WhoopMaster 6" PRO (CAMERA MOUNT SOLD SEPARATE) WhoopMaster 6" PRO (CAMERA MOUNT SOLD SEPARATE) Catalyst Machineworks UPDATE 2-27-22: THIS FRAME IS OPEN FOR PREORDER. IF YOU WOULD LIKE A CUSTOM BNF PLEASE EMAIL INFO@CATALYSTMACHINEWORKS.COM. THE PICTURES ON THIS PAGE ARE OF THE PROTOTYPE BIRD WHICH IS NOT USING OUR CATALYST CARBON FIBER MATERIAL. FOR PRODUCTION WE WILL BE USING THE SAME BEAUTIFUL SATIN FINISH MATTE CARBON AS THE REST OF OUR OFFERINGS.  The FPV community has been begging us to make available a PRO level rig in DIY form. Meet the WhoopMaster 6" PRO. The big brother of our Whoopmaster 4". This is our first professional cinema FPV machine offered as either a BNF or frame kit. It uses many of the same design principles utilized in of our MoneyShot FPV drone lineup. It can be configured to carry a Cinema camera (Red Komodo, Panasonic BGH1, Naked Magic Pocket cam, etc...) or GoPro setup (dual or single). This machine can be configured as either "all-weather" or "standard". The all weather upgrade includes a large aluminum heat sink built into the top plate. Electronics that produce heat (ESC, VTX, camera UBEC) are mounted to this heat sink which serves to pull heat out of the watertight enclosure. A large TPU skirt surrounds your electronics and keeps them completely dry during service in rain or snow. Fit up to 6.1" props giving you plenty of throttle headroom for your whooptastic adventures. Unlike some other pro cinewhoops out there, the flight pack is mounted on bottom. This allows for lots of room to run huge lipos (up to 5100mah 6s) and get lots of flight time. The cinema camera antivibration mount (sold separate) places your camera in the top-center of the machine allowing for room to mount literally anything within the payload limit (3.5 LBS). The frame comes with 2 panel mount XT60's. One on bottom for the main flight pack and one on the top plate for powering your cinema camera from a UBEC. The props are surrounded by robust carbon fiber caged guards designed to take heavy impacts. You can add optional soft TPU bumpers for extra protection. WM6" Intended Use:  This craft flies like a giant "Whoop". It is intended for smooth and moderate to slow cruising and close proximity flying. Intended environment is indoor or outdoor with low to moderate winds. Our testing has shown that high winds may affect flight. If you are looking for a whoop that has serious power, can haul ass, and perform acro please look into our WhoopLifter 7" Y6.  Frame Features:  Professional level cinewhoop with design features from our MoneyShot line of drones Fits up to 6.1" props to carry heavy payloads Run any cinema camera within the 3.5LB payload limit  Option to run "naked BMPCC4K" (mount sold separate) Props surrounded by robust carbon cage prop guards Professional level "alpha gel" cinema camera antivibration camera mount (sold separate)  Can be configured to run single or dual GoPros  Near waterproof "all weather" option available  Plenty of space on bottom to run BIG lipos (up to 5100mah 6s) Optional soft prop guard bumpers available  Easy to build Easy to maintain  Super rigid frame structure helping with "tunability"  Build with HD or analog FPV Two integrated panel mount XT60 connectors  Provisions for running INAV (RTH and position hold features) Integrated holes for dual SMA FPV antennas or single (antenna sold separate) Lots of 3D printed accessories available to facilitate many different electronics combos  Industry leading carbon fiber Available as a frame kit or full custom BNF (email info@catalystmachineworks.com to get your build started!)  We do not make available STL's for our pro cinema products   Frame Specs: Standard frame weight: 399g All weather frame weight: 460g Alpha gel camera mount weight: 200g Frame Size: 260mm  Payload limit on 6s, 2808 motor, 6.1" prop: approximately 3.5LB (1580g) Exterior dimensions: 385mm wide x 365mm long x 90mm tall (feet included) Prop Size: up to 6.1"  Carbon Fiber: Twill Weave 3K Matte Top plate carbon thickness: 3mm Bottom plate carbon thickness: 2mm Bottom cover plate carbon thickness: 1.5mm Heat sink thickness carbon thickness: 1.5mm Bottom prop guard carbon thickness: 2.5mm Top prop guard carbon thickness: 2.5mm Rear joint carbon thickness: 2mm Front joint carbon thickness: 2mm FPV Camera Angle Range: 0 - 65 degrees Motors supported: 2806.5 (minimum) - 3008 (maximum) stator cannot be taller than 8mm! For light weight rigs use 2806.5. For heavy lift use 2808 or 3008.  Lipos supported: 6s (up to 5100mah 6s) Lipo mounting position: Bottom Fastener Material: High quality steel and 7075 aluminum Standoff material: Aluminum  Accepted ESC/FC: Full size 30.5mm x 30.5mm Standard frame motor pad mounting holes: M3 screws on 16mm/19mm circle  Supported FPV cameras: Micro or Mini (19mm or 20mm wide) Supported FPV video transmitters: Vista, Air Unit, or Analog (these go by a number of different names) Accepts Fat Shark 'Shark Byte' HD FPV systems Cinema camera power: Use included panel mount XT60 paired with Ubec of your choosing Cinema cameras supported (standard Alpha gel camera mount): Red Komodo, Sony FX6, Panasonic BGH1, Black Magic Pocket Cam, or similar  Cinema camera supported (naked BMPCC4K mount: naked BMPCC4K camera (bolt pattern 124mm x 90mm) BILL OF MATERIAL (PARTS LIST) ACCESSORIES  SPARE PARTS (coming soon) FRAME ASSEMBLY VIDEO                          

