Shocker 7" (Long Range / Freestyle) Shocker 7" (Long Range / Freestyle) Catalyst Machineworks   This frame fits the new DJI 03 Air Unit! This is the 7" version of our popular Shocker Tank 5" frame. This new version keeps the same design philosophy intact but it is just, LARGER. Intended purpose is long range setups or freestyle. This frame will accept any of the popular HD video systems such as DJI, Caddx, Walksnail, HD Zero, etc. It will also accept analog FPV setups. It comes standard with a dual SMA FPV antenna mount for running u.fl or mmcx to SMA adapters and long range SMA style antennas. You can also use just one side of the mount if you prefer to run one FPV antenna, or if your VTX requires it. Provisions for mounting GPS units and crossfire (or similar) setups are included as standard in the kit. Both front and rear arm braces are included as well. Many customers have said the Shocker Tank 5" design lends itself to a big 7" brother and requested we design one. Well we listened!  Features:  Approx 215g weight (with hardware)  Crazy tough frame  Designed for aggressive freestyle / long rang flights 'Underslung' component mounting for ideal COG  Easy access to components for field repairs Quick swap arm design Top plate features countersunk screw holes to provide a flat lipo mounting surface Designed to fit most HD or analog FPV video systems on the market Lots of available accessories  All 3D printed STL's available for download Lots of deck space for large lipos (148mm of space) Plenty of room for 7.1" props No props in view on FPV camera feed  2 velcro straps hold the lipo firmly in place Superior FPV camera protection  Wide range of FPV camera adjustment  Two screw arm removal. Remove arms be loosening one screw and removing the other No arm "slop" Provisions for crossfire gear  Superior Catalyst Machineworks design Superior Catalyst Machineworks customer support Electronics sold separate  GoPro camera mounts sold separate  Specs  7" Weight: 215g (appox w/ hardware)  Carbon fiber: Twill Weave 3K Matte Standoff color: Matte black CF Arms: 6mm thick x 12mm wide  Top CF plate: 3mm Front cage plates: 3mm Rear cage plates: 3mm Middle plates: 2.5mm Front brace: 5mm Cross brace: 3mm Rear brace: 4mm Frame type: 'dead cat' quad Frame size: 318mm FPV camera angle range: 0 - 70 degrees Motor pad mounting holes: M3 screws on 16mm or 19mm mounting circles Lipos supported: 4s, 5s, 6s  Available lipo mounting space: 148mm (length) Lipos suggested: 3000mah - 3500mah (4s - 6s) Lipo mounting position: Top  Prop size: 7.1 inch (max)  Accepted ESC: 4-in-1 full size or micro  Accepted FC: Full size or micro  Supports "Mini" FPV Cameras: (20mm width to fit camera) Supports "Micro" FPV Cameras: (Use washer on either side of 19mm camera) Designed to fit most HD or analog FPV video systems on the market: Caddx, HD Zero, DJI, Walksnail, analog VTX to FPV camera cable must be a minimum of 120mm SPARE PARTS  ACCESSORIES BILL OF MATERIAL (PARTS LIST) FRAME BUILD VIDEO

Shocker 7" (Long Range / Freestyle)

Code: CM02406
$119.99
In Stock
Add to Wishlist Add to Compare

 

This frame fits the new DJI 03 Air Unit!

This is the 7" version of our popular Shocker Tank 5" frame. This new version keeps the same design philosophy intact but it is just, LARGER. Intended purpose is long range setups or freestyle. This frame will accept any of the popular HD video systems such as DJI, Caddx, Walksnail, HD Zero, etc. It will also accept analog FPV setups. It comes standard with a dual SMA FPV antenna mount for running u.fl or mmcx to SMA adapters and long range SMA style antennas. You can also use just one side of the mount if you prefer to run one FPV antenna, or if your VTX requires it. Provisions for mounting GPS units and crossfire (or similar) setups are included as standard in the kit. Both front and rear arm braces are included as well. Many customers have said the Shocker Tank 5" design lends itself to a big 7" brother and requested we design one. Well we listened! 

Features: 

  • Approx 215g weight (with hardware) 
  • Crazy tough frame 
  • Designed for aggressive freestyle / long rang flights
  • 'Underslung' component mounting for ideal COG 
  • Easy access to components for field repairs
  • Quick swap arm design
  • Top plate features countersunk screw holes to provide a flat lipo mounting surface
  • Designed to fit most HD or analog FPV video systems on the market
  • Lots of available accessories 
  • All 3D printed STL's available for download
  • Lots of deck space for large lipos (148mm of space)
  • Plenty of room for 7.1" props
  • No props in view on FPV camera feed 
  • 2 velcro straps hold the lipo firmly in place
  • Superior FPV camera protection 
  • Wide range of FPV camera adjustment 
  • Two screw arm removal. Remove arms be loosening one screw and removing the other
  • No arm "slop"
  • Provisions for crossfire gear 
  • Superior Catalyst Machineworks design
  • Superior Catalyst Machineworks customer support
  • Electronics sold separate 
  • GoPro camera mounts sold separate 

