Merica HD Canopy (Adjustable 30 - 50 Degrees) Merica HD Canopy (Adjustable 30 - 50 Degrees) Catalyst Machineworks UPDATE 5-28-21: We are now offering these canopies on a 'print to order' basis. Meaning we do not start printing it until you order.  This canopy will allow you to attach a GoPro Session camera to our Merica frame. The same canopy fits all frame sizes from 3" all the way to 6". You fasten this TPU session mount to the canopy using the included hardware. Please be aware you must buy the TPU session mount separate. It is NOT INCLUDED. The mount will allow your session to be adjusted from 30 to 50 degrees in 5 degree increments.  FEATURES:  Made of tough as nails TPU (thermoplastic polyurethane) 3D printed material Aerodynamic  Looks amazing Light weight Stress relief mounting for both SMA and U.FL type FPV antenna RC RX antenna mount built in Accepts only the Runcam Micro Swift or Foxeer Micro Arrow SPECS:  Weight: 15g Color Options: Black Material: 3D printed TPU FPV Camera min/max camera angle: 10 - 70 degree The TPU session mount top is SOLD SEPARATE GoPro camera is NOT INCLUDED Session camera min/max camera angle: 30 - 50 degree (in 5 degree increments) Supported FPV Cameras: Runcam Micro Eagle, Runcam Micro Swift 2, Foxeer Predator Micro, Foxeer Micro Monster, Runcam Micro Sparrow 2, or similar  INCLUDED WITH PURCHASE:   1 x 3D Printed TPU Canopy  2 x M3 X 30mm Socket Head Screws (Steel) 1 x M3 X 20mm  Socket Head Screws (Steel) 1 x M3 Press in nut (brass) 2 x Nylock Nuts (steel)  3 x Aluminum Washer 1 x Plastic Adjustment Bar (30 degrees) 1 x Plastic  Adjustment Bar (35 degrees) 1 x Plastic  Adjustment Bar (40 degrees) 1 x Plastic  Adjustment Bar (45 degrees) 1 x Plastic  Adjustment Bar (50 degrees)      

Merica HD Canopy (Adjustable 30 - 50 Degrees)

Code: CM00899

UPDATE 5-28-21: We are now offering these canopies on a 'print to order' basis. Meaning we do not start printing it until you order. 

This canopy will allow you to attach a GoPro Session camera to our Merica frame. The same canopy fits all frame sizes from 3" all the way to 6". You fasten this TPU session mount to the canopy using the included hardware. Please be aware you must buy the TPU session mount separate. It is NOT INCLUDED. The mount will allow your session to be adjusted from 30 to 50 degrees in 5 degree increments. 

FEATURES: 

  • Made of tough as nails TPU (thermoplastic polyurethane) 3D printed material
  • Aerodynamic 
  • Looks amazing
  • Light weight
  • Stress relief mounting for both SMA and U.FL type FPV antenna
  • RC RX antenna mount built in
  • Accepts only the Runcam Micro Swift or Foxeer Micro Arrow

SPECS: 

  • Weight: 15g
  • Color Options: Black
  • Material: 3D printed TPU
  • FPV Camera min/max camera angle: 10 - 70 degree
  • The TPU session mount top is SOLD SEPARATE
  • GoPro camera is NOT INCLUDED
  • Session camera min/max camera angle: 30 - 50 degree (in 5 degree increments)
  • Supported FPV Cameras: Runcam Micro Eagle, Runcam Micro Swift 2, Foxeer Predator Micro, Foxeer Micro Monster, Runcam Micro Sparrow 2, or similar 

INCLUDED WITH PURCHASE:  

  • 1 x 3D Printed TPU Canopy 
  • 2 x M3 X 30mm Socket Head Screws (Steel)
  • 1 x M3 X 20mm  Socket Head Screws (Steel)
  • 1 x M3 Press in nut (brass)
  • 2 x Nylock Nuts (steel) 
  • 3 x Aluminum Washer
  • 1 x Plastic Adjustment Bar (30 degrees)
  • 1 x Plastic  Adjustment Bar (35 degrees)
  • 1 x Plastic  Adjustment Bar (40 degrees)
  • 1 x Plastic  Adjustment Bar (45 degrees)
  • 1 x Plastic  Adjustment Bar (50 degrees)

 

 

 

UPDATE 5-28-21: We are now offering these canopies on a 'print to order' basis. Meaning we do not start printing it until you order. 

This canopy will allow you to attach a GoPro Session camera to our Merica frame. The same canopy fits all frame sizes from 3" all the way to 6". You fasten this TPU session mount to the canopy using the included hardware. Please be aware you must buy the TPU session mount separate. It is NOT INCLUDED. The mount will allow your session to be adjusted from 30 to 50 degrees in 5 degree increments. 

FEATURES: 

  • Made of tough as nails TPU (thermoplastic polyurethane) 3D printed material
  • Aerodynamic 
  • Looks amazing
  • Light weight
  • Stress relief mounting for both SMA and U.FL type FPV antenna
  • RC RX antenna mount built in
  • Accepts only the Runcam Micro Swift or Foxeer Micro Arrow

SPECS: 

  • Weight: 15g
  • Color Options: Black
  • Material: 3D printed TPU
  • FPV Camera min/max camera angle: 10 - 70 degree
  • The TPU session mount top is SOLD SEPARATE
  • GoPro camera is NOT INCLUDED
  • Session camera min/max camera angle: 30 - 50 degree (in 5 degree increments)
  • Supported FPV Cameras: Runcam Micro Eagle, Runcam Micro Swift 2, Foxeer Predator Micro, Foxeer Micro Monster, Runcam Micro Sparrow 2, or similar 

INCLUDED WITH PURCHASE:  

  • 1 x 3D Printed TPU Canopy 
  • 2 x M3 X 30mm Socket Head Screws (Steel)
  • 1 x M3 X 20mm  Socket Head Screws (Steel)
  • 1 x M3 Press in nut (brass)
  • 2 x Nylock Nuts (steel) 
  • 3 x Aluminum Washer
  • 1 x Plastic Adjustment Bar (30 degrees)
  • 1 x Plastic  Adjustment Bar (35 degrees)
  • 1 x Plastic  Adjustment Bar (40 degrees)
  • 1 x Plastic  Adjustment Bar (45 degrees)
  • 1 x Plastic  Adjustment Bar (50 degrees)