WhoopMaster 6" PRO (CAMERA MOUNT SOLD SEPARATE)

Code: CM02109

UPDATE 2-27-22: THIS FRAME IS OPEN FOR PREORDER. IF YOU WOULD LIKE A CUSTOM BNF PLEASE EMAIL INFO@CATALYSTMACHINEWORKS.COM. THE PICTURES ON THIS PAGE ARE OF THE PROTOTYPE BIRD WHICH IS NOT USING OUR CATALYST CARBON FIBER MATERIAL. FOR PRODUCTION WE WILL BE USING THE SAME BEAUTIFUL SATIN FINISH MATTE CARBON AS THE REST OF OUR OFFERINGS. 


The FPV community has been begging us to make available a PRO level rig in DIY form. Meet the WhoopMaster 6" PRO. The big brother of our Whoopmaster 4". This is our first professional cinema FPV machine offered as either a BNF or frame kit. It uses many of the same design principles utilized in of our MoneyShot FPV drone lineup. It can be configured to carry a Cinema camera (Red Komodo, Panasonic BGH1, Naked Magic Pocket cam, etc...) or GoPro setup (dual or single). This machine can be configured as either "all-weather" or "standard". The all weather upgrade includes a large aluminum heat sink built into the top plate. Electronics that produce heat (ESC, VTX, camera UBEC) are mounted to this heat sink which serves to pull heat out of the watertight enclosure. A large TPU skirt surrounds your electronics and keeps them completely dry during service in rain or snow. Fit up to 6.1" props giving you plenty of throttle headroom for your whooptastic adventures. Unlike some other pro cinewhoops out there, the flight pack is mounted on bottom. This allows for lots of room to run huge lipos (up to 5100mah 6s) and get lots of flight time. The cinema camera antivibration mount (sold separate) places your camera in the top-center of the machine allowing for room to mount literally anything within the payload limit (3.5 LBS). The frame comes with 2 panel mount XT60's. One on bottom for the main flight pack and one on the top plate for powering your cinema camera from a UBEC. The props are surrounded by robust carbon fiber caged guards designed to take heavy impacts. You can add optional soft TPU bumpers for extra protection.

WM6" Intended Use: 

This craft flies like a giant "Whoop". It is intended for smooth and moderate to slow cruising and close proximity flying. Intended environment is indoor or outdoor with low to moderate winds. Our testing has shown that high winds may affect flight. If you are looking for a whoop that has serious power, can haul ass, and perform acro please look into our WhoopLifter 7" Y6

Frame Features: 

  • Professional level cinewhoop with design features from our MoneyShot line of drones
  • Fits up to 6.1" props to carry heavy payloads
  • Run any cinema camera within the 3.5LB payload limit 
  • Option to run "naked BMPCC4K" (mount sold separate)
  • Props surrounded by robust carbon cage prop guards
  • Professional level "alpha gel" cinema camera antivibration camera mount (sold separate) 
  • Can be configured to run single or dual GoPros 
  • Near waterproof "all weather" option available 
  • Plenty of space on bottom to run BIG lipos (up to 5100mah 6s)
  • Optional soft prop guard bumpers available 
  • Easy to build
  • Easy to maintain 
  • Super rigid frame structure helping with "tunability" 
  • Build with HD or analog FPV
  • Two integrated panel mount XT60 connectors 
  • Provisions for running INAV (RTH and position hold features)
  • Integrated holes for dual SMA FPV antennas or single (antenna sold separate)
  • Lots of 3D printed accessories available to facilitate many different electronics combos 
  • Industry leading carbon fiber
  • Available as a frame kit or full custom BNF (email info@catalystmachineworks.com to get your build started!) 
  • We do not make available STL's for our pro cinema products

