Merica 8"/9"/10" Canopy - (Caddx Air Unit / Vista) Merica 8"/9"/10" Canopy - (Caddx Air Unit / Vista) Catalyst Machineworks This canopy is specially designed to allow you to install the Caddx Air Unit with included Nylon adapter piece. Double sided stick tape joins the adapter to the Air Unit. The adapter/Air Unit combo is then held to the underside of the canopy using the included self tapping screws. The Air Unit's dual antennas are joined to the back of the canopy by placing them in the appropriate holding slots and then using zip ties to hold them in place. This same canopy will also allow for your to install a Caddx Nebula Pro Vista, Caddx Polar Vista system, or analog FPV system. You might consider THIS optional part if you want to go analog.  Features:  Sleek and sexy look Nearly indestructible Light weight yet strong AF Aerodynamic  Available in multiple colors  Fits the Caddx Air Unit, Caddx Polar Air Unit, Caddx Nebula Pro, Caddx Polar Vista, original Caddx Vista Will NOT fit original DJI Air Unit Can also be used with an analog FPV system Specs:  Weight: 33g Fits the 8", 9", and 10" frames Color Options: Black, Red, Blue, Green, Yellow Camera min/max camera angle: 10 - 60 degree Includes:  1 x 3D printed canopy 4 x M2 Nylock Nut Steel 4 x M2 Washer 4 x M2 X 5mm Socket Screw 4 x M2 X 18mm Socket Screw 2 x Self Tapping Screw #2 x 7/16" long 2 x Self Tapping Screw #2 x 5/16" long 1 x Air Unit Adapter Plate            

Merica 8"/9"/10" Canopy - (Caddx Air Unit / Vista)

Code: CM01948
$37.99
In Stock
Add to Wishlist Add to Compare

This canopy is specially designed to allow you to install the Caddx Air Unit with included Nylon adapter piece. Double sided stick tape joins the adapter to the Air Unit. The adapter/Air Unit combo is then held to the underside of the canopy using the included self tapping screws. The Air Unit's dual antennas are joined to the back of the canopy by placing them in the appropriate holding slots and then using zip ties to hold them in place. This same canopy will also allow for your to install a Caddx Nebula Pro Vista, Caddx Polar Vista system, or analog FPV system. You might consider THIS optional part if you want to go analog. 

Features: 

  • Sleek and sexy look
  • Nearly indestructible
  • Light weight yet strong AF
  • Aerodynamic 
  • Available in multiple colors 
  • Fits the Caddx Air Unit, Caddx Polar Air Unit, Caddx Nebula Pro, Caddx Polar Vista, original Caddx Vista
  • Will NOT fit original DJI Air Unit
  • Can also be used with an analog FPV system

Specs: 

  • Weight: 33g
  • Fits the 8", 9", and 10" frames
  • Color Options: Black, Red, Blue, Green, Yellow
  • Camera min/max camera angle: 10 - 60 degree

Includes: 

1 x 3D printed canopy
4 x M2 Nylock Nut Steel
4 x M2 Washer
4 x M2 X 5mm Socket Screw
4 x M2 X 18mm Socket Screw 
2 x Self Tapping Screw #2 x 7/16" long 
2 x Self Tapping Screw #2 x 5/16" long 
1 x Air Unit Adapter Plate

 

 


 

 

 

 

This canopy is specially designed to allow you to install the Caddx Air Unit with included Nylon adapter piece. Double sided stick tape joins the adapter to the Air Unit. The adapter/Air Unit combo is then held to the underside of the canopy using the included self tapping screws. The Air Unit's dual antennas are joined to the back of the canopy by placing them in the appropriate holding slots and then using zip ties to hold them in place. This same canopy will also allow for your to install a Caddx Nebula Pro Vista, Caddx Polar Vista system, or analog FPV system. You might consider THIS optional part if you want to go analog. 

Features: 

  • Sleek and sexy look
  • Nearly indestructible
  • Light weight yet strong AF
  • Aerodynamic 
  • Available in multiple colors 
  • Fits the Caddx Air Unit, Caddx Polar Air Unit, Caddx Nebula Pro, Caddx Polar Vista, original Caddx Vista
  • Will NOT fit original DJI Air Unit
  • Can also be used with an analog FPV system

Specs: 

  • Weight: 33g
  • Fits the 8", 9", and 10" frames
  • Color Options: Black, Red, Blue, Green, Yellow
  • Camera min/max camera angle: 10 - 60 degree

Includes: 

1 x 3D printed canopy
4 x M2 Nylock Nut Steel
4 x M2 Washer
4 x M2 X 5mm Socket Screw
4 x M2 X 18mm Socket Screw 
2 x Self Tapping Screw #2 x 7/16" long 
2 x Self Tapping Screw #2 x 5/16" long 
1 x Air Unit Adapter Plate