RAZORBACK CANOPY - MERICA FRAMES RAZORBACK CANOPY - MERICA FRAMES Catalyst Machineworks UPDATE 5-28-21: We are now offering these canopies on a 'print to order' basis. Meaning we do not start printing it until you order.  Features:  Large fin keeps props off the ground to allow for turtle mode Sleek and sexy look Nearly indestructible Light weight  Aerodynamic  Available in multiple colors  Same pod fits Merica 3" through Merica 6" Stress relief mounting for U.FL AXI type FPV antenna RC RX antenna mount built in Specs:  Weight: 21.5g Color Options: Black, Red, Blue, White, Green, Yellow, Clear, Pink, Purple, Orange Material: 3D printed TPU Camera min/max camera angle: 25 - 60 degree (DEPENDS ON CAMERA) Supported FPV Cameras: Runcam Micro Eagle, Runcam Micro Swift 2, Foxeer Predator Micro, Foxeer Micro Monster, Runcam Micro Sparrow 2, or similar.  Ideal FPV Camera: This canopy works best with a camera that has a short overall length such as the Runcam Sparrow 2 or Micro Swift. If your camera is very long you will have less crash protection and your available angle adjustment may be limited.  This canopy will not accept the AXI stubby with integrated SMA thread.  Warning: Since this part is 3D printed the quality at the tips of the fin spikes may vary.  Includes:  1 x 3D printed TPU canopy 4 x M3 X 8mm Socket Head Screws          
Catalyst Machineworks

RAZORBACK CANOPY - MERICA FRAMES

Code: CM00940
Add Your Review
RAZORBACK CANOPY - MERICA FRAMES RAZORBACK CANOPY - MERICA FRAMES RAZORBACK CANOPY - MERICA FRAMES RAZORBACK CANOPY - MERICA FRAMES RAZORBACK CANOPY - MERICA FRAMES RAZORBACK CANOPY - MERICA FRAMES RAZORBACK CANOPY - MERICA FRAMES RAZORBACK CANOPY - MERICA FRAMES RAZORBACK CANOPY - MERICA FRAMES RAZORBACK CANOPY - MERICA FRAMES RAZORBACK CANOPY - MERICA FRAMES RAZORBACK CANOPY - MERICA FRAMES RAZORBACK CANOPY - MERICA FRAMES RAZORBACK CANOPY - MERICA FRAMES
RAZORBACK CANOPY - MERICA FRAMES
RAZORBACK CANOPY - MERICA FRAMES RAZORBACK CANOPY - MERICA FRAMES RAZORBACK CANOPY - MERICA FRAMES RAZORBACK CANOPY - MERICA FRAMES RAZORBACK CANOPY - MERICA FRAMES RAZORBACK CANOPY - MERICA FRAMES RAZORBACK CANOPY - MERICA FRAMES RAZORBACK CANOPY - MERICA FRAMES RAZORBACK CANOPY - MERICA FRAMES RAZORBACK CANOPY - MERICA FRAMES RAZORBACK CANOPY - MERICA FRAMES RAZORBACK CANOPY - MERICA FRAMES RAZORBACK CANOPY - MERICA FRAMES RAZORBACK CANOPY - MERICA FRAMES
Add to Wishlist Add to Compare
Category: 3D Printed Parts, Accessories and Upgrades, Best Selling Products, Merica Canopy Choices, Newest Products, Products

UPDATE 5-28-21: We are now offering these canopies on a 'print to order' basis. Meaning we do not start printing it until you order. 

Features: 

  • Large fin keeps props off the ground to allow for turtle mode
  • Sleek and sexy look
  • Nearly indestructible
  • Light weight 
  • Aerodynamic 
  • Available in multiple colors 
  • Same pod fits Merica 3" through Merica 6"
  • Stress relief mounting for U.FL AXI type FPV antenna
  • RC RX antenna mount built in

Specs: 

  • Weight: 21.5g
  • Color Options: Black, Red, Blue, White, Green, Yellow, Clear, Pink, Purple, Orange
  • Material: 3D printed TPU
  • Camera min/max camera angle: 25 - 60 degree (DEPENDS ON CAMERA)
  • Supported FPV Cameras: Runcam Micro Eagle, Runcam Micro Swift 2, Foxeer Predator Micro, Foxeer Micro Monster, Runcam Micro Sparrow 2, or similar. 
  • Ideal FPV Camera: This canopy works best with a camera that has a short overall length such as the Runcam Sparrow 2 or Micro Swift. If your camera is very long you will have less crash protection and your available angle adjustment may be limited. 
  • This canopy will not accept the AXI stubby with integrated SMA thread. 
  • Warning: Since this part is 3D printed the quality at the tips of the fin spikes may vary. 

Includes: 

1 x 3D printed TPU canopy

4 x M3 X 8mm Socket Head Screws

 

 

 

 

 

UPDATE 5-28-21: We are now offering these canopies on a 'print to order' basis. Meaning we do not start printing it until you order. 

Features: 

  • Large fin keeps props off the ground to allow for turtle mode
  • Sleek and sexy look
  • Nearly indestructible
  • Light weight 
  • Aerodynamic 
  • Available in multiple colors 
  • Same pod fits Merica 3" through Merica 6"
  • Stress relief mounting for U.FL AXI type FPV antenna
  • RC RX antenna mount built in

Specs: 

  • Weight: 21.5g
  • Color Options: Black, Red, Blue, White, Green, Yellow, Clear, Pink, Purple, Orange
  • Material: 3D printed TPU
  • Camera min/max camera angle: 25 - 60 degree (DEPENDS ON CAMERA)
  • Supported FPV Cameras: Runcam Micro Eagle, Runcam Micro Swift 2, Foxeer Predator Micro, Foxeer Micro Monster, Runcam Micro Sparrow 2, or similar. 
  • Ideal FPV Camera: This canopy works best with a camera that has a short overall length such as the Runcam Sparrow 2 or Micro Swift. If your camera is very long you will have less crash protection and your available angle adjustment may be limited. 
  • This canopy will not accept the AXI stubby with integrated SMA thread. 
  • Warning: Since this part is 3D printed the quality at the tips of the fin spikes may vary. 

Includes: 

1 x 3D printed TPU canopy

4 x M3 X 8mm Socket Head Screws