Product Page

RaceFlight Bolt V2 4in1 ESC

The RaceFlight Bolt 4in1 electronic speed controller (ESC) was designed for power and performance. Coupled with the Revolt FC the Bolt makes a thin stack while keeping the escs safe inside the frame, protected from prop strikes. The escs are also safe from vibrations thanks...

Regular price
$65.00
Add to Wishlist

The RaceFlight Bolt 4in1 electronic speed controller (ESC) was designed for power and performance. Coupled with the Revolt FC the Bolt makes a thin stack while keeping the escs safe inside the frame, protected from prop strikes. The escs are also safe from vibrations thanks to the integrated RaceFlight Gummies.

The RaceFlight 4in1 is also extremely easy to install. It is compatible with 4s through 6s batteries and has a built-in current sensor that hooks up directly to the Revolt to provide amp draw and mAh consumed information. The Bolt can pin into the revolt and provides the Revolt power.

Specifications:

  • Plug and Play ready for the Revolt F4 Flight Controller (V2)
  • 30.5mm x 30.5mm mounting hole spacing
  • Integrated RaceFlight Gummies
  • 30 amp continuous draw per motor
  • 40 amp burst
  • BlHeli_S
  • 5V voltage regulator capable of 3A continuous output
  • D-Shot ready
  • 4s – 6s compatible
  • Built in Current Sensor
  • Special low noise connector integrated with the Revolt and Bolt pair
  • Current and Voltage sent to flight controller
  • Easy Install
  • High-quality components
  • Weight: 15.5 grams

Includes:

  • 1x Bolt 30A 4-in-1 V2 BLHeli_S ESC
  • 4x Mounting Grommets
  • 2x 25V 6800uF Low ESC Capacitor
  • 20x Individual Male Pin Headers
  • 12x Individual Female Pin Headers

 

Pinout Diagrams

 

Installing the Bolt on a Merica:

The bolt can be installed into any of our Merica frames, from 3" all the way to 6". Below are details on the correct way to install it. For more help visit our facebook tech support group.  

  1. You need to trim with a dremel the corners of the front arms a touch to miss the front capacitor solder pads on the ESC. They don't actually hit, however its so close their may be a short possible.
  2. Works best to mount the caps under the front arms. See pics below. 
  3. When using a Skitzo or Revolt V2 board there is no plug in the FC. Cut off the plug that comes with the ESC on one end. This will allow you to direct solder them to the FC. The wires are pretty short so lengthen them to provide plenty of slack. This will allow the canopy to be removed for repairs and tinkering later. 
  4. When using the bolt with the Revolt V3 the plug which runs from the ESC to the FC is fairly short. Cut the plug in half at the wires and lengthen them to allow easy removal of the Merica canopy for repairs or tinkering. This step is not required and the two boards will work together without this plug being lengthened, but a longer plug will make it easier on you out in the field.

 

Note: All shipping prices listed on our site are for shipping and handling costs associated with shipping your order. 

Domestic Shipping within the USA

By default we ship via USPS (United States Postal Service) to anywhere in the United States. But, if you are interested in a faster option such as DHL email us at info@catalystmachineworks.com and we can give you instructions on how to get expedited shipping. If you want expedited shipping be sure to email us prior to checking out with your order. We will arrange a shipping quote for you and then give you instructions on how to include this shipping option at checkout. Our USPS shipping option usually takes 2 to 4 days to reach anywhere in the USA. By default this shipping option will NOT require a signature. If you want us to specify signature required please let us know prior to placing your order. 

USPS Insurance 

USPS shipping includes $50 insurance by default. If you require more please let us know prior to placing your order. PLEASE NOTE: We will not be held liable in the event your package or package contents are lost, damaged, or stolen during shipping. When your package leaves our shop and is placed in the hands of the shipping service it is out of our hands. We have no control of what happens to your package after it leaves our doors. Shipping insurance it available to protect you in the event something happens to your package during delivery. We will not reimburse you for lost, damaged, or stolen items. That is what shipping insurance is for. If you would like to add shipping insurance to cover the value of your purchase email us at info@catalystmachineworks.com for more info. 

International Shipping 

We can ship to almost anywhere in the world! Available international shipping options are using United States Postal Service (USPS) or DHL. USPS shipping will be per the flat rate option. This is $28 and can take 6-10 days to reach your country. From here your country postal service will deliver your package and can add additional delivery time. Usually USPS tracking ends once the package reaches your country. Our second shipping option is using DHL. This is considered a premium option and is very fast. Customer service with DHL is the best in the shipping business. Typically DHL only takes 2-3 days to delivery to most locations throughout the world. DHL international shipping always comes with tracking. While this is a more expensive option it is much better than USPS. 

Shipment Handling Time

We require 1 full business day to ship. Additionally, some products come with a longer lead times to ship (see product descriptions). Orders received on Friday may be shipped out the following Monday morning.

Restocking Fee

You can return any item you buy from us for a refund. The item must be completely unopened, brand new, unused, and not damaged. We will wait to receive the product into our stock before issuing a refund. We will also make an assessment of the item, once received. If it is damaged in any way we will not issue a refund and send the item back to you. You have two weeks (from the date order placed) to return any item for a full refund. After the two week grace period we apply a 25% restocking fee. 

Return Policy 

If you believe an item you have purchased is defective our policy is a follows: 

  1. Email us first with your issue. We will instruct you as to whether the item needs to be returned to us. Our email is info@catalystmachineworks.com. Assuming we instruct you to return the item to us please ship it to the address below. 

  2. Once we receive the item our team will access it. 

  3. If we determine the item is indeed defective we will give you a full refund for the price of the item, or replace it. 

  4. If we determine there is nothing wrong with the item we will ship it back to you at your cost (you pay for the return shipping). 

  5. We DO NOT replace broken frame parts, electronics, or accessories you have crashes into the ground, a tree, a fence, a human, or anything else for that matter.