 

Frame Specs:

  • Standard frame weight: 399g
  • All weather frame weight: 460g
  • Alpha gel camera mount weight: 200g
  • Frame Size: 260mm 
  • Payload limit on 6s, 2808 motor, 6.1" prop: approximately 3.5LB (1580g)
  • Exterior dimensions: 385mm wide x 365mm long x 90mm tall (feet included)
  • Prop Size: up to 6.1" 
  • Carbon Fiber: Twill Weave 3K Matte
  • Top plate carbon thickness: 3mm
  • Bottom plate carbon thickness: 2mm
  • Bottom cover plate carbon thickness: 1.5mm
  • Heat sink thickness carbon thickness: 1.5mm
  • Bottom prop guard carbon thickness: 2.5mm
  • Top prop guard carbon thickness: 2.5mm
  • Rear joint carbon thickness: 2mm
  • Front joint carbon thickness: 2mm
  • FPV Camera Angle Range: 0 - 65 degrees
  • Motors supported: 2806.5 (minimum) - 3008 (maximum) stator cannot be taller than 8mm! For light weight rigs use 2806.5. For heavy lift use 2808 or 3008. 
  • Lipos supported: 6s (up to 5100mah 6s)
  • Lipo mounting position: Bottom
  • Fastener Material: High quality steel and 7075 aluminum
  • Standoff material: Aluminum 
  • Accepted ESC/FC: Full size 30.5mm x 30.5mm
  • Standard frame motor pad mounting holes: M3 screws on 16mm/19mm circle 
  • Supported FPV cameras: Micro or Mini (19mm or 20mm wide)
  • Supported FPV video transmitters: Vista, Air Unit, or Analog (these go by a number of different names)
  • Accepts Fat Shark 'Shark Byte' HD FPV systems
  • Cinema camera power: Use included panel mount XT60 paired with Ubec of your choosing
  • Cinema cameras supported (standard Alpha gel camera mount): Red Komodo, Sony FX6, Panasonic BGH1, Black Magic Pocket Cam, or similar 
  • Cinema camera supported (naked BMPCC4K mount: naked BMPCC4K camera (bolt pattern 124mm x 90mm)

BILL OF MATERIAL (PARTS LIST)

ACCESSORIES 

SPARE PARTS (coming soon)

FRAME ASSEMBLY VIDEO

 

 

 

 

 

 

 



 









 

 

 

 

 


UPDATE 2-27-22: THIS FRAME IS OPEN FOR PREORDER. IF YOU WOULD LIKE A CUSTOM BNF PLEASE EMAIL INFO@CATALYSTMACHINEWORKS.COM. THE PICTURES ON THIS PAGE ARE OF THE PROTOTYPE BIRD WHICH IS NOT USING OUR CATALYST CARBON FIBER MATERIAL. FOR PRODUCTION WE WILL BE USING THE SAME BEAUTIFUL SATIN FINISH MATTE CARBON AS THE REST OF OUR OFFERINGS. 


The FPV community has been begging us to make available a PRO level rig in DIY form. Meet the WhoopMaster 6" PRO. The big brother of our Whoopmaster 4". This is our first professional cinema FPV machine offered as either a BNF or frame kit. It uses many of the same design principles utilized in of our MoneyShot FPV drone lineup. It can be configured to carry a Cinema camera (Red Komodo, Panasonic BGH1, Naked Magic Pocket cam, etc...) or GoPro setup (dual or single). This machine can be configured as either "all-weather" or "standard". The all weather upgrade includes a large aluminum heat sink built into the top plate. Electronics that produce heat (ESC, VTX, camera UBEC) are mounted to this heat sink which serves to pull heat out of the watertight enclosure. A large TPU skirt surrounds your electronics and keeps them completely dry during service in rain or snow. Fit up to 6.1" props giving you plenty of throttle headroom for your whooptastic adventures. Unlike some other pro cinewhoops out there, the flight pack is mounted on bottom. This allows for lots of room to run huge lipos (up to 5100mah 6s) and get lots of flight time. The cinema camera antivibration mount (sold separate) places your camera in the top-center of the machine allowing for room to mount literally anything within the payload limit (3.5 LBS). The frame comes with 2 panel mount XT60's. One on bottom for the main flight pack and one on the top plate for powering your cinema camera from a UBEC. The props are surrounded by robust carbon fiber caged guards designed to take heavy impacts. You can add optional soft TPU bumpers for extra protection.

WM6" Intended Use: 

This craft flies like a giant "Whoop". It is intended for smooth and moderate to slow cruising and close proximity flying. Intended environment is indoor or outdoor with low to moderate winds. Our testing has shown that high winds may affect flight. If you are looking for a whoop that has serious power, can haul ass, and perform acro please look into our WhoopLifter 7" Y6

Frame Features: 

  • Professional level cinewhoop with design features from our MoneyShot line of drones
  • Fits up to 6.1" props to carry heavy payloads
  • Run any cinema camera within the 3.5LB payload limit 
  • Option to run "naked BMPCC4K" (mount sold separate)
  • Props surrounded by robust carbon cage prop guards
  • Professional level "alpha gel" cinema camera antivibration camera mount (sold separate) 
  • Can be configured to run single or dual GoPros 
  • Near waterproof "all weather" option available 
  • Plenty of space on bottom to run BIG lipos (up to 5100mah 6s)
  • Optional soft prop guard bumpers available 
  • Easy to build
  • Easy to maintain 
  • Super rigid frame structure helping with "tunability" 
  • Build with HD or analog FPV
  • Two integrated panel mount XT60 connectors 
  • Provisions for running INAV (RTH and position hold features)
  • Integrated holes for dual SMA FPV antennas or single (antenna sold separate)
  • Lots of 3D printed accessories available to facilitate many different electronics combos 
  • Industry leading carbon fiber
  • Available as a frame kit or full custom BNF (email info@catalystmachineworks.com to get your build started!) 
  • We do not make available STL's for our pro cinema products

 

Frame Specs:

  • Standard frame weight: 399g
  • All weather frame weight: 460g
  • Alpha gel camera mount weight: 200g
  • Frame Size: 260mm 
  • Payload limit on 6s, 2808 motor, 6.1" prop: approximately 3.5LB (1580g)
  • Exterior dimensions: 385mm wide x 365mm long x 90mm tall (feet included)
  • Prop Size: up to 6.1" 
  • Carbon Fiber: Twill Weave 3K Matte
  • Top plate carbon thickness: 3mm
  • Bottom plate carbon thickness: 2mm
  • Bottom cover plate carbon thickness: 1.5mm
  • Heat sink thickness carbon thickness: 1.5mm
  • Bottom prop guard carbon thickness: 2.5mm
  • Top prop guard carbon thickness: 2.5mm
  • Rear joint carbon thickness: 2mm
  • Front joint carbon thickness: 2mm
  • FPV Camera Angle Range: 0 - 65 degrees
  • Motors supported: 2806.5 (minimum) - 3008 (maximum) stator cannot be taller than 8mm! For light weight rigs use 2806.5. For heavy lift use 2808 or 3008. 
  • Lipos supported: 6s (up to 5100mah 6s)
  • Lipo mounting position: Bottom
  • Fastener Material: High quality steel and 7075 aluminum
  • Standoff material: Aluminum 
  • Accepted ESC/FC: Full size 30.5mm x 30.5mm
  • Standard frame motor pad mounting holes: M3 screws on 16mm/19mm circle 
  • Supported FPV cameras: Micro or Mini (19mm or 20mm wide)
  • Supported FPV video transmitters: Vista, Air Unit, or Analog (these go by a number of different names)
  • Accepts Fat Shark 'Shark Byte' HD FPV systems
  • Cinema camera power: Use included panel mount XT60 paired with Ubec of your choosing
  • Cinema cameras supported (standard Alpha gel camera mount): Red Komodo, Sony FX6, Panasonic BGH1, Black Magic Pocket Cam, or similar 
  • Cinema camera supported (naked BMPCC4K mount: naked BMPCC4K camera (bolt pattern 124mm x 90mm)

BILL OF MATERIAL (PARTS LIST)

ACCESSORIES 

SPARE PARTS (coming soon)

FRAME ASSEMBLY VIDEO