Runcam/Foxeer Micro Swift Mount (SuperLight 5/6)
This set of parts is included with the SuperLight Norris Edition as standard on all frames shipped after 10-16-17. For other frames it must be purchased separate and is not included in your frame kit.
This mount will allow the Runcam Swift Micro or Foxeer Micro to fit into our full line of Superlight 5 inch or 6 inch frames. The entire assembly with camera, 3D mount parts, and fasteners weighs around 7g. This is 5g lighter than a stock full sized HS1177. If you like to run a wide angle lens on your full sized HS1177 this micro cam/mount is saving you even more weight! Keep in mind the micro swift already comes with a 2.1mm lens. This product will fit the following frames from our lineup:
- SuperLight 5 Inch (Norris Edition)
- SuperLight 5 Inch (V2)
- SuperLight 5 Inch (V1)
- SuperLight 6 Inch
Mounting Options: (Two options are available for mounts sold after 6-16-17)
Option 1: This option places the camera farther back in the frame to provide better crash protection for the camera, however some of the top plate will be visible in the shot. Click here for option 1 assembly details.
Option 2: This option places the camera farther forward in the frame to provide a completely unobstructed view. Click here for option 2 assembly details.
Includes:
2 X 3D printed standoff friction mounts
1 X 3D printed camera clamp
2 X #2 Phillips head self tapping screw x 3/8" long
1 X M2 X 12mm Screw
1 x M2 Nut
6 x M2 Small Washer (5mm OD)
2 X Spacer 1/4" OD x 1/8" Long White
2 X M2 Socket head screw x 8mm long
Suggestion:
For improved fuselage structural integrity use these side plates.
-SL5 (V2) / SL6 upgraded side plates
-SL5 (Norris Edition) upgraded side plates
This set of parts is included with the SuperLight Norris Edition as standard on all frames shipped after 10-16-17. For other frames it must be purchased separate and is not included in your frame kit.
This mount will allow the Runcam Swift Micro or Foxeer Micro to fit into our full line of Superlight 5 inch or 6 inch frames. The entire assembly with camera, 3D mount parts, and fasteners weighs around 7g. This is 5g lighter than a stock full sized HS1177. If you like to run a wide angle lens on your full sized HS1177 this micro cam/mount is saving you even more weight! Keep in mind the micro swift already comes with a 2.1mm lens. This product will fit the following frames from our lineup:
- SuperLight 5 Inch (Norris Edition)
- SuperLight 5 Inch (V2)
- SuperLight 5 Inch (V1)
- SuperLight 6 Inch
Mounting Options: (Two options are available for mounts sold after 6-16-17)
Option 1: This option places the camera farther back in the frame to provide better crash protection for the camera, however some of the top plate will be visible in the shot. Click here for option 1 assembly details.
Option 2: This option places the camera farther forward in the frame to provide a completely unobstructed view. Click here for option 2 assembly details.
Includes:
2 X 3D printed standoff friction mounts
1 X 3D printed camera clamp
2 X #2 Phillips head self tapping screw x 3/8" long
1 X M2 X 12mm Screw
1 x M2 Nut
6 x M2 Small Washer (5mm OD)
2 X Spacer 1/4" OD x 1/8" Long White
2 X M2 Socket head screw x 8mm long
Suggestion:
For improved fuselage structural integrity use these side plates.
-SL5 (V2) / SL6 upgraded side plates
-SL5 (Norris Edition) upgraded side plates
