PYRO32F3-45AMP "V2" 4IN1 F3 32BIT BLHELI ESC 4X45A PYRO32F3-45AMP "V2" 4IN1 F3 32BIT BLHELI ESC 4X45A Catalyst Machineworks This is the new V2 ESC from the guys over at Hyperlite. This new version is even better!  Improvements over V1:-New layout to make room for the heatsink-Integrated LC FILTER for lower noise-more caps Package includes:1 x PYRO32F3-45AV2  4in1 F3 32bit BLHELI ESC 4x45A4 x Soft mount grommets1 x Wire Harness (Plug N Play with Pyrodrone F4 OSD)1 x 10cm 16AWG silicone wires1 x XT60H Connector2 x 35V 680uF Capacitors (Recommended for 6S setups)1 x ManualFeatures: 32bit ESC with BLHELI32 firmware Supports 3-6S lipo input PWM input, TLM supported Voltage output (VBAT) NO BEC Supports oneshot / Multishot / Dshot PWM Mounting holes 30.5x30.5mm Supports damped light F3 MCU, runs twice faster than F051 Extra Cap needed for high current or 6s usage Aluminum heatsink LC Filter

PYRO32F3-45AMP "V2" 4IN1 F3 32BIT BLHELI ESC 4X45A

Code: CM01440

This is the new V2 ESC from the guys over at Hyperlite. This new version is even better! 

Improvements over V1:
-New layout to make room for the heatsink
-Integrated LC FILTER for lower noise
-more caps

Package includes:
1 x PYRO32F3-45AV2  4in1 F3 32bit BLHELI ESC 4x45A
4 x Soft mount grommets
1 x Wire Harness (Plug N Play with Pyrodrone F4 OSD)
1 x 10cm 16AWG silicone wires
1 x XT60H Connector
2 x 35V 680uF Capacitors (Recommended for 6S setups)
1 x Manual

Features:

  • 32bit ESC with BLHELI32 firmware
  • Supports 3-6S lipo input
  • PWM input, TLM supported
  • Voltage output (VBAT)
  • NO BEC
  • Supports oneshot / Multishot / Dshot PWM
  • Mounting holes 30.5x30.5mm
  • Supports damped light
  • F3 MCU, runs twice faster than F051
  • Extra Cap needed for high current or 6s usage
  • Aluminum heatsink
  • LC Filter

This is the new V2 ESC from the guys over at Hyperlite. This new version is even better! 

Improvements over V1:
-New layout to make room for the heatsink
-Integrated LC FILTER for lower noise
-more caps

Package includes:
1 x PYRO32F3-45AV2  4in1 F3 32bit BLHELI ESC 4x45A
4 x Soft mount grommets
1 x Wire Harness (Plug N Play with Pyrodrone F4 OSD)
1 x 10cm 16AWG silicone wires
1 x XT60H Connector
2 x 35V 680uF Capacitors (Recommended for 6S setups)
1 x Manual

Features:

  • 32bit ESC with BLHELI32 firmware
  • Supports 3-6S lipo input
  • PWM input, TLM supported
  • Voltage output (VBAT)
  • NO BEC
  • Supports oneshot / Multishot / Dshot PWM
  • Mounting holes 30.5x30.5mm
  • Supports damped light
  • F3 MCU, runs twice faster than F051
  • Extra Cap needed for high current or 6s usage
  • Aluminum heatsink
  • LC Filter