WhoopMaster All Weather Upgrade WhoopMaster All Weather Upgrade Catalyst Machineworks This upgrade allow you to build your WhoopMaster into all All Weather whoop. With this upgrade you can fly in rain, snow, mist, etc... This means the electronics are housed in an enclosure that is highly water resistant. The ESC is mounted to an aluminum midplate which serves to both seal the bottom side of the enclosure and pull heat away from the ESC. The VTX is mounted to an aluminum heat sink that serves to seal the top portion of the enclosure and pull heat away from the VTX. We will be producing a full detailed video tutorial on how to install this into your WhoopMaster. This kit will only work with a 20x20mm micro ESC/FC stack and either the Caddx Vista or Runcam Link HD systems. You can mount a receiver inside the enclosure but keep in mind accessing the RX bind bottom will be cumbersome after the enclosure is buttoned up. For each access to your receiver at any time we suggest THIS box made specifically for it!  Includes: 1 pc: Machined 7075 silver aluminum midplate (heat sink)1 pc: Machined 7075 silver aluminum top plate (heat sink)1 pc: Water resistant TPU enclosure skirt (pic color)2 pcs: ESC motor wire grommet  4 pcs: #2 x 5/16" long self tapping phillip head screw 4 pcs: M2 X 16mm Screw 4 pcs: M2 nylock nut  4 pcs: M3 X 20mm Screw 8 pcs: M3 black plastic nut4 pcs: M3 X 6mm white plastic sleeve4 pcs: M3 X 3mm white plastic sleeve Not included but required: Thermal Adhesive Tape E6000 or Liquid Electrical Tape 1oz Tube Non-conductive thermal paste (we are still looking into the best option)   ***DO NOT SUBMERGE YOUR WHOOPMASTER IN WATER. THIS KIT IS NOT DESIGNED FOR PRESSURIZED WATER***    

WhoopMaster All Weather Upgrade

Code: CM02035
$44.99
In Stock
Add to Wishlist Add to Compare

This upgrade allow you to build your WhoopMaster into all All Weather whoop. With this upgrade you can fly in rain, snow, mist, etc... This means the electronics are housed in an enclosure that is highly water resistant. The ESC is mounted to an aluminum midplate which serves to both seal the bottom side of the enclosure and pull heat away from the ESC. The VTX is mounted to an aluminum heat sink that serves to seal the top portion of the enclosure and pull heat away from the VTX. We will be producing a full detailed video tutorial on how to install this into your WhoopMaster. This kit will only work with a 20x20mm micro ESC/FC stack and either the Caddx Vista or Runcam Link HD systems. You can mount a receiver inside the enclosure but keep in mind accessing the RX bind bottom will be cumbersome after the enclosure is buttoned up. For each access to your receiver at any time we suggest THIS box made specifically for it! 

Includes:

1 pc: Machined 7075 silver aluminum midplate (heat sink)
1 pc: Machined 7075 silver aluminum top plate (heat sink)
1 pc: Water resistant TPU enclosure skirt (pic color)
2 pcs: ESC motor wire grommet 
4 pcs: #2 x 5/16" long self tapping phillip head screw 
4 pcs: M2 X 16mm Screw 
4 pcs: M2 nylock nut 
4 pcs: M3 X 20mm Screw 
8 pcs: M3 black plastic nut

4 pcs: M3 X 6mm white plastic sleeve
4 pcs: M3 X 3mm white plastic sleeve

Not included but required:

Thermal Adhesive Tape 
E6000 or Liquid Electrical Tape 1oz Tube
Non-conductive thermal paste (we are still looking into the best option)

 

***DO NOT SUBMERGE YOUR WHOOPMASTER IN WATER. THIS KIT IS NOT DESIGNED FOR PRESSURIZED WATER***

 

 

This upgrade allow you to build your WhoopMaster into all All Weather whoop. With this upgrade you can fly in rain, snow, mist, etc... This means the electronics are housed in an enclosure that is highly water resistant. The ESC is mounted to an aluminum midplate which serves to both seal the bottom side of the enclosure and pull heat away from the ESC. The VTX is mounted to an aluminum heat sink that serves to seal the top portion of the enclosure and pull heat away from the VTX. We will be producing a full detailed video tutorial on how to install this into your WhoopMaster. This kit will only work with a 20x20mm micro ESC/FC stack and either the Caddx Vista or Runcam Link HD systems. You can mount a receiver inside the enclosure but keep in mind accessing the RX bind bottom will be cumbersome after the enclosure is buttoned up. For each access to your receiver at any time we suggest THIS box made specifically for it! 

Includes:

1 pc: Machined 7075 silver aluminum midplate (heat sink)
1 pc: Machined 7075 silver aluminum top plate (heat sink)
1 pc: Water resistant TPU enclosure skirt (pic color)
2 pcs: ESC motor wire grommet 
4 pcs: #2 x 5/16" long self tapping phillip head screw 
4 pcs: M2 X 16mm Screw 
4 pcs: M2 nylock nut 
4 pcs: M3 X 20mm Screw 
8 pcs: M3 black plastic nut

4 pcs: M3 X 6mm white plastic sleeve
4 pcs: M3 X 3mm white plastic sleeve

Not included but required:

Thermal Adhesive Tape 
E6000 or Liquid Electrical Tape 1oz Tube
Non-conductive thermal paste (we are still looking into the best option)

 

***DO NOT SUBMERGE YOUR WHOOPMASTER IN WATER. THIS KIT IS NOT DESIGNED FOR PRESSURIZED WATER***