iFlight SucceX Micro Fly Tower System 20x20 (ESC/FC) 2-6S iFlight SucceX Micro Fly Tower System 20x20 (ESC/FC) 2-6S Catalyst Machineworks The SucceX Mini F4 + 35A Fly Tower is a flight controller designed for maximum installation comfort and extreme performance. In the "mini" stack with a 20x20mm hole spacing category, it is one of just a few few FCs suited to 2-6S LiPo cells. The stack consists of an F4 processor and a proven MPU6000 gyro in combination with 4in1 controllers rated at 35A of continuous load. The connection of the controller to the control unit is solved without the need to solder: via pin bar. The entire stack is connected by steel screws to ensure that they are firmly aligned to avoid damage to the joint. The manufacturer also fastens the FC over rubber washers to facilitate filtering of vibrations. Due to its dimensions, current capacities and power up to 6S, it is a full-featured stack not only for indoor racing copters, but also for full-fledged racing mini quads . The stack is delivered completely assembled as you can see on product photos from the manufacturer. V2 version includes current sensor and better video signal filtering. Key Features   SucceX mini F4 Flight Controller: MCU: 100MHz STM32F405 IMU: MPU6000 gyro / accelerometer (SPI) Integrated LC Filter Power supply: 2-6S Lipo OSD: BetaFlight OSD w / AT7456E chip BEC Output: 5V @ 3A Dimensions: 26x26mm plate, 20x20mm mounting holes (M2) VCP, UART LED Output: Yes Buzzer output: 5V buzzer   SucceX Mini 35A 2-6S 4 in 1 ESC: MCU: STM32F051 Power supply: 2-6S LiPo Mounting holes: 20x20mm, M2 Target: iFlight-BL32-4IN1 Constant current: 35 A Short-term: 45A Dimensions: 31x31mm (including power strips) Mounting hole spacing: 20x20mm Protocols: Dshot1200, Proshot, Oneshot, Multishot   Package Includes Built-in SucceX Mini F4 + 35A Fly Tower stack Complete accessories (cable set)

iFlight SucceX Micro Fly Tower System 20x20 (ESC/FC) 2-6S

Code: CM01334
Sale

The SucceX Mini F4 + 35A Fly Tower is a flight controller designed for maximum installation comfort and extreme performance. In the "mini" stack with a 20x20mm hole spacing category, it is one of just a few few FCs suited to 2-6S LiPo cells. The stack consists of an F4 processor and a proven MPU6000 gyro in combination with 4in1 controllers rated at 35A of continuous load. The connection of the controller to the control unit is solved without the need to solder: via pin bar. The entire stack is connected by steel screws to ensure that they are firmly aligned to avoid damage to the joint. The manufacturer also fastens the FC over rubber washers to facilitate filtering of vibrations.

Due to its dimensions, current capacities and power up to 6S, it is a full-featured stack not only for indoor racing copters, but also for full-fledged racing mini quads .

The stack is delivered completely assembled as you can see on product photos from the manufacturer.

V2 version includes current sensor and better video signal filtering.

Key Features

 

SucceX mini F4 Flight Controller:
  • MCU: 100MHz STM32F405
  • IMU: MPU6000 gyro / accelerometer (SPI)
  • Integrated LC Filter
  • Power supply: 2-6S Lipo
  • OSD: BetaFlight OSD w / AT7456E chip
  • BEC Output: 5V @ 3A
  • Dimensions: 26x26mm plate, 20x20mm mounting holes (M2)
  • VCP, UART
  • LED Output: Yes
  • Buzzer output: 5V buzzer

 

SucceX Mini 35A 2-6S 4 in 1 ESC:
  • MCU: STM32F051
  • Power supply: 2-6S LiPo
  • Mounting holes: 20x20mm, M2
  • Target: iFlight-BL32-4IN1
  • Constant current: 35 A
  • Short-term: 45A
  • Dimensions: 31x31mm (including power strips)
  • Mounting hole spacing: 20x20mm
  • Protocols: Dshot1200, Proshot, Oneshot, Multishot

 

Package Includes

  • Built-in SucceX Mini F4 + 35A Fly Tower stack
  • Complete accessories (cable set)

The SucceX Mini F4 + 35A Fly Tower is a flight controller designed for maximum installation comfort and extreme performance. In the "mini" stack with a 20x20mm hole spacing category, it is one of just a few few FCs suited to 2-6S LiPo cells. The stack consists of an F4 processor and a proven MPU6000 gyro in combination with 4in1 controllers rated at 35A of continuous load. The connection of the controller to the control unit is solved without the need to solder: via pin bar. The entire stack is connected by steel screws to ensure that they are firmly aligned to avoid damage to the joint. The manufacturer also fastens the FC over rubber washers to facilitate filtering of vibrations.

Due to its dimensions, current capacities and power up to 6S, it is a full-featured stack not only for indoor racing copters, but also for full-fledged racing mini quads .

The stack is delivered completely assembled as you can see on product photos from the manufacturer.

V2 version includes current sensor and better video signal filtering.

Key Features

 

SucceX mini F4 Flight Controller:
  • MCU: 100MHz STM32F405
  • IMU: MPU6000 gyro / accelerometer (SPI)
  • Integrated LC Filter
  • Power supply: 2-6S Lipo
  • OSD: BetaFlight OSD w / AT7456E chip
  • BEC Output: 5V @ 3A
  • Dimensions: 26x26mm plate, 20x20mm mounting holes (M2)
  • VCP, UART
  • LED Output: Yes
  • Buzzer output: 5V buzzer

 

SucceX Mini 35A 2-6S 4 in 1 ESC:
  • MCU: STM32F051
  • Power supply: 2-6S LiPo
  • Mounting holes: 20x20mm, M2
  • Target: iFlight-BL32-4IN1
  • Constant current: 35 A
  • Short-term: 45A
  • Dimensions: 31x31mm (including power strips)
  • Mounting hole spacing: 20x20mm
  • Protocols: Dshot1200, Proshot, Oneshot, Multishot

 

Package Includes

  • Built-in SucceX Mini F4 + 35A Fly Tower stack
  • Complete accessories (cable set)