CL Racing F7 Flight Controller V2.1 MPU6000 CL Racing F7 Flight Controller V2.1 MPU6000 Catalyst Machineworks The upgraded version of the F7 board with MPU6000 gyro.  The 2.1 brings a notch in the board for camera space and slightly reconfigured jumpers.  This FC does not have an integrated PDB, making it ideal for use with 4in1 ESCs (or a PDB and separate ESCs).  It does all the latest tricks like camera control and VTX power switching and packs enough UARTs to keep most of us looking for other things to connect! Features: MCU: STM32F722RET6 216MHz 6-Axis MPU6000 gyro Build in Beta flight OSD Up to 8S(36V) direct battery power Build in Voltage monitoring resistor Build in 5V/3A BEC and 3.3V/250mA for system Led strip share 5V with 5V/3.0A BEC 5V OR VBAT, camera and VTX POWER VIA Pit Switch 6 Full UARTS: UART1, UART2, UART3, UART4, UART5, UART6 Built in Camera Control pin with necessary resistor and capacitor Buzzer pads for external buzzer VBAT Polarity protection Built in 32MB Blackbox flash chip M4 pin output can be set to M4 (most users) or M6.  RPM filtering works on both. Definitely read the manual here Voltage scale should be set to 160
Catalyst Machineworks

CL Racing F7 Flight Controller V2.1 MPU6000

Code: CM01578
Add Your Review
CL Racing F7 Flight Controller V2.1 MPU6000 CL Racing F7 Flight Controller V2.1 MPU6000 CL Racing F7 Flight Controller V2.1 MPU6000
CL Racing F7 Flight Controller V2.1 MPU6000
CL Racing F7 Flight Controller V2.1 MPU6000 CL Racing F7 Flight Controller V2.1 MPU6000 CL Racing F7 Flight Controller V2.1 MPU6000
Add to Wishlist Add to Compare
Category: Best Selling Products, Electronics, Newest Products, Products


The upgraded version of the F7 board with MPU6000 gyro.  The 2.1 brings a notch in the board for camera space and slightly reconfigured jumpers.  This FC does not have an integrated PDB, making it ideal for use with 4in1 ESCs (or a PDB and separate ESCs).  It does all the latest tricks like camera control and VTX power switching and packs enough UARTs to keep most of us looking for other things to connect!

Features:

  • MCU: STM32F722RET6 216MHz
  • 6-Axis MPU6000 gyro
  • Build in Beta flight OSD
  • Up to 8S(36V) direct battery power
  • Build in Voltage monitoring resistor
  • Build in 5V/3A BEC and 3.3V/250mA for system
  • Led strip share 5V with 5V/3.0A BEC
  • 5V OR VBAT, camera and VTX POWER VIA Pit Switch
  • 6 Full UARTS: UART1, UART2, UART3, UART4, UART5, UART6
  • Built in Camera Control pin with necessary resistor and capacitor
  • Buzzer pads for external buzzer
  • VBAT Polarity protection
  • Built in 32MB Blackbox flash chip
  • M4 pin output can be set to M4 (most users) or M6.  RPM filtering works on both.

Definitely read the manual here

Voltage scale should be set to 160


The upgraded version of the F7 board with MPU6000 gyro.  The 2.1 brings a notch in the board for camera space and slightly reconfigured jumpers.  This FC does not have an integrated PDB, making it ideal for use with 4in1 ESCs (or a PDB and separate ESCs).  It does all the latest tricks like camera control and VTX power switching and packs enough UARTs to keep most of us looking for other things to connect!

Features:

  • MCU: STM32F722RET6 216MHz
  • 6-Axis MPU6000 gyro
  • Build in Beta flight OSD
  • Up to 8S(36V) direct battery power
  • Build in Voltage monitoring resistor
  • Build in 5V/3A BEC and 3.3V/250mA for system
  • Led strip share 5V with 5V/3.0A BEC
  • 5V OR VBAT, camera and VTX POWER VIA Pit Switch
  • 6 Full UARTS: UART1, UART2, UART3, UART4, UART5, UART6
  • Built in Camera Control pin with necessary resistor and capacitor
  • Buzzer pads for external buzzer
  • VBAT Polarity protection
  • Built in 32MB Blackbox flash chip
  • M4 pin output can be set to M4 (most users) or M6.  RPM filtering works on both.

Definitely read the manual here

Voltage scale should be set to 160