HOLYBRO KAKUTE H7 MINI W/TEKKO32 F4 4IN1 MINI 45A ESC STACK - DJI PNP 20X20MM HOLYBRO KAKUTE H7 MINI W/TEKKO32 F4 4IN1 MINI 45A ESC STACK - DJI PNP 20X20MM Catalyst Machineworks The Holybro Kakute H7 Mini is a Flight Controller full of features including onboard VTX ON/OFF Pit Switch with battery voltage, HD System/VTX & 4in1 ESC plugs, barometer, OSD, 6x UARTs, easy soldering layout and much more. Combined with the Tekko32 F4 4-in-1 Mini 45A ESC, this stack is a compact and feature packed power house. The Kakute H7 Mini builds upon the best features of its F7 predecessor and further improves on hardware components and layout. HD ready, it has an easy plug to power HD system like Caddx Vista while supporting analog system. It features an onboard “VTX ON/OFF Pit Switch” that allows you to completely power off the video transmitter using a switch on your RC transmitter. Great if you are working on your drone, waiting for the GPS to get a fix, getting ready for a race while preventing it from overheating or interfering with others flying. It has 6x dedicated UART ports with built-in inversion for peripherals, 4in1 ESC plug, and x8 compatible with M5-M8 Signal Pads, allowing easy support for x8 Octocopter configuration. The integrated BetaFlight OSD makes it easy to display important information on your FPV display like battery voltage, flight time, warnings, RSSI, smart audio features and more. It is also ready for autonomous flight with the on-board barometer. There are LED & buzzer pad, I2C pad (SDA & SCL) for external GPS/Magnetometers. Note: The Kakute H7 ships with customized version of Betaflight 4.3 Firmware from the factory. Using Betaflight configurator 10.7.1 or below with betaflight 4.3 might show a warning when first connected, you can upgrade the BF Configurator (once available),  or ignore the warning and proceed with configuration. Kakute H7 is compatible with 4.2.11 and up. With Betaflight 4.2.11, some SD card model might be encounter an error. SPECIFICATIONS: KAKUTE H7 MINI FLIGHT CONTROLLER: Input Voltage: 2-6S MCU - STM32H743 32-bit processor running at 480 MHz IMU - MPU6000 Barometer - BMP280 OSD - AT7456E 6x UARTs (1,2,3,4,6,7) 9x PWM Outputs (8 Motor Output, 1 LED) 1 x JST-SH1.0_8pin port (4in1 ESCs) 1x JST-GH1.0_6pin port (For HD System like Caddx Vista & Air Unit) BEC: 5V 2A Cont. Mounting: 20x20mm/Φ3.6mm hole with ΦM3 and M2 Grommets Dimension: 31x30x6mm Weight: 5.5g  TEKKO32 F4 4-IN-1 MINI 45A ESC: Continuous Current: 45A x 4 Supports 3-6S battery Supports Dshot 150/300/600/1200 & MultiShot/OneShot/Proshot/PWM etc. ESC telemetry Supported Onboard analog current sensor No output BEC BLHeli_32 firmware 1000uf 35v capacitor included (highly recommended for 6s setup) Amperage meter scale ratio: 168 Dimensions: 30x39mm / Weight: 7.2g Mounting holes: M3 20x20mm (M3 grommets included) PACKAGE INCLUDES: 1 x Kakute H7 Mini Flight Controller 1 x Tekko32 F4 4in1 mini 45A ESC 1 x Electrolytic capacitor: 1000uF 35v 4 x M2 Anti-Vibration Silicone Grommet Insert 1 x JST SH 8pin to 8pin 65mm cable 1 x JST SH 8pin to 8pin 25mm cable 1 x JST SH 6pin 150mm cable (The cable that goes to the CADDX Vista Air Unit is included.) 1 x JST SH 6pin to GH 8pin 150mm cable (The cable that goes to the DJI Air Unit is included.) 1 x JST SH 6pin to GH 8pin 80mm cable (The cable that goes to the DJI Air Unit is included.) MANUAL: Kakute H7 Mini Flight Controller Manual Tekko32 F4 4-in-1 Mini 45A ESC Manual    

HOLYBRO KAKUTE H7 MINI W/TEKKO32 F4 4IN1 MINI 45A ESC STACK - DJI PNP 20X20MM

Code: CM02089

The Holybro Kakute H7 Mini is a Flight Controller full of features including onboard VTX ON/OFF Pit Switch with battery voltage, HD System/VTX & 4in1 ESC plugs, barometer, OSD, 6x UARTs, easy soldering layout and much more. Combined with the Tekko32 F4 4-in-1 Mini 45A ESC, this stack is a compact and feature packed power house.

