Red Cannonball 2406 Motor (Version 2) Red Cannonball 2406 Motor (Version 2) Catalyst Machineworks This is the new improved version of the motor with a brand new bell design. With roughly 3% more stator volume than a 2207, this is the motor for those that want the big thrust of 2207 motor but without sacrificing the low- mid range control due to lack of torque on a 22 size stator. This opens a big range of possibilities in its application for bigger propellers and heavier quads carrying a go pro as well as racers seeking the ultimate control without sacrificing top end power on the track.  2020kv is suggested for 6s voltage. 2330kv is suggested for 5s voltage.  N52H arc magnets 14mm titanium alloy hollow shaft Stator: 0.15mm Nippon steel silicon steel Bearings: Japan NMB 9x4x4mm Base casing: Al 7075 Bell cap: Al 7075 Shaft Diameter: M5 Bolt pattern: 16x16 Prop grip texture on bell top Magnet slip proof lip Weight: 32.5 grams with 100mm of wire Weight: 30.5 grams with short wire Two KV options (2020kv for 6s, 2330kv for 5s)        
Catalyst Machineworks

Red Cannonball 2406 Motor (Version 2)

Code: CM01442-1
Add Your Review
Red Cannonball 2406 Motor (Version 2) Red Cannonball 2406 Motor (Version 2) Red Cannonball 2406 Motor (Version 2) Red Cannonball 2406 Motor (Version 2)
Red Cannonball 2406 Motor (Version 2)
Red Cannonball 2406 Motor (Version 2) Red Cannonball 2406 Motor (Version 2) Red Cannonball 2406 Motor (Version 2) Red Cannonball 2406 Motor (Version 2)
Add to Wishlist Add to Compare
Category: 6s High Voltage Gear, Best Selling Products, Motors, Newest Products, Products

This is the new improved version of the motor with a brand new bell design. With roughly 3% more stator volume than a 2207, this is the motor for those that want the big thrust of 2207 motor but without sacrificing the low- mid range control due to lack of torque on a 22 size stator. This opens a big range of possibilities in its application for bigger propellers and heavier quads carrying a go pro as well as racers seeking the ultimate control without sacrificing top end power on the track. 

2020kv is suggested for 6s voltage. 2330kv is suggested for 5s voltage. 

  • N52H arc magnets
  • 14mm titanium alloy hollow shaft
  • Stator: 0.15mm Nippon steel silicon steel
  • Bearings: Japan NMB 9x4x4mm
  • Base casing: Al 7075
  • Bell cap: Al 7075
  • Shaft Diameter: M5
  • Bolt pattern: 16x16
  • Prop grip texture on bell top
  • Magnet slip proof lip
  • Weight: 32.5 grams with 100mm of wire
  • Weight: 30.5 grams with short wire
  • Two KV options (2020kv for 6s, 2330kv for 5s)

 

 

 


 

This is the new improved version of the motor with a brand new bell design. With roughly 3% more stator volume than a 2207, this is the motor for those that want the big thrust of 2207 motor but without sacrificing the low- mid range control due to lack of torque on a 22 size stator. This opens a big range of possibilities in its application for bigger propellers and heavier quads carrying a go pro as well as racers seeking the ultimate control without sacrificing top end power on the track. 

2020kv is suggested for 6s voltage. 2330kv is suggested for 5s voltage. 

  • N52H arc magnets
  • 14mm titanium alloy hollow shaft
  • Stator: 0.15mm Nippon steel silicon steel
  • Bearings: Japan NMB 9x4x4mm
  • Base casing: Al 7075
  • Bell cap: Al 7075
  • Shaft Diameter: M5
  • Bolt pattern: 16x16
  • Prop grip texture on bell top
  • Magnet slip proof lip
  • Weight: 32.5 grams with 100mm of wire
  • Weight: 30.5 grams with short wire
  • Two KV options (2020kv for 6s, 2330kv for 5s)