Specs 

  • 7" Weight: 215g (appox w/ hardware) 
  • Carbon fiber: Twill Weave 3K Matte
  • Standoff color: Matte black
  • CF Arms: 6mm thick x 12mm wide 
  • Top CF plate: 3mm
  • Front cage plates: 3mm
  • Rear cage plates: 3mm
  • Middle plates: 2.5mm
  • Front brace: 5mm
  • Cross brace: 3mm
  • Rear brace: 4mm
  • Frame type: 'dead cat' quad
  • Frame size: 318mm
  • FPV camera angle range: 0 - 70 degrees
  • Motor pad mounting holes: M3 screws on 16mm or 19mm mounting circles
  • Lipos supported: 4s, 5s, 6s 
  • Available lipo mounting space: 148mm (length)
  • Lipos suggested: 3000mah - 3500mah (4s - 6s)
  • Lipo mounting position: Top 
  • Prop size: 7.1 inch (max) 
  • Accepted ESC: 4-in-1 full size or micro 
  • Accepted FC: Full size or micro 
  • Supports "Mini" FPV Cameras: (20mm width to fit camera)
  • Supports "Micro" FPV Cameras: (Use washer on either side of 19mm camera)
  • Designed to fit most HD or analog FPV video systems on the market: Caddx, HD Zero, DJI, Walksnail, analog
  • VTX to FPV camera cable must be a minimum of 120mm

SPARE PARTS 

ACCESSORIES

BILL OF MATERIAL (PARTS LIST)

FRAME BUILD VIDEO


 

This frame fits the new DJI 03 Air Unit!

This is the 7" version of our popular Shocker Tank 5" frame. This new version keeps the same design philosophy intact but it is just, LARGER. Intended purpose is long range setups or freestyle. This frame will accept any of the popular HD video systems such as DJI, Caddx, Walksnail, HD Zero, etc. It will also accept analog FPV setups. It comes standard with a dual SMA FPV antenna mount for running u.fl or mmcx to SMA adapters and long range SMA style antennas. You can also use just one side of the mount if you prefer to run one FPV antenna, or if your VTX requires it. Provisions for mounting GPS units and crossfire (or similar) setups are included as standard in the kit. Both front and rear arm braces are included as well. Many customers have said the Shocker Tank 5" design lends itself to a big 7" brother and requested we design one. Well we listened! 

Features: 

  • Approx 215g weight (with hardware) 
  • Crazy tough frame 
  • Designed for aggressive freestyle / long rang flights
  • 'Underslung' component mounting for ideal COG 
  • Easy access to components for field repairs
  • Quick swap arm design
  • Top plate features countersunk screw holes to provide a flat lipo mounting surface
  • Designed to fit most HD or analog FPV video systems on the market
  • Lots of available accessories 
  • All 3D printed STL's available for download
  • Lots of deck space for large lipos (148mm of space)
  • Plenty of room for 7.1" props
  • No props in view on FPV camera feed 
  • 2 velcro straps hold the lipo firmly in place
  • Superior FPV camera protection 
  • Wide range of FPV camera adjustment 
  • Two screw arm removal. Remove arms be loosening one screw and removing the other
  • No arm "slop"
  • Provisions for crossfire gear 
  • Superior Catalyst Machineworks design
  • Superior Catalyst Machineworks customer support
  • Electronics sold separate 
  • GoPro camera mounts sold separate 

Specs 

  • 7" Weight: 215g (appox w/ hardware) 
  • Carbon fiber: Twill Weave 3K Matte
  • Standoff color: Matte black
  • CF Arms: 6mm thick x 12mm wide 
  • Top CF plate: 3mm
  • Front cage plates: 3mm
  • Rear cage plates: 3mm
  • Middle plates: 2.5mm
  • Front brace: 5mm
  • Cross brace: 3mm
  • Rear brace: 4mm
  • Frame type: 'dead cat' quad
  • Frame size: 318mm
  • FPV camera angle range: 0 - 70 degrees
  • Motor pad mounting holes: M3 screws on 16mm or 19mm mounting circles
  • Lipos supported: 4s, 5s, 6s 
  • Available lipo mounting space: 148mm (length)
  • Lipos suggested: 3000mah - 3500mah (4s - 6s)
  • Lipo mounting position: Top 
  • Prop size: 7.1 inch (max) 
  • Accepted ESC: 4-in-1 full size or micro 
  • Accepted FC: Full size or micro 
  • Supports "Mini" FPV Cameras: (20mm width to fit camera)
  • Supports "Micro" FPV Cameras: (Use washer on either side of 19mm camera)
  • Designed to fit most HD or analog FPV video systems on the market: Caddx, HD Zero, DJI, Walksnail, analog
  • VTX to FPV camera cable must be a minimum of 120mm

SPARE PARTS 

ACCESSORIES

BILL OF MATERIAL (PARTS LIST)

FRAME BUILD VIDEO