Merica 7"/8"/9"/10" GoPro Canopy - (Caddx Air Unit / Vista) Merica 7"/8"/9"/10" GoPro Canopy - (Caddx Air Unit / Vista) Catalyst Machineworks This canopy is specifically designed for the Merica 8"/9"/10" to accept mounting a GoPro camera. On this same canopy you can install a GoPro 6/7, GoPro 8, GoPro 9, GoPro Session W/O ND, GoPro Session W/ ND! Camera mount is sold separate. See below for links to each camera mount that fits this canopy. This canopy is specially designed to allow you to install the Caddx Air Unit with included Nylon adapter piece. Double sided stick tape joins the adapter to the Air Unit. The adapter/Air Unit combo is then held to the underside of the canopy using the included self tapping screws. The Air Units dual antennas are joined to the back of the canopy by placing them in the appropriate holding slots and then using zip ties to hold them in place.  Features:  Sleek and sexy look Accepts a GoPro camera Nearly indestructible Light weight yet strong AF Aerodynamic  TPU material Available in multiple colors  Fits the Caddx Air Unit, Caddx Polar Air Unit, Caddx Nebula Pro, Caddx Polar Vista, original Caddx Vista Will NOT fit original DJI Air Unit Specs:  Weight: 33g Fits the 7", 8", 9" and 10" frame Color Options: Black, Red, Blue, White, Green, Yellow, Purple, Orange Camera min/max camera angle: 10 - 60 degree Fits the following camera mounts: GoPro 6/7, GoPro 8, GoPro 9, GoPro Session no ND, GoPro Session WITH ND Includes:  1 x 3D printed canopy 4 x M2 Nylock Nut Steel 4 x M2 Washer 4 x M2 X 5mm Socket Screw 4 x M2 X 18mm Socket Screw  3 x M3 X 30mm Socket Screw  1 x M3 Nylock Nut Steel 1 x 30 Degree Angle Bar  1 x 35 Degree Angle Bar  1 x 40 Degree Angle Bar  1 x 45 Degree Angle Bar2 x Self Tapping Screw #2 x 7/16" long 2 x Self Tapping Screw #2 x 5/16" long 1 x Air Unit Adapter Plate            

Merica 7"/8"/9"/10" GoPro Canopy - (Caddx Air Unit / Vista)

Code: CM01953

This canopy is specifically designed for the Merica 8"/9"/10" to accept mounting a GoPro camera. On this same canopy you can install a GoPro 6/7, GoPro 8, GoPro 9, GoPro Session W/O ND, GoPro Session W/ ND! Camera mount is sold separate. See below for links to each camera mount that fits this canopy. This canopy is specially designed to allow you to install the Caddx Air Unit with included Nylon adapter piece. Double sided stick tape joins the adapter to the Air Unit. The adapter/Air Unit combo is then held to the underside of the canopy using the included self tapping screws. The Air Units dual antennas are joined to the back of the canopy by placing them in the appropriate holding slots and then using zip ties to hold them in place. 

Features: 

  • Sleek and sexy look
  • Accepts a GoPro camera
  • Nearly indestructible
  • Light weight yet strong AF
  • Aerodynamic 
  • TPU material
  • Available in multiple colors 
  • Fits the Caddx Air Unit, Caddx Polar Air Unit, Caddx Nebula Pro, Caddx Polar Vista, original Caddx Vista
  • Will NOT fit original DJI Air Unit

Specs: 

  • Weight: 33g
  • Fits the 7", 8", 9" and 10" frame
  • Color Options: Black, Red, Blue, White, Green, Yellow, Purple, Orange
  • Camera min/max camera angle: 10 - 60 degree
  • Fits the following camera mounts: GoPro 6/7, GoPro 8, GoPro 9, GoPro Session no ND, GoPro Session WITH ND

Includes: 

1 x 3D printed canopy
4 x M2 Nylock Nut Steel
4 x M2 Washer
4 x M2 X 5mm Socket Screw
4 x M2 X 18mm Socket Screw 
3 x M3 X 30mm Socket Screw 
1 x M3 Nylock Nut Steel 
1 x 30 Degree Angle Bar 
1 x 35 Degree Angle Bar 
1 x 40 Degree Angle Bar 
1 x 45 Degree Angle Bar
2 x Self Tapping Screw #2 x 7/16" long 
2 x Self Tapping Screw #2 x 5/16" long 
1 x Air Unit Adapter Plate

 

 


 

 

 

 

This canopy is specifically designed for the Merica 8"/9"/10" to accept mounting a GoPro camera. On this same canopy you can install a GoPro 6/7, GoPro 8, GoPro 9, GoPro Session W/O ND, GoPro Session W/ ND! Camera mount is sold separate. See below for links to each camera mount that fits this canopy. This canopy is specially designed to allow you to install the Caddx Air Unit with included Nylon adapter piece. Double sided stick tape joins the adapter to the Air Unit. The adapter/Air Unit combo is then held to the underside of the canopy using the included self tapping screws. The Air Units dual antennas are joined to the back of the canopy by placing them in the appropriate holding slots and then using zip ties to hold them in place. 

Features: 

  • Sleek and sexy look
  • Accepts a GoPro camera
  • Nearly indestructible
  • Light weight yet strong AF
  • Aerodynamic 
  • TPU material
  • Available in multiple colors 
  • Fits the Caddx Air Unit, Caddx Polar Air Unit, Caddx Nebula Pro, Caddx Polar Vista, original Caddx Vista
  • Will NOT fit original DJI Air Unit

Specs: 

  • Weight: 33g
  • Fits the 7", 8", 9" and 10" frame
  • Color Options: Black, Red, Blue, White, Green, Yellow, Purple, Orange
  • Camera min/max camera angle: 10 - 60 degree
  • Fits the following camera mounts: GoPro 6/7, GoPro 8, GoPro 9, GoPro Session no ND, GoPro Session WITH ND

Includes: 

1 x 3D printed canopy
4 x M2 Nylock Nut Steel
4 x M2 Washer
4 x M2 X 5mm Socket Screw
4 x M2 X 18mm Socket Screw 
3 x M3 X 30mm Socket Screw 
1 x M3 Nylock Nut Steel 
1 x 30 Degree Angle Bar 
1 x 35 Degree Angle Bar 
1 x 40 Degree Angle Bar 
1 x 45 Degree Angle Bar
2 x Self Tapping Screw #2 x 7/16" long 
2 x Self Tapping Screw #2 x 5/16" long 
1 x Air Unit Adapter Plate