Multicolor Session Mount - BangGod and Raging Droner 5R (red/black)
One bar is included with this camera mount to set angle at 30 degrees. Other angles are available here.
This product allows you to mount a GoPro Session HD camera to the BangGod and Raging Droner 5R Frames. Printed in beautiful red/black multicolor! Press your camera into this mount and then fasten it to the frame with the included hardware.
Features:
- Made of tough as nails "TPU" 3D printed material
- Best camera protection of any mount in the FPV industry
- Multicolor black and red printed into the mount
- Camera can be installed and removed quickly
Specs:
- Weight: 17g
- Fit only the Raging Droner 5R
- Color: Black and Red
- Material: 3D printed TPU
- Includes a 30 degree angle adjustment bar (Other angles available and sold separate)
- This camera mount is designed to work in conjunction with this canopy.
Includes:
Raging Droner:
1 x TPU Camera Mount
1 x Angle Adjustment Bar (30 degrees)
1 x Brass M3 threaded Insert
1 x M3 X 30mm Socket Head Screw
BangGod:
1 x TPU Camera Mount
1 x Small Angle Adjustment Bar (20 - 35 degrees)
1 x Large Angle Adjustment Bar (35 - 50 degrees)
1 x Brass M3 threaded Insert
1 x M3 X 30mm Socket Head Screw
1 x M3 X 40mm Socket Head Screw
1 x M3 Steel Locknut
2 x M3 Washer
1 x M3 X 4.5mm OD X 8mm Long Aluminum Sleeve
1 x M3 X 4.5mm OD X 19mm Long Aluminum Sleeve
Why does this mount cost more than the regular mount? Multicolor printing takes twice as long as single color. In addition, it uses twice the material volume due to the "waste tower" that is printed at the same time. 3D printed part pricing is based off material volume and time.
One bar is included with this camera mount to set angle at 30 degrees. Other angles are available here.
This product allows you to mount a GoPro Session HD camera to the BangGod and Raging Droner 5R Frames. Printed in beautiful red/black multicolor! Press your camera into this mount and then fasten it to the frame with the included hardware.
Features:
- Made of tough as nails "TPU" 3D printed material
- Best camera protection of any mount in the FPV industry
- Multicolor black and red printed into the mount
- Camera can be installed and removed quickly
Specs:
- Weight: 17g
- Fit only the Raging Droner 5R
- Color: Black and Red
- Material: 3D printed TPU
- Includes a 30 degree angle adjustment bar (Other angles available and sold separate)
- This camera mount is designed to work in conjunction with this canopy.
Includes:
Raging Droner:
1 x TPU Camera Mount
1 x Angle Adjustment Bar (30 degrees)
1 x Brass M3 threaded Insert
1 x M3 X 30mm Socket Head Screw
BangGod:
1 x TPU Camera Mount
1 x Small Angle Adjustment Bar (20 - 35 degrees)
1 x Large Angle Adjustment Bar (35 - 50 degrees)
1 x Brass M3 threaded Insert
1 x M3 X 30mm Socket Head Screw
1 x M3 X 40mm Socket Head Screw
1 x M3 Steel Locknut
2 x M3 Washer
1 x M3 X 4.5mm OD X 8mm Long Aluminum Sleeve
1 x M3 X 4.5mm OD X 19mm Long Aluminum Sleeve
Why does this mount cost more than the regular mount? Multicolor printing takes twice as long as single color. In addition, it uses twice the material volume due to the "waste tower" that is printed at the same time. 3D printed part pricing is based off material volume and time.
