ion battery
  • Weight (Without Battery): 260g
  • Number Of Channels: 8CH
  • Working Voltage: 4.2V-3.3V
  • Output: 22dbm

EMAX TRANSPORTER 2 GOGGLES

  • Charging System: Built-in USB 5V--1A linear lithium-ion battery charging system
  • Maximum Size: (Without antenna - Folded) 155x100x90mm
  • Frequency: 5.8GHz(5658MHz-5945MHz)
  • Video: VGA/D1/HD (Off/3min/5min/10min)
  • DVR: 32G TF card (max), MJPEG, AVI
  • Battery: 1300mAh Lithium-ion battery
  • Screen resolution: 480X800
  • Weight (With battery): 398g
  • Working Voltage: 4.2V-3.7V
  • Screen size: 4.3 inch

Includes

  • 1x Emax EZ Pilot Pro Beginner FPV Drone
  • 1x Emax Transporter 2 Goggles (w/o DVR)
  • 1x Turtle Mode Propeller Set (2CW/2CCW)
  • 1x Emax 1s HV 450mAh Lipo Battery
  • 1x Monitor Mounting Hardware Set
  • 1x Emax E8 Transmitter 
  • 1x Bracket Accessories
  • 1x Instruction Manual
  • 1x Hardware Set
  • 1x Screwdriver
  • 1x USB Cable
  • 2x Antenna

    *** EXTRAS ***

    1x - BetaFPV 6 Ports 1S charger - BT2.0
    2x - Tinyhawk III Spare Parts - 15000kv motors
    3x - RDQ450 450mAh 1s 3.8v 80c PH2.0 batteries
    3x - AVAN Turtlemode props (3 sets of props - 4 per bag)

“REMOVE PROPS BEFORE CONNECTING TO BETAFLIGHT/INAV, BENCH TESTING, OR SETUP”





 

GREAT FOR BEGINNERS

EZ Pilot Pro is an entry-level Ready To Fly (RTF) kit that provides new customers with everything they would need to get started and have a great experience but without too many other frills and features. EZ Pilot Pro is an addition to the previous EZ Pilot product line however the "Pro" designation indicates that this model is capable of acro mode and Betaflight programming similar to Tinyhawk that EZ Pilot previously lacked. While "Pro" isn't the first word to come to mind with a beginner product, it allows the pilot to learn all the skills necessary at a lower cost so they are then able to upgrade and fly professionally whether that be racing or commercial filming with the skills they learned on EZ Pilot Pro RTF.

COST-EFFECTIVE FEATURES

The drone in this kit is a redesigned original Tinyhawk that's been optimized for maximum durability for new pilots and adds an adjustable camera angle. The RTF kit includes our newly introduced E8 transmitter and Transporter 2 goggles from the Tinyhawk 3 RTF however the goggles included with the EZ Pilot Pro do not include a built-in DVR like the TH3 RTF as this is part of the cost savings and feature set dedicated to the higher-end kit.

Specifications

EMAX PILOT PRO FPV DRONE

  • VTX: 200-100-25mW 37CH Switchable w/ SmartAudio support
  • Propeller: AVAN TH Turtlemode 4-Bladed Prop
  • FC: Matek F411 (STM32F411 firmware)
  • EMAX Tiny Receiver (SPI / Frsky_D8)
  • Motor: 08025 15000Kv Motor
  • Weight: 34g without battery
  • Battery: 1S HV 450mAh
  • Camera: 1200TVL E01
  • Size: 114x98x40mm
  • Wheelbase: 75m
  • ESC: 4-in-1 / 6A
  • Brand: Emax

EMAX E8 RADIO TRANSMITTER

  • Charging System: Built-in USB 5V--1A linear lithium-ion battery charging system
  • External interface: Micro USB,3.5mm Audio interface (wired coach interface)
  • Frequency 2.4GHz (2400MHz-2483.5MHz)
  • Maximum Size: L*W*H=150x140x45mm
  • Battery: 18650 Lithium-ion battery
  • Weight (Without Battery): 260g
  • Number Of Channels: 8CH
  • Working Voltage: 4.2V-3.3V
  • Output: 22dbm

EMAX TRANSPORTER 2 GOGGLES

  • Charging System: Built-in USB 5V--1A linear lithium-ion battery charging system
  • Maximum Size: (Without antenna - Folded) 155x100x90mm
  • Frequency: 5.8GHz(5658MHz-5945MHz)
  • Video: VGA/D1/HD (Off/3min/5min/10min)
  • DVR: 32G TF card (max), MJPEG, AVI
  • Battery: 1300mAh Lithium-ion battery
  • Screen resolution: 480X800
  • Weight (With battery): 398g
  • Working Voltage: 4.2V-3.7V
  • Screen size: 4.3 inch

Includes

  • 1x Emax EZ Pilot Pro Beginner FPV Drone
  • 1x Emax Transporter 2 Goggles (w/o DVR)
  • 1x Turtle Mode Propeller Set (2CW/2CCW)
  • 1x Emax 1s HV 450mAh Lipo Battery
  • 1x Monitor Mounting Hardware Set
  • 1x Emax E8 Transmitter 
  • 1x Bracket Accessories
  • 1x Instruction Manual
  • 1x Hardware Set
  • 1x Screwdriver
  • 1x USB Cable
  • 2x Antenna

    *** EXTRAS ***

    1x - BetaFPV 6 Ports 1S charger - BT2.0
    2x - Tinyhawk III Spare Parts - 15000kv motors
    3x - RDQ450 450mAh 1s 3.8v 80c PH2.0 batteries
    3x - AVAN Turtlemode props (3 sets of props - 4 per bag)