Immortal T Crossfire Antenna Mount - Cannonball 800 Immortal T Crossfire Antenna Mount - Cannonball 800 Catalyst Machineworks This part is made of flexible black TPU. It locates the popular crossfire "Immortal T" antenna to the rear of the Cannonball 800 in an ideal location for best reception and crash protection.  What is included?  1 x TPU Immortal T Mount 2 x Aluminum M3 X 12mm Socket Head Screws  2 x Aluminum M3 Washer  2 x Brass Press Nut    How to install the press nuts: The press nuts are installed from below the part. DO NOT install them prior to running the screw in the hole. The TPU will compress the nut and you will not be able to get the screw in. Instead, run the screw in the hole first. Then thread the nut to the screw from below. Then turn the screw/nut until the nut is pulled up into the part to seat it correctly. 

Immortal T Crossfire Antenna Mount - Cannonball 800

Code: CM01161

This part is made of flexible black TPU. It locates the popular crossfire "Immortal T" antenna to the rear of the Cannonball 800 in an ideal location for best reception and crash protection. 

What is included? 

1 x TPU Immortal T Mount

2 x Aluminum M3 X 12mm Socket Head Screws 

2 x Aluminum M3 Washer 

2 x Brass Press Nut 

 

How to install the press nuts:

The press nuts are installed from below the part. DO NOT install them prior to running the screw in the hole. The TPU will compress the nut and you will not be able to get the screw in. Instead, run the screw in the hole first. Then thread the nut to the screw from below. Then turn the screw/nut until the nut is pulled up into the part to seat it correctly. 

This part is made of flexible black TPU. It locates the popular crossfire "Immortal T" antenna to the rear of the Cannonball 800 in an ideal location for best reception and crash protection. 

What is included? 

1 x TPU Immortal T Mount

2 x Aluminum M3 X 12mm Socket Head Screws 

2 x Aluminum M3 Washer 

2 x Brass Press Nut 

 

How to install the press nuts:

The press nuts are installed from below the part. DO NOT install them prior to running the screw in the hole. The TPU will compress the nut and you will not be able to get the screw in. Instead, run the screw in the hole first. Then thread the nut to the screw from below. Then turn the screw/nut until the nut is pulled up into the part to seat it correctly.