The Kakute H7 Mini builds upon the best features of its F7 predecessor and further improves on hardware components and layout. HD ready, it has an easy plug to power HD system like Caddx Vista while supporting analog system.

It features an onboard “VTX ON/OFF Pit Switch” that allows you to completely power off the video transmitter using a switch on your RC transmitter. Great if you are working on your drone, waiting for the GPS to get a fix, getting ready for a race while preventing it from overheating or interfering with others flying.

It has 6x dedicated UART ports with built-in inversion for peripherals, 4in1 ESC plug, and x8 compatible with M5-M8 Signal Pads, allowing easy support for x8 Octocopter configuration.

The integrated BetaFlight OSD makes it easy to display important information on your FPV display like battery voltage, flight time, warnings, RSSI, smart audio features and more. It is also ready for autonomous flight with the on-board barometer. There are LED & buzzer pad, I2C pad (SDA & SCL) for external GPS/Magnetometers.


Note:

The Kakute H7 ships with customized version of Betaflight 4.3 Firmware from the factory. Using Betaflight configurator 10.7.1 or below with betaflight 4.3 might show a warning when first connected, you can upgrade the BF Configurator (once available),  or ignore the warning and proceed with configuration. 
Kakute H7 is compatible with 4.2.11 and up. With Betaflight 4.2.11, some SD card model might be encounter an error.

SPECIFICATIONS:

KAKUTE H7 MINI FLIGHT CONTROLLER:

  • Input Voltage: 2-6S
  • MCU - STM32H743 32-bit processor running at 480 MHz
  • IMU - MPU6000
  • Barometer - BMP280
  • OSD - AT7456E
  • 6x UARTs (1,2,3,4,6,7)
  • 9x PWM Outputs (8 Motor Output, 1 LED)
  • 1 x JST-SH1.0_8pin port (4in1 ESCs)
  • 1x JST-GH1.0_6pin port (For HD System like Caddx Vista & Air Unit)
  • BEC: 5V 2A Cont.
  • Mounting: 20x20mm/Φ3.6mm hole with ΦM3 and M2 Grommets
  • Dimension: 31x30x6mm
  • Weight: 5.5g 

TEKKO32 F4 4-IN-1 MINI 45A ESC:

  • Continuous Current: 45A x 4
  • Supports 3-6S battery
  • Supports Dshot 150/300/600/1200 & MultiShot/OneShot/Proshot/PWM etc.
  • ESC telemetry Supported
  • Onboard analog current sensor
  • No output BEC
  • BLHeli_32 firmware
  • 1000uf 35v capacitor included (highly recommended for 6s setup)
  • Amperage meter scale ratio: 168
  • Dimensions: 30x39mm / Weight: 7.2g
  • Mounting holes: M3 20x20mm (M3 grommets included)

    PACKAGE INCLUDES:

    • 1 x Kakute H7 Mini Flight Controller
    • 1 x Tekko32 F4 4in1 mini 45A ESC
    • 1 x Electrolytic capacitor: 1000uF 35v
    • 4 x M2 Anti-Vibration Silicone Grommet Insert
    • 1 x JST SH 8pin to 8pin 65mm cable
    • 1 x JST SH 8pin to 8pin 25mm cable
    • 1 x JST SH 6pin 150mm cable (The cable that goes to the CADDX Vista Air Unit is included.)
    • 1 x JST SH 6pin to GH 8pin 150mm cable (The cable that goes to the DJI Air Unit is included.)
    • 1 x JST SH 6pin to GH 8pin 80mm cable (The cable that goes to the DJI Air Unit is included.)

