GoPro Hero 9 Mount - Shocker 5" Freestyle Tank - PREORDER GoPro Hero 9 Mount - Shocker 5" Freestyle Tank - PREORDER Catalyst Machineworks INSTALLATION: APPLY HEAT TO THE ENTIRE MOUNT BEFORE INSTALLING YOUR CAMERA FOR THE FIRST TIME! INSTALL THE ND FILTER FIRST AND THEN INSTALL THE CAMERA.  This product allows you to mount a full sized GoPro Hero 9 HD camera to the Shocker 5" Frame. There is full access to the battery door on the camera. Meaning you can pull out the SD card and camera battery without having to remove the Gopro from it's mount! Press your camera and ND filter in and then fasten it to the frame with the included hardware. This is the best mount in the industry for protecting that expensive GoPro 9 investment. The front and rear walls are a double layer lattice which help to absorb impacts and save your camera from damage.  Features:  Made of tough as nails "TPU" 3D printed material Full access to camera battery/SD door  Best camera protection of any mount in the FPV industry Two layer impact absorbing walls Huge range of colors available Accepts an ND filter (ND filter sold separately) Can be used without ND filter Camera can be installed and removed quickly Fits only the Hero 9 30 degree angle bar included with purchase  Other angles (10, 20, 35, 40, 45, 50) available for purchase separately Specs:  Weight: 41g Fits the Shocker 5"  Color Options: Black, Red, Blue, White, Green, Yellow, Clear, Pink, Purple, Orange Material: 3D printed TPU Allows for adjustment from 10 - 50 degrees by changing out the angle bar  30 degree angle bar included with purchase  Includes:  1 x TPU Camera Mount 1 x 30 Degree Angle Bar 1 x Brass M3 threaded Insert 1 x M3 X 30mm Socket Head Screw    

GoPro Hero 9 Mount - Shocker 5" Freestyle Tank - PREORDER

Code: CM01729
$31.99
In Stock
Add to Wishlist Add to Compare

INSTALLATION: APPLY HEAT TO THE ENTIRE MOUNT BEFORE INSTALLING YOUR CAMERA FOR THE FIRST TIME! INSTALL THE ND FILTER FIRST AND THEN INSTALL THE CAMERA. 

This product allows you to mount a full sized GoPro Hero 9 HD camera to the Shocker 5" Frame. There is full access to the battery door on the camera. Meaning you can pull out the SD card and camera battery without having to remove the Gopro from it's mount! Press your camera and ND filter in and then fasten it to the frame with the included hardware. This is the best mount in the industry for protecting that expensive GoPro 9 investment. The front and rear walls are a double layer lattice which help to absorb impacts and save your camera from damage. 

Features: 

  • Made of tough as nails "TPU" 3D printed material
  • Full access to camera battery/SD door 
  • Best camera protection of any mount in the FPV industry
  • Two layer impact absorbing walls
  • Huge range of colors available
  • Accepts an ND filter (ND filter sold separately)
  • Can be used without ND filter
  • Camera can be installed and removed quickly
  • Fits only the Hero 9
  • 30 degree angle bar included with purchase 
  • Other angles (10, 20, 35, 40, 45, 50) available for purchase separately

Specs: 

  • Weight: 41g
  • Fits the Shocker 5" 
  • Color Options: Black, Red, Blue, White, Green, Yellow, Clear, Pink, Purple, Orange
  • Material: 3D printed TPU
  • Allows for adjustment from 10 - 50 degrees by changing out the angle bar 
  • 30 degree angle bar included with purchase 

Includes: 

1 x TPU Camera Mount 
1 x 30 Degree Angle Bar 
1 x Brass M3 threaded Insert 
1 x M3 X 30mm Socket Head Screw  

 

INSTALLATION: APPLY HEAT TO THE ENTIRE MOUNT BEFORE INSTALLING YOUR CAMERA FOR THE FIRST TIME! INSTALL THE ND FILTER FIRST AND THEN INSTALL THE CAMERA. 

This product allows you to mount a full sized GoPro Hero 9 HD camera to the Shocker 5" Frame. There is full access to the battery door on the camera. Meaning you can pull out the SD card and camera battery without having to remove the Gopro from it's mount! Press your camera and ND filter in and then fasten it to the frame with the included hardware. This is the best mount in the industry for protecting that expensive GoPro 9 investment. The front and rear walls are a double layer lattice which help to absorb impacts and save your camera from damage. 

Features: 

  • Made of tough as nails "TPU" 3D printed material
  • Full access to camera battery/SD door 
  • Best camera protection of any mount in the FPV industry
  • Two layer impact absorbing walls
  • Huge range of colors available
  • Accepts an ND filter (ND filter sold separately)
  • Can be used without ND filter
  • Camera can be installed and removed quickly
  • Fits only the Hero 9
  • 30 degree angle bar included with purchase 
  • Other angles (10, 20, 35, 40, 45, 50) available for purchase separately

Specs: 

  • Weight: 41g
  • Fits the Shocker 5" 
  • Color Options: Black, Red, Blue, White, Green, Yellow, Clear, Pink, Purple, Orange
  • Material: 3D printed TPU
  • Allows for adjustment from 10 - 50 degrees by changing out the angle bar 
  • 30 degree angle bar included with purchase 

Includes: 

1 x TPU Camera Mount 
1 x 30 Degree Angle Bar 
1 x Brass M3 threaded Insert 
1 x M3 X 30mm Socket Head Screw