ALL SIZES OF THE SHOCKER ULTRALIGHT ARE CURRENTLY ON BACKORDER.

This 3" version of our world famous Shocker 4" / 5" doesn't need much introduction. Yes it is smaller but please do not call it "cute". It gets angry when people call it cute. We have taken this fantastic example of FPV goodness and performed the following alterations: 

• Reduced arm length to provide the smallest package possible for 3" props while not going so small that prop-to-lipo clearance becomes an issue. This arm reduction may sound trivial but frame inertia has been drastically reduced increasing both agility and crash durability

• The tabs that hold the front camera cage plates to the fuselage top plate have been beefed up to aid in crash durability

• The rear cage plate geometry has been altered to allow for larger electronics to be installed such as some of the upcoming HD VTX options from Shark Byte (aka Divimath) 

• Extra M2 holes have been added to the fuselage top plate and crossbrace to facilitate installation of the new "whoop style" 25.5 x 25.5mm AIO boards 

• If you own a Shocker 4" you CAN convert it to this 3" by changing out the arms and front brace. You have the option of also replacing the rear cage plates and crossbrace but only if you require the features our current design alterations to those parts provide (see above)

Features: 

• Light weight frame
• Designed for freestyle fun or cruising long range flights 
• Very tough for it's weight
• Easy access to components for field repairs
• Quick swap arm design
• Designed to fit Caddx / Runcam HD FPV systems, some of the Shark Byte HD FPV systems, or analog FPV systems
• Lots of available accessories 
• Lots of deck space for large lipos
• 2 velcro straps hold the lipo firmly in place
• Superior FPV camera protection 
• Wide range of FPV camera adjustment 
• Two screw arm removal. Remove arms be loosening one screw and removing the other
• No arm "slop"
• Industry leading camera protection (FPV)
• Provisions for crossfire gear 
• Superior Catalyst Machineworks design
• Superior Catalyst Machineworks customer support
• Electronics sold separate 
• Belly skids sold separate 

Specs 

• THIS FRAME INCLUDES BLACK ALUMINUM SCREWS AND SILVER STEEL ARM SCREWS. AN OPTIONAL ALL ALUMINUM HARDWARE UPGRADE IS AVAILABLE IN RED, BLUE, OR PURPLE AS AN OPTIONAL ACCESSORY. 
• 3" Weight: 42.7g (optional aluminum arm screws), 45.7g (standard steel arm screws)
• 3.5" Weight: 43.7g (optional aluminum arm screws), 46.7g (standard steel arm screws)
• Carbon fiber: Twill Weave 3K Matte
• Standoff color: Matte black
• CF Arms: 3mm thick (3" version)
• Top CF plate: 2mm
• Side CF cage plates: 1.5mm
• Front brace: 2mm
• Optional rear brace (sold separate): 2mm
• Frame type: 'dead cat' quad
• 3" Frame size: 143mm
• 3.5" Frame size: 155mm
• FPV camera angle range: 0 - 70 degrees
• Motors supported: Must have M2 screw on 12mm diameter bolt circle
• Lipos voltage suggested: 3s, 4s, 6s 
• Lipos size suggested: 650mah - 1050mah 3s, 650mah - 850mah 4s, 650mah - 850mah 6s (See lipo fit sizing graphic below. This graphic is considering 3"/ 77mm props) 
• Lipo mounting position: Top 
• 3" Prop size: Up to 3.1" 
• 3.5" Prop size: 3.5" 
• Accepted ESC: 4-in-1 micro design with 20mm x 20mm M3 or M2 mounting holes
• Accepted FC: micro 20mm x 20mm M3 or M2 mounting holes 
• Accepts 25.5mm x 25.5mm AIO "Whoop Boards"
• Supports "Mini" FPV Cameras 
• Supports "Micro" FPV Cameras

SPARE PARTS 

ACCESSORIES

BILL OF MATERIAL (COMING SOON...)

FRAME BUILD VIDEO