    MANUAL:

    Kakute H7 Mini Flight Controller Manual

    Tekko32 F4 4-in-1 Mini 45A ESC Manual

       

       

      The Holybro Kakute H7 Mini is a Flight Controller full of features including onboard VTX ON/OFF Pit Switch with battery voltage, HD System/VTX & 4in1 ESC plugs, barometer, OSD, 6x UARTs, easy soldering layout and much more. Combined with the Tekko32 F4 4-in-1 Mini 45A ESC, this stack is a compact and feature packed power house.

      The Kakute H7 Mini builds upon the best features of its F7 predecessor and further improves on hardware components and layout. HD ready, it has an easy plug to power HD system like Caddx Vista while supporting analog system.

      It features an onboard “VTX ON/OFF Pit Switch” that allows you to completely power off the video transmitter using a switch on your RC transmitter. Great if you are working on your drone, waiting for the GPS to get a fix, getting ready for a race while preventing it from overheating or interfering with others flying.

      It has 6x dedicated UART ports with built-in inversion for peripherals, 4in1 ESC plug, and x8 compatible with M5-M8 Signal Pads, allowing easy support for x8 Octocopter configuration.

      The integrated BetaFlight OSD makes it easy to display important information on your FPV display like battery voltage, flight time, warnings, RSSI, smart audio features and more. It is also ready for autonomous flight with the on-board barometer. There are LED & buzzer pad, I2C pad (SDA & SCL) for external GPS/Magnetometers.


      Note:

      The Kakute H7 ships with customized version of Betaflight 4.3 Firmware from the factory. Using Betaflight configurator 10.7.1 or below with betaflight 4.3 might show a warning when first connected, you can upgrade the BF Configurator (once available),  or ignore the warning and proceed with configuration. 
      Kakute H7 is compatible with 4.2.11 and up. With Betaflight 4.2.11, some SD card model might be encounter an error.

      SPECIFICATIONS:

      KAKUTE H7 MINI FLIGHT CONTROLLER:

      • Input Voltage: 2-6S
      • MCU - STM32H743 32-bit processor running at 480 MHz
      • IMU - MPU6000
      • Barometer - BMP280
      • OSD - AT7456E
      • 6x UARTs (1,2,3,4,6,7)
      • 9x PWM Outputs (8 Motor Output, 1 LED)
      • 1 x JST-SH1.0_8pin port (4in1 ESCs)
      • 1x JST-GH1.0_6pin port (For HD System like Caddx Vista & Air Unit)
      • BEC: 5V 2A Cont.
      • Mounting: 20x20mm/Φ3.6mm hole with ΦM3 and M2 Grommets
      • Dimension: 31x30x6mm
      • Weight: 5.5g 

      TEKKO32 F4 4-IN-1 MINI 45A ESC:

      • Continuous Current: 45A x 4
      • Supports 3-6S battery
      • Supports Dshot 150/300/600/1200 & MultiShot/OneShot/Proshot/PWM etc.
      • ESC telemetry Supported
      • Onboard analog current sensor
      • No output BEC
      • BLHeli_32 firmware
      • 1000uf 35v capacitor included (highly recommended for 6s setup)
      • Amperage meter scale ratio: 168
      • Dimensions: 30x39mm / Weight: 7.2g
      • Mounting holes: M3 20x20mm (M3 grommets included)

        PACKAGE INCLUDES:

        • 1 x Kakute H7 Mini Flight Controller
        • 1 x Tekko32 F4 4in1 mini 45A ESC
        • 1 x Electrolytic capacitor: 1000uF 35v
        • 4 x M2 Anti-Vibration Silicone Grommet Insert
        • 1 x JST SH 8pin to 8pin 65mm cable
        • 1 x JST SH 8pin to 8pin 25mm cable
        • 1 x JST SH 6pin 150mm cable (The cable that goes to the CADDX Vista Air Unit is included.)
        • 1 x JST SH 6pin to GH 8pin 150mm cable (The cable that goes to the DJI Air Unit is included.)
        • 1 x JST SH 6pin to GH 8pin 80mm cable (The cable that goes to the DJI Air Unit is included.)

        MANUAL:

        Kakute H7 Mini Flight Controller Manual

        Tekko32 F4 4-in-1 Mini 45A ESC Manual