Tasmanian Frame (Version 2) - Xclass / Beast Class
Catalyst Machineworks LLC Safety Agreement
This new frame began with the fundamental design elements that made the Tasmanian V1 a leader in the market for those looking for the best track performance available. The Tasmanian V2 brings that performance to the next level. Weight had been reduced drastically with a bare frame weight of only a tick over 600 grams for the Xclass variant! If you decide to run beast class (480mm) weight is reduced even further to 532 grams. Aerodynamics have been improved and a slew of cool new features have been added. If you want the single best performing rig on the market today, this is it. Simple as that. The Tasmanian V2 is available in two flavors. An Octo frame configuration designed to swing 9" props x 8. Or a more standard Quad frame configuration designed for 4 large Xclass motors spinning 13" props.
Specs and Features:
- Industry leading track performance
- Available in quad or octo configuration
- Lowest weight in class
- 600g approx - Xclass (800mm)
- 532g approx - Beast Class (480mm)
- Accepts the DJI FPV System with optional mount (COMING SOON)
- Industry leading frame rigidity
- Innovative motor mounting system
- High spectator visibility
- Bottom mount lipo system
- Easy electronics access hole
- Provisions for crossfire gear (SOLD SEPARATE)
- Optional APD ESC mounts (SOLD SEPARATE AND COMING SOON)
- Xclass frame size: 800mm
- Beast frame size: 480mm
- Quad Prop size: 13 inch recommended
- Octo Prop size: 9 inch maximum
- Carbon fiber type: Twill Weave 3K Matte
- Arm material: 20mm tall x 20mm wide x 1mm thick carbon fiber
- Top plate: 4mm
- Bottom plate: 4mm
- Standoff size: M3
- Frame type: True X
- FPV camera angle range: 0 - 75 degrees
- Quad motor mounting: M4 screws on 30mm bolt circle
- Octo motor mounting: M3 screws on 19mm bolt circle
- Lipos supported: 6s - 12s
- Lipo mounting position: Below the frame
- Fastener material: High strength steel
- Fastener color: Silver
- Supported FPV Cameras: Any full sized "HS1177" style FPV camera W/ mounting bracket. Mini or micro cameras will fit but you must use an adapter.
- Supported FC: Standard 30.5mm x 30.5mm mounting
- Supported VTX Size: Everything
- Supported FPV Antenna: Everything
- Supported receiver: Everything
- Suggested ESC: Advanced Power Drives
- Supported PDB: Standard 30.5mm x 30.5mm mounting
- HD camera mount options: Session or Standard Gopro
- HD camera mount angle range: 20 - 50 degrees
TASMANIAN V2 ACCESSORIES
TASMANIAN V2 SPARE PARTS (COMING SOON)
TASMANIAN V2 BILL OF MATERIAL (COMING SOON)
TASMANIAN V2 FRAME ASSEMBLY VIDEO (COMING SOON)
Catalyst Machineworks LLC Safety Agreement
This new frame began with the fundamental design elements that made the Tasmanian V1 a leader in the market for those looking for the best track performance available. The Tasmanian V2 brings that performance to the next level. Weight had been reduced drastically with a bare frame weight of only a tick over 600 grams for the Xclass variant! If you decide to run beast class (480mm) weight is reduced even further to 532 grams. Aerodynamics have been improved and a slew of cool new features have been added. If you want the single best performing rig on the market today, this is it. Simple as that. The Tasmanian V2 is available in two flavors. An Octo frame configuration designed to swing 9" props x 8. Or a more standard Quad frame configuration designed for 4 large Xclass motors spinning 13" props.
Specs and Features:
- Industry leading track performance
- Available in quad or octo configuration
- Lowest weight in class
- 600g approx - Xclass (800mm)
- 532g approx - Beast Class (480mm)
- Accepts the DJI FPV System with optional mount (COMING SOON)
- Industry leading frame rigidity
- Innovative motor mounting system
- High spectator visibility
- Bottom mount lipo system
- Easy electronics access hole
- Provisions for crossfire gear (SOLD SEPARATE)
- Optional APD ESC mounts (SOLD SEPARATE AND COMING SOON)
- Xclass frame size: 800mm
- Beast frame size: 480mm
- Quad Prop size: 13 inch recommended
- Octo Prop size: 9 inch maximum
- Carbon fiber type: Twill Weave 3K Matte
- Arm material: 20mm tall x 20mm wide x 1mm thick carbon fiber
- Top plate: 4mm
- Bottom plate: 4mm
- Standoff size: M3
- Frame type: True X
- FPV camera angle range: 0 - 75 degrees
- Quad motor mounting: M4 screws on 30mm bolt circle
- Octo motor mounting: M3 screws on 19mm bolt circle
- Lipos supported: 6s - 12s
- Lipo mounting position: Below the frame
- Fastener material: High strength steel
- Fastener color: Silver
- Supported FPV Cameras: Any full sized "HS1177" style FPV camera W/ mounting bracket. Mini or micro cameras will fit but you must use an adapter.
- Supported FC: Standard 30.5mm x 30.5mm mounting
- Supported VTX Size: Everything
- Supported FPV Antenna: Everything
- Supported receiver: Everything
- Suggested ESC: Advanced Power Drives
- Supported PDB: Standard 30.5mm x 30.5mm mounting
- HD camera mount options: Session or Standard Gopro
- HD camera mount angle range: 20 - 50 degrees
TASMANIAN V2 ACCESSORIES
TASMANIAN V2 SPARE PARTS (COMING SOON)
TASMANIAN V2 BILL OF MATERIAL (COMING SOON)
TASMANIAN V2 FRAME ASSEMBLY VIDEO (COMING